800B561JT100XT KYOCERA AVX RF Capacitor 100 V
Product Specifications
PRODUCT SPECIFICATIONS
800B561JT100XT — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 800B561JT100XT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 800B561JT100XT |
| Manufacturer | KYOCERA AVX |
| Voltage Rating | 100 V |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 800B561JT100XT |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 800B561JT100XT from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 800B561JT100XT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
800B561JT100XT: 560 pF at 100 V in the case B outline
Read 800B561JT100XT from the left and the order is already fixed. 800B names the series, case B puts the body at 0.110 inch square, 561 is the capacitance code, two significant digits followed by the count of zeros, which lands on 560 pF, J sets the window at plus or minus 5 percent, T is the tin plated termination over a nickel barrier, 100 is the working voltage in volts DC, and the closing X and T stand for laser marking and tape and reel. Nothing on the number is a packing preference that can be changed later without a new order line.
| Series and case | 800B in case B, a 0.110 inch square outline, 2.79 mm by 2.79 mm |
| Capacitance | 560 pF, code 561 |
| Tolerance | J, plus or minus 5 percent, a window of 532 to 588 pF |
| Working voltage | 100 VDC |
| Dielectric withstanding | 250 V for five seconds, 250 percent of the working voltage |
| Life test | 200 V for 2000 hours at 125 degrees C, 200 percent of the working voltage |
| Temperature coefficient | zero plus or minus 30 ppm per degree C, minus 55 to plus 125 C |
| Operating range | minus 55 to plus 125 degrees C, no derating of working voltage |
| Quality factor | greater than 2000 at 1 MHz |
| Insulation resistance at 25 C | 10^5 Mohm minimum at the rated working voltage |
| Insulation resistance at 125 C | 10^4 Mohm minimum at the rated working voltage |
| Body thickness | 1.78 mm maximum, 0.070 inch, on every value in the case |
| Termination overlap | 0.38 mm plus or minus 0.25 mm, 0.015 inch plus or minus 0.010 |
| Terminal strength | 5 lbs minimum and 15 lbs typical for five seconds, MIL-STD-202 method 211 |
| Drift and retrace | plus or minus 0.02 percent or 0.02 pF, whichever is greater |
| Aging and piezoelectric effects | none stated for both on this sheet |
| Stored energy | 2.80 microjoule at 100 V, from one half C V squared |
| Stored charge | 56.0 nanocoulomb at 100 V |
| Reactance at 150 MHz | 1.89 ohm nominal |
| Reactance at 500 MHz | 0.57 ohm nominal |
TDS-RFM-0022 prints one capacitance range for the series, 0.1 pF to 1000 pF, and one operating range for all of it, minus 55 to plus 125 degrees C with no derating of working voltage. What changes inside the range is the working voltage the value is offered at, and on 800B561JT100XT that field reads 100 V, with a 560 pF capacitance and a J tolerance window.
One field deserves a second look before the order is placed: J is a tolerance letter, not a grade, and on the 560 pF value it holds the part to plus or minus 5 percent, a band of 532 to 588 pF. Any letter that looks close on the order can widen this window by a factor of two or more, so the tolerance field is checked against the drawing rather than taken from the family name.
Case B body and the mounting land for 560 pF
The body is a 0.110 inch square, 2.79 mm by 2.79 mm, with a length tolerance of plus 0.51 and minus 0.25 mm on 2.79 mm and a width of 2.79 mm plus or minus 0.38 mm. Thickness is 1.78 mm at the maximum and the termination overlap is 0.38 mm plus or minus 0.25 mm, so the ceramic sits proud of the metal by a controlled amount rather than by whatever the plating run gave. A 560 pF part at 100 V takes the same case as every other value in the series.
Two mount rows are printed for case B and each has a normal and a high density column. Vertical mount gives A 2.29, B 1.27 and C 1.91 mm normal, and A 1.78, B 0.76 and C 1.91 mm high density. Horizontal mount gives A 3.30, B 1.27 and C 1.91 mm normal, and A 2.79, B 0.76 and C 1.91 mm high density. Both columns apply to every value, so the 560 pF part chooses a row, not a land.
Electrical limits at 100 VDC
The electrical identity of 800B561JT100XT is a zero plus or minus 30 ppm per degree C coefficient over minus 55 to plus 125 degrees C, no derating of working voltage across that range, a quality factor greater than 2000 at 1 MHz, and 100 VDC working with a withstanding test at 250 V for five seconds, which is 250 percent of the rating. Insulation resistance is 10^5 Mohm at 25 degrees C and 10^4 Mohm at 125 degrees C, both at the rated voltage.
Two of those figures are easy to misread. Quality factor is quoted as greater than 2000 at 1 MHz for the whole case, not per value, and the insulation resistance is quoted at the rated working voltage, so a 100 V part is tested at 100 V rather than at the 500 V that suits a bench supply. Environmental testing follows MIL-STD-202, thermal shock to method 107 condition A, moisture resistance to method 106 and low voltage humidity to method 103 condition A at 85 degrees C and 85 percent for 240 hours under 1.5 VDC.
What 560 pF does from 30 MHz to 1 GHz
At 30 MHz the 560 pF body presents 9.47 ohm, at 150 MHz 1.89 ohm, at 500 MHz 0.57 ohm and at 1 GHz 0.28 ohm, and on a 50 ohm line the value reaches 50 ohm at about 5.7 MHz, inside the band. Those four numbers are what a matching or coupling position is built around, and they are the reason the capacitance code is quoted together with the voltage field: the same body behaves as a different element once the reactance leaves the window the stage can tune. The J window of 532 to 588 pF reads 1.80 ohm at the top and 1.99 ohm at the bottom against 1.89 ohm nominal at 150 MHz, so the band spreads the reactance by 0.19 ohm, which is 10.0 percent of the nominal and 5.0 percent of the value.
Quality factor for the 560 pF value is greater than 2000 at 1 MHz, and the sheet leaves series resistance and self resonance to the case B curves drawn against capacitance, so a single resonance figure quoted for this value by a broker is a claim rather than a printed limit. The circuit roles named for the family are high RF power filter networks, matching networks, couplers, combiners, output coupling, antenna coupling and DC blocking.
Temperature is the second half of the frequency picture. The coefficient is zero plus or minus 30 ppm per degree C, so a 560 pF part at 100 V moves by about 3.0240 pF over the full minus 55 to plus 125 degrees C range, and a tuned stage sees that as a shift of 0.010 ohm at 150 MHz on top of the tolerance already accepted.
Sourcing the 560 pF value and the second source
Packing for 800B561JT100XT is T for tape and reel at 1000 or 500 pieces, or the vertical form TV at the same counts, so the reel size is a line item decision and not part of the capacitance. On a 560 pF order at 100 V that count sets how many boards one reel covers. RF Component Sourcing, Component Lead Time Solutions, Kitting Service covers the sourcing side for a board that needs its other RF parts as well, and SUPERB supports radio frequency, medical, telecom, military and radar builds from component supply through assembly and test, with this series supplied through channel stock.
A 560 pF part at 100 V is a line item before it is a component, so the order carries the reel quantity, the date code and the incoming check together with the part number. Where the value has to be replaced, the second source is matched on capacitance, tolerance, voltage and case before a sample is released to the line, and the reel count is compared at the same time.
Reel and lot records travel with the 560 pF part at 100 V, because a capacitance value this small is hard to confirm on a bench meter that was not zeroed. The order records the packing code, the date code and the quantity on the reel, and the incoming check is written down against those fields so a later build can be traced back to the same lot.