800C750JTN2500X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
800C750JTN2500X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 800C750JTN2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 800C750JTN2500X |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 800C750JTN2500X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 800C750JTN2500X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 800C750JTN2500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
800C750JTN2500X: 75.0 pF at 2500 V in the case C outline
Read 800C750JTN2500X from the left and the order is already fixed. 800C names the series, the C is case C at 0.250 inch square, 750 is the capacitance code, two significant digits followed by the count of zeros, which lands on 75.0 pF, J sets the window at plus or minus 5 percent, TN is the non-magnetic tin termination over a non-magnetic barrier, 2500 is the working voltage in volts DC, and X is the laser marking. The string stops at X, so the packing letter is a separate line on the order rather than part of the number.
| Series and case | 800C in case C, a 0.250 inch square outline, 6.35 mm by 6.35 mm overall |
| Capacitance | 75.0 pF, code 750 |
| Tolerance | J, plus or minus 5 percent, a window of 71.2 to 78.8 pF |
| Working voltage | 2500 VDC, 1768 V RMS on a sine wave |
| Dielectric withstanding | 3750 V for five seconds, 150 percent of the working voltage |
| Life test | 2500 V for 2000 hours at 125 degrees C, 100 percent of the working voltage |
| Temperature coefficient | zero plus or minus 30 ppm per degree C, minus 55 to plus 125 C |
| Operating range | minus 55 to plus 125 degrees C, no derating of working voltage |
| Quality factor | greater than 2000 at 1 MHz |
| Series resistance | 0.0005 ohm maximum at 1 MHz, the tighter of the two printed limits |
| Insulation resistance at 25 C | 10^5 Mohm minimum at the rated working voltage |
| Insulation resistance at 125 C | 10^4 Mohm minimum at the rated working voltage |
| Body thickness | 5.08 mm maximum, 0.200 inch, on every value in the case |
| Termination overlap | 1.02 mm, 0.040 inch, on every value in the case |
| Terminal strength | 10 lbs minimum and 20 lbs typical for five seconds, MIL-STD-202 method 211 |
| Drift and retrace | plus or minus 0.02 percent or 0.02 pF, whichever is greater |
| Aging and piezoelectric effects | none stated for both on this sheet |
| Stored energy | 234 microjoule at 2500 V, from one half C V squared |
| Stored charge | 188 nanocoulomb at 2500 V |
| Reactance at 150 MHz | 14.1 ohm nominal |
TDS-RFM-0023 prints one capacitance range for the series, 2.2 pF to 3000 pF, and one operating range for all of it, minus 55 to plus 125 degrees C with no derating of working voltage. What moves inside the range is the voltage a value is offered at: the small capacitances carry the full 3600 V, the middle of the table steps to 2500 V and the large values step down again. On this page the pair is 75.0 pF and 2500 V.
Nothing in 800C750JTN2500X is optional once the drawing exists: case letter, capacitance code, tolerance letter and voltage field all have to match, and only the packing letter at the end, the one this number leaves off, is a free choice. On the 75.0 pF value at 2500 V that leaves plus or minus 5 percent as the acceptance window and 2500 V as the rating the board has to survive.
Case C body and the horizontal pad for 75.0 pF
The body is 5.84 mm long on the 230 mil dimension with plus 0.64 and minus 0.25 mm, 6.35 mm wide plus or minus 0.38 mm and 5.08 mm thick at the maximum, with 1.02 mm of termination overlap on each end. That is a much larger block than the 0.110 inch case, so the 75.0 pF part at 2500 V changes what the placement nozzle and the reflow profile have to handle, not just what the pad drawing says.
There is no vertical mount row for this case, so the 75.0 pF part at 2500 V is always laid flat, and the choice is only normal or high density: A 7.11, B 1.27, C 5.08 and D 7.62 mm against A 6.60, B 0.76, C 5.08 and D 6.60 mm. The 1.02 mm overlap is the space the solder fillet has to form in on both ends, and it does not shrink with the tighter row.
Electrical limits at 2500 VDC
The electrical identity of 800C750JTN2500X is a zero plus or minus 30 ppm per degree C coefficient over minus 55 to plus 125 degrees C, no derating of working voltage across that range, a quality factor above 2000 at 1 MHz with 0.0005 ohm maximum at 1 MHz, the tighter of the two printed limits, and 2500 VDC working with a withstanding test at 3750 V for five seconds, which is 150 percent of the rating.
The qualification block is MIL-STD-202 in three places, method 107 condition A for thermal shock, method 106 for moisture resistance, and method 103 condition A for low voltage humidity at 85 degrees C and 85 percent for 240 hours with 1.5 VDC applied. For the 75.0 pF part at 2500 V the tests do not change with the value, only the working voltage does, and the sheet names no EIA-198, MIL-PRF-55681 or QPL listing for the series.
What 75.0 pF does from 30 MHz to 1 GHz
At 30 MHz the 75.0 pF body at 2500 V presents 70.7 ohm, at 150 MHz 14.1 ohm, at 500 MHz 4.24 ohm and at 1 GHz 2.12 ohm, and on a 50 ohm line the value reaches 50 ohm at about 42.4 MHz, inside the band. Those four numbers are what a coupling, bypass or tuning position is built around, and they are why the capacitance code is quoted with the voltage field: the same body behaves as a different element once the reactance leaves the window the stage can tune. The J window of 71.2 to 78.8 pF reads 13.5 ohm at the top and 14.9 ohm at the bottom against 14.1 ohm nominal at 150 MHz, so the band spreads the reactance by 1.42 ohm, 10.0 percent of the nominal on a 2500 V part.
The loss statement for the 75.0 pF part at 2500 V is a quality factor above 2000 at 1 MHz plus 0.0005 ohm maximum at 1 MHz, the tighter of the two printed limits, and the thermal note behind the current curve is a 65 C mounting surface with 15 C per watt, 4 W giving a 125 C case. That is why a value this large is bought with its mounting and its copper area in mind, not only with its printed capacitance.
A 75.0 pF part at 2500 V held to zero plus or minus 30 ppm per degree C drifts about 0.4050 pF from minus 55 to plus 125 degrees C, which is 0.076 ohm against the 14.1 ohm nominal at 150 MHz. On a high power stage that figure is small next to the tolerance window, and the two are read together when a tuned position is signed off.
Sourcing the 75.0 pF value and the second source
Because 800C750JTN2500X ends at the marking field, packing is quoted with the order: T for tape and reel at 500 pieces, T250 or T at 250, J36 or J180 on a tray of 36 or 180, J24 or J60 on a tray of 24 or 60, or B24 in a box of 24. On a 75.0 pF order at 2500 V that count sets how many boards one package covers. RF Component Sourcing, Component Lead Time Solutions, Kitting Service covers the sourcing side for a board that needs its other RF parts as well, and SUPERB supports radio frequency, medical, telecom, military and radar builds from component supply through assembly and test, with this series supplied through channel stock.
At 2500 V and 75.0 pF the buying question is not only price: the package size, the date code and the storage grade set what the line can run. A replacement is checked on the four fields the order code exposes, capacitance, tolerance, voltage and case, and only then on the certificate.
For the 75.0 pF value at 2500 V the sourcing conversation is short if the drawing is in hand: capacitance code, tolerance letter, voltage field and case, then the packing quantity. Everything after that is date code, packing and freight, and those are quoted rather than assumed.