Contact Us

800C391GT1000X KYOCERA AVX RF Capacitor

Brand: ATC
The 800C391GT1000X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

800C391GT1000X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 800C391GT1000X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number800C391GT1000X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number800C391GT1000X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 800C391GT1000X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 800C391GT1000X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

800C391GT1000X: 390 pF at 1000 V in the case C high RF power body

Six decisions sit inside 800C391GT1000X: series 800C, case C, 391 is the capacitance code, two significant digits and a count of zeros, which reads 390 pF, tolerance G fixed at plus or minus 2 percent, termination T, the voltage field 1000 and the laser marking X. On the 390 pF part at 1000 V the two fields a goods in check reads first are the capacitance code and the voltage field, because the case and the dielectric are common to the whole 2.2 to 3000 pF range.

Series and case800C in case C, the 0.250 inch square high RF power body
Capacitance390 pF, code 391
ToleranceG, plus or minus 2 percent, a window of 382 to 398 pF
Working voltage1000 VDC, 707 V RMS on a sine wave
Dielectric withstanding1500 V for five seconds, 150 percent of the rating above 500 V up to 1250 V
Life test1200 V for 2000 hours at 125 C, 120 percent of the rating above 500 V up to 1250 V
Temperature coefficientzero plus or minus 30 ppm per degree C, minus 55 to plus 125 C
Operating rangeminus 55 to plus 125 degrees C, no derating of working voltage
Quality factorgreater than 2,000 at 1 MHz across the whole 2.2 to 3000 pF range
ESR limit0.0005 ohm maximum at 1 MHz, the figure the sheet prints for above 10 pF
Insulation resistance at 25 C10^5 Mohm minimum at the rated working voltage, test capped at 500 VDC
Insulation resistance at 125 C10^4 Mohm minimum at the rated working voltage, test capped at 500 VDC
Body length0.230 plus 0.025 minus 0.010 inch, 5.84 plus 0.64 minus 0.25 mm
Body width0.250 plus or minus 0.015 inch, 6.35 plus or minus 0.38 mm
Body thickness0.200 inch, 5.08 mm maximum, on every value in the case
Termination overlap0.040 inch, 1.02 mm maximum, tin over nickel barrier
Terminal strength10 lbs minimum and 20 lbs typical for five seconds, MIL-STD-202 method 211
Drift and retraceplus or minus 0.02 percent or 0.02 pF, retrace none, aging none
Stored energy195 microjoule at 1000 V, from one half C V squared
Reactance at 150 MHz2.72 ohm nominal

The series runs one case and one dielectric from 2.2 pF to 3000 pF, and the field that changes down that table is the capacitance. On the 390 pF value the part is printed at 1000 V, and the tolerance letter G fixes the window at plus or minus 2 percent on top of it, so a 390 pF part at another voltage is another line on the same sheet rather than another family.

The tolerance letter deserves a second look before the order goes out: G is not a grade, and on the 390 pF value at 1000 V it pins the part to plus or minus 2 percent, a band of 382 to 398 pF. A letter that reads close on a quotation can double that band, so 390 pF at 1000 V is matched against the drawing and not against the family name.

Case C body and the tin over nickel barrier on 390 pF

For the 390 pF part at 1000 V the body measures 5.84 mm by 6.35 mm with a 5.08 mm maximum thickness, and the overlap is 1.02 mm at each end. The pull figure is 10 lbs minimum against 20 lbs typical for five seconds to method 211, and those two numbers, rather than the nominal case size, decide how much force placement and depaneling may put on a 1000 V body.

The overlap is where the solder fillet forms, 0.040 inch, 1.02 mm, at both ends and at the maximum. The 390 pF part at 1000 V therefore asks for a pad that leaves that strip clear, because a fillet that climbs onto the body changes the stress the ceramic sees during thermal cycling.

Electrical limits at 1000 VDC

For 800C391GT1000X at 1000 V the limits are a withstanding test at 1500 V for five seconds and a life test at 1200 V for 2000 hours at 125 degrees C. Both sit in the 150 percent and 120 percent tier, which the sheet applies above 500 V up to 1250 V; the 250 percent and 200 percent tiers belong to the 500 V and below values and do not apply here.

Two of those figures are easy to misread. Insulation resistance is quoted at the rated working voltage but with the test capped at 500 VDC, so a 390 pF body at 1000 V is never tested at its rating on a bench supply: 10^5 Mohm at 25 degrees C and 10^4 Mohm at 125 degrees C are the two numbers to hold.

What 390 pF does from 30 MHz to 1 GHz

On the 390 pF code at 1000 V the reactance column reads 13.6 ohm at 30 MHz, 2.72 ohm at 150 MHz, 0.82 ohm at 500 MHz and 0.41 ohm at 1 GHz, and the value is already below 50 ohm at the bottom of the band, because the crossing sits at about 8.2 MHz. A body this size is bought for the shift it adds to a node rather than for its printed number. The G window of 382 to 398 pF reads 2.67 ohm at the top and 2.78 ohm at the bottom against 2.72 ohm nominal at 150 MHz, a spread of 0.11 ohm, 4.0 percent of nominal on a 1000 V part.

Quality factor for the 390 pF value at 1000 V is greater than 2,000 at 1 MHz, and the sheet also prints an ESR ceiling rather than leaving it to a curve: 0.0005 ohm maximum at 1 MHz for above 10 pF. That is 0.5 milliohm, which is the figure a 1000 V stage is checked against.

Over minus 55 to plus 125 degrees C the 30 ppm per degree C coefficient moves a 390 pF body at 1000 V by roughly 2.1060 pF, which at 150 MHz is 0.015 ohm against the 2.72 ohm it presents nominally. That drift is why the 390 pF value is quoted with its coefficient and its window together.

Sourcing the 390 pF value and the second source

For 800C391GT1000X at 1000 V the order needs the capacitance code, the tolerance letter, the voltage field and a packing quantity, and nothing else on this page moves the price of a package. RF Component Sourcing, Obsolete RF Part Replacement, Incoming Inspection Plan carries the sourcing side, and SUPERB supports radio frequency, medical, telecom, military and radar builds from component supply through assembly and test, with this series supplied through channel stock.

A 390 pF part at 1000 V is a line item before it is a component, so the order carries the package quantity, the date code and the incoming check together with the part number. Where the value has to be replaced, the second source is matched on capacitance, tolerance, voltage and case before a sample reaches the line.

On a 390 pF part at 1000 V the practical sourcing risk is substitution, not availability: a part with the same capacitance and a wider window fits the pad and fails the stage. The four fields to compare are capacitance, tolerance, voltage and case, and the packing code then decides how many boards one package covers.