Contact Us

800C561GT1000X KYOCERA AVX RF Capacitor

Brand: ATC
The 800C561GT1000X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

800C561GT1000X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 800C561GT1000X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number800C561GT1000X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number800C561GT1000X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 800C561GT1000X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 800C561GT1000X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

800C561GT1000X: 560 pF at 1000 V in the case C high RF power body

Read 800C561GT1000X from the left and every field is settled but the packing letter. 800C names the series, C is case C at 0.250 inch square, 561 is the capacitance code, two significant digits and a count of zeros, which reads 560 pF, G holds the window at plus or minus 2 percent, T is the tin over nickel barrier termination, 1000 is the working voltage in volts DC and X is the laser marking. The 800C line runs 2.2 pF to 3000 pF, so on a 560 pF part the code and the voltage field are what separate it from the next reel in the store.

Series and case800C in case C, the 0.250 inch square high RF power body
Capacitance560 pF, code 561
ToleranceG, plus or minus 2 percent, a window of 549 to 571 pF
Working voltage1000 VDC, 707 V RMS on a sine wave
Dielectric withstanding1500 V for five seconds, 150 percent of the rating above 500 V up to 1250 V
Life test1200 V for 2000 hours at 125 C, 120 percent of the rating above 500 V up to 1250 V
Temperature coefficientzero plus or minus 30 ppm per degree C, minus 55 to plus 125 C
Operating rangeminus 55 to plus 125 degrees C, no derating of working voltage
Quality factorgreater than 2,000 at 1 MHz across the whole 2.2 to 3000 pF range
ESR limit0.0005 ohm maximum at 1 MHz, the figure the sheet prints for above 10 pF
Insulation resistance at 25 C10^5 Mohm minimum at the rated working voltage, test capped at 500 VDC
Insulation resistance at 125 C10^4 Mohm minimum at the rated working voltage, test capped at 500 VDC
Body length0.230 plus 0.025 minus 0.010 inch, 5.84 plus 0.64 minus 0.25 mm
Body width0.250 plus or minus 0.015 inch, 6.35 plus or minus 0.38 mm
Body thickness0.200 inch, 5.08 mm maximum, on every value in the case
Termination overlap0.040 inch, 1.02 mm maximum, tin over nickel barrier
Terminal strength10 lbs minimum and 20 lbs typical for five seconds, MIL-STD-202 method 211
Drift and retraceplus or minus 0.02 percent or 0.02 pF, retrace none, aging none
Stored energy280 microjoule at 1000 V, from one half C V squared
Reactance at 150 MHz1.89 ohm nominal

One capacitance range is printed for the series, 2.2 pF to 3000 pF, and one operating range for all of it, minus 55 to plus 125 degrees C with no derating of working voltage. The 560 pF part at 1000 V sits inside that range, so the fields that move down the table are the value and the voltage rather than the case.

Nothing in 800C561GT1000X is free once the drawing exists: case letter, capacitance code, tolerance and voltage field all have to match, and only the packing letter at the end is a choice. On the 560 pF part at 1000 V the acceptance window is plus or minus 2 percent, written as 549 to 571 pF, and the rating the board has to survive is 1000 V.

Case C body and the tin over nickel barrier on 560 pF

The body is 0.230 plus 0.025 minus 0.010 inch long and 0.250 plus or minus 0.015 inch wide, which is 5.84 plus 0.64 minus 0.25 mm by 6.35 plus or minus 0.38 mm, with 0.200 inch, 5.08 mm, of thickness at the maximum. On the 560 pF part at 1000 V that footprint is what the stencil aperture and the placement nozzle have to carry.

There is no vertical mount variant on this page: the T termination is the microstrip style, so the 560 pF part at 1000 V is always laid flat with the barrier face down on the pad. The 1.02 mm overlap sets where the solder stops, and the 5.08 mm maximum thickness sets what a cover or a shield can clear.

Electrical limits at 1000 VDC

The electrical identity of 800C561GT1000X is a zero plus or minus 30 ppm per degree C coefficient over minus 55 to plus 125 degrees C with no derating, plus or minus 2 percent, and a withstanding test of 150 percent on any rating above 500 V up to 1250 V, which is 1500 V for five seconds on this part. The 2000 hour life test at 125 degrees C runs at 120 percent of the rating, which is 1200 V, because the sheet ties that same tier to the same range.

The environmental block is MIL-STD-202 in four places: method 107 condition A for thermal shock, method 106 for moisture resistance, method 103 condition A for low voltage humidity at 85 degrees C and 85 percent for 240 hours with 1.5 V applied, and method 108 for the 2000 hour life test. None of it changes with the value, so the 560 pF part at 1000 V inherits the same schedule.

What 560 pF does from 30 MHz to 1 GHz

At 30 MHz the 560 pF body at 1000 V presents 9.47 ohm, at 150 MHz 1.89 ohm, at 500 MHz 0.57 ohm and at 1 GHz 0.28 ohm, and on a 50 ohm line the value is already below 50 ohm at the bottom of the band, because the crossing sits at about 5.7 MHz. Those four numbers are what a coupling, bypass or tuning position is built around. The G window of 549 to 571 pF reads 1.86 ohm at the top and 1.93 ohm at the bottom against 1.89 ohm nominal at 150 MHz, a spread of 0.08 ohm, 4.0 percent of nominal on a 1000 V part.

The loss statement for the 560 pF part at 1000 V is greater than 2,000 at 1 MHz with an ESR ceiling of 0.0005 ohm at 1 MHz, the tier the sheet prints for above 10 pF. No current rating is printed for this case, so a 1000 V amplifier stage is checked on Q, on ESR and on the cooling path rather than on a single amperage.

A 560 pF part at 1000 V held to zero plus or minus 30 ppm per degree C drifts about 3.0240 pF from minus 55 to plus 125 degrees C, which is 0.010 ohm against the 1.89 ohm nominal at 150 MHz. On a 1000 V stage that figure sits inside the tolerance window, and the two are read together when a tuned position is signed off.

Sourcing the 560 pF value and the second source

Because 800C561GT1000X ends at the marking field, packing is quoted with the order: T or T250 for tape and reel at 500 pieces, J36 or J180 for a tray of 36 or 180, J24 or J60 for a tray of 24 or 60, or B24 in a box of 24. On a 560 pF order at 1000 V that count sets how many boards one package covers. RF Component Sourcing, Component Lead Time Solutions, Kitting Service covers the sourcing side for a board that needs its other RF parts as well.

At 1000 V and 560 pF the buying question is not only price: package size, date code and storage grade set what the line can run. A replacement is checked on the four fields the order code exposes, capacitance, tolerance, voltage and case, and only then on the certificate.

For the 560 pF value at 1000 V the sourcing conversation is short once the drawing is in hand: capacitance code, tolerance letter, voltage field and case, then the packing quantity. Everything after that is date code, packing and freight, and those are quoted rather than assumed.