800C221GT2500X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
800C221GT2500X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 800C221GT2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 800C221GT2500X |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 800C221GT2500X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 800C221GT2500X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 800C221GT2500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
800C221GT2500X: 220 pF at 2500 V in the case C high RF power body
Field by field, 800C221GT2500X reads series 800C, case C, 221 is the capacitance code, two significant digits and a count of zeros, which reads 220 pF, tolerance G giving plus or minus 2 percent, termination T over a nickel barrier, a voltage field of 2500 and laser marking X. The sheet makes one NPO dielectric and one case from 2.2 pF to 3000 pF, and the 220 pF value at 2500 V is one line on that table rather than a general example.
| Series and case | 800C in case C, the 0.250 inch square high RF power body |
| Capacitance | 220 pF, code 221 |
| Tolerance | G, plus or minus 2 percent, a window of 216 to 224 pF |
| Working voltage | 2500 VDC, 1768 V RMS on a sine wave |
| Dielectric withstanding | 3000 V for five seconds, 120 percent of the rating above 1250 V |
| Life test | 2500 V for 2000 hours at 125 C, 100 percent of the rating above 1250 V |
| Temperature coefficient | zero plus or minus 30 ppm per degree C, minus 55 to plus 125 C |
| Operating range | minus 55 to plus 125 degrees C, no derating of working voltage |
| Quality factor | greater than 2,000 at 1 MHz across the whole 2.2 to 3000 pF range |
| ESR limit | 0.0005 ohm maximum at 1 MHz, the figure the sheet prints for above 10 pF |
| Insulation resistance at 25 C | 10^5 Mohm minimum at the rated working voltage, test capped at 500 VDC |
| Insulation resistance at 125 C | 10^4 Mohm minimum at the rated working voltage, test capped at 500 VDC |
| Body length | 0.230 plus 0.025 minus 0.010 inch, 5.84 plus 0.64 minus 0.25 mm |
| Body width | 0.250 plus or minus 0.015 inch, 6.35 plus or minus 0.38 mm |
| Body thickness | 0.200 inch, 5.08 mm maximum, on every value in the case |
| Termination overlap | 0.040 inch, 1.02 mm maximum, tin over nickel barrier |
| Terminal strength | 10 lbs minimum and 20 lbs typical for five seconds, MIL-STD-202 method 211 |
| Drift and retrace | plus or minus 0.02 percent or 0.02 pF, retrace none, aging none |
| Stored energy | 687 microjoule at 2500 V, from one half C V squared |
| Reactance at 150 MHz | 4.82 ohm nominal |
Across 2.2 pF to 3000 pF the body stays case C and the NPO dielectric stays the same, while the value and the rated voltage change line by line. On the 220 pF value this page carries 2500 V with a G window, and those two fields are what the goods in check reads against the label.
Because 800C221GT2500X stops at the marking field, the packing code is quoted with the order and nothing else is left loose. For the 220 pF value at 2500 V the three fields read at goods in are the capacitance code 221, the tolerance letter G and the voltage field 2500, and all three sit inside the part number.
Case C body and the tin over nickel barrier on 220 pF
Mechanically the 220 pF value at 2500 V is a case C body with 0.040 inch, 1.02 mm, of termination overlap at each end, tin plated over a nickel barrier. Terminal strength is printed as 10 lbs minimum and 20 lbs typical for five seconds to MIL-STD-202 method 211, so a 2500 V part of this size takes a pull that a fixture has to stay under when the board is clamped for test.
Printed as inches and millimetres the case reads 0.230 by 0.250 by 0.200, which is 5.84 by 6.35 by 5.08 mm at the maximum on each field. On the 220 pF part at 2500 V the assembly drawing names the pad, and the pad has to leave 1.02 mm of barrier exposed at each end for the fillet.
Electrical limits at 2500 VDC
On 800C221GT2500X the voltage story is a 2500 V rating, a withstanding test at 3000 V for five seconds, the 120 percent tier the sheet prints for anything above 1250 V, and a 2000 hour life test at 125 degrees C held at 2500 V, the 100 percent figure for the same range. Around that the sheet fixes a 30 ppm per degree C coefficient and plus or minus 2 percent.
Receiving inspection on a 220 pF part at 2500 V usually starts with drift and retrace, plus or minus 0.02 percent or 0.02 pF, whichever is greater, because it bounds what a tuned stage sees after a thermal cycle. Retrace, aging and piezoelectric effects are all stated as none, and the sheet names no EIA-198, MIL-PRF-55681 or QPL listing.
What 220 pF does from 30 MHz to 1 GHz
Read as reactance the 220 pF part at 2500 V is 24.1 ohm at 30 MHz, 4.82 ohm at 150 MHz, 1.45 ohm at 500 MHz and 0.72 ohm at 1 GHz, and against 50 ohm it reaches 50 ohm at about 14.5 MHz, inside the band. Below self resonance the body behaves as a capacitor and the figure falls with frequency, above it the same body turns inductive. The G window of 216 to 224 pF reads 4.73 ohm at the top and 4.92 ohm at the bottom against 4.82 ohm nominal at 150 MHz, a spread of 0.19 ohm, 4.0 percent of nominal on a 2500 V part.
At 2500 V the 220 pF value holds 4.82 ohm at 150 MHz and its loss budget is greater than 2,000 at 1 MHz with ESR capped at 0.0005 ohm, 0.5 milliohm, for above 10 pF. Because no amperage is printed, the current a 220 pF body can carry at 2500 V is read from the supplier curve for the mounting.
Temperature is the other half of the frequency picture. The coefficient is zero plus or minus 30 ppm per degree C, so a 220 pF part at 2500 V moves by about 1.1880 pF over the full minus 55 to plus 125 degrees C range, which at 150 MHz is 0.026 ohm on top of the accepted window.
Sourcing the 220 pF value and the second source
A 220 pF part at 2500 V ships on tape and reel at 500 pieces, on a tray of 36, 180, 24 or 60, or in a box of 24, and the packing code is a line on the order rather than a field inside the part number. Component Lead Time Solutions, Pin to Pin Cross Reference, Kitting Service holds the sourcing path, and a second source is matched on capacitance, tolerance, voltage and case before a sample is released, because another case changes the pad and a wider tolerance changes the window.
For a 220 pF value rated at 2500 V the order needs the capacitance code, the tolerance letter, the voltage field and a packing quantity, and nothing else changes the price of the package. Incoming inspection then reads the marking, measures against the G window and confirms the voltage field on the label.
Package and lot records travel with the 220 pF part at 2500 V, because a value this small at this voltage is hard to confirm on a meter that was not zeroed. The order records packing code, date code and quantity, and the incoming check is written against those fields so a later build traces back to the same lot.