Contact Us

800B361GT200X KYOCERA AVX RF Capacitor

Brand: ATC
The 800B361GT200X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

800B361GT200X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 800B361GT200X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number800B361GT200X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number800B361GT200X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 800B361GT200X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 800B361GT200X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

800B361GT200X: 360 pF at 200 V in the case B outline

Field by field, 800B361GT200X reads series 800B, case B, 361 is the capacitance code, two significant digits followed by the count of zeros, which lands on 360 pF, tolerance G giving plus or minus 2 percent, termination T, a voltage field of 200, laser marking X and tape and reel T. The tolerance here is a percentage window, so the band widens with the value, and on a 360 pF part that works out to 7.20 pF either side of the printed value, which is the number a buyer checks before accepting a substitute.

Series and case800B in case B, a 0.110 inch square outline, 2.79 mm by 2.79 mm
Capacitance360 pF, code 361
ToleranceG, plus or minus 2 percent, a window of 353 to 367 pF
Working voltage200 VDC
Dielectric withstanding500 V for five seconds, 250 percent of the working voltage
Life test400 V for 2000 hours at 125 degrees C, 200 percent of the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C, minus 55 to plus 125 C
Operating rangeminus 55 to plus 125 degrees C, no derating of working voltage
Quality factorgreater than 2000 at 1 MHz
Insulation resistance at 25 C10^5 Mohm minimum at the rated working voltage
Insulation resistance at 125 C10^4 Mohm minimum at the rated working voltage
Body thickness1.78 mm maximum, 0.070 inch, on every value in the case
Termination overlap0.38 mm plus or minus 0.25 mm, 0.015 inch plus or minus 0.010
Terminal strength5 lbs minimum and 15 lbs typical for five seconds, MIL-STD-202 method 211
Drift and retraceplus or minus 0.02 percent or 0.02 pF, whichever is greater
Aging and piezoelectric effectsnone stated for both on this sheet
Stored energy7.20 microjoule at 200 V, from one half C V squared
Stored charge72.0 nanocoulomb at 200 V
Reactance at 150 MHz2.95 ohm nominal
Reactance at 500 MHz0.88 ohm nominal

The series runs 0.1 pF to 1000 pF in a single case, and the two fields that move down that list are the capacitance and the working voltage. On this page they are 360 pF and 200 V, and the tolerance letter G fixes the window at plus or minus 2 percent on top of both.

Nothing in 800B361GT200X is optional: the case letter, the capacitance code, the tolerance letter and the voltage field all have to match the drawing, and only the packing letter at the end of the string is a free choice. On the 360 pF value that leaves plus or minus 2 percent as the acceptance window and 200 V as the rating the board has to survive.

Case B body and the mounting land for 360 pF

For the 360 pF part the case is 2.79 mm by 2.79 mm and 1.78 mm thick, and the overlap between termination and ceramic is 0.38 mm plus or minus 0.25 mm. The pull figure is 5 lbs minimum against 15 lbs typical for five seconds to method 211, and that pair, not the nominal size, is what decides how much force the placement and the depanel step may put on a 200 V body.

Printed pads for case B run from the tight vertical high density cell at A 1.78, B 0.76 and C 1.91 mm to the roomy horizontal normal cell at A 3.30, B 1.27 and C 1.91 mm. The 360 pF part at 200 V uses whichever row the assembly drawing names, and the 0.38 mm overlap is the space the solder fillet has to form in on all four sides.

Electrical limits at 200 VDC

For 800B361GT200X the limits are 200 VDC working, 500 V for five seconds on the withstanding test at 250 percent, and a 2000 hour life test at 125 degrees C at 400 V, so both test voltages move with the rating field rather than being fixed for the series. The rest of the block does not move: 30 ppm per degree C, quality factor above 2000 at 1 MHz, 10^5 Mohm at 25 degrees C falling to 10^4 Mohm at 125 degrees C, and aging and piezoelectric effects both stated as none.

Receiving inspection on a 360 pF part at 200 V usually starts with the drift figure, plus or minus 0.02 percent or 0.02 pF, whichever is greater, because it bounds the retrace a tuned stage will see after a thermal cycle. The rest of the qualification is MIL-STD-202 method 107 condition A for thermal shock, method 106 for moisture and method 103 condition A for low voltage humidity at 85 degrees C and 85 percent for 240 hours, with no aging and no piezoelectric effect stated on the sheet.

What 360 pF does from 30 MHz to 1 GHz

On the 360 pF code the reactance column reads 14.7 ohm at 30 MHz, 2.95 ohm at 150 MHz, 0.88 ohm at 500 MHz and 0.44 ohm at 1 GHz, and the value reaches 50 ohm at about 8.8 MHz, inside the band. A part from the body of the range is chosen for the shift it adds to a node rather than for its printed number, so the tolerance window is converted into ohms before the value is accepted. The G window of 353 to 367 pF reads 2.89 ohm at the top and 3.01 ohm at the bottom against 2.95 ohm nominal at 150 MHz, so the band spreads the reactance by 0.12 ohm, which is 4.0 percent of the nominal and 2.0 percent of the value.

The loss statement for the 360 pF part is a quality factor above 2000 at 1 MHz plus curves for series resistance and self resonance against capacitance, so nothing on this page depends on a single resonance number. The applications named for the series are avionics, public safety radio, telecom, WiMAX, broadcast transmitters and satellite systems, and at 200 V the 360 pF value holds 2.95 ohm at 150 MHz in whichever of those positions it fills.

A 360 pF part held to zero plus or minus 30 ppm per degree C drifts about 1.9440 pF from minus 55 to plus 125 degrees C, which is 0.016 ohm against the 2.95 ohm it presents at 150 MHz. On a 200 V stage that figure is small next to the tolerance window, and it is the reason the coefficient and the window are read together.

Sourcing the 360 pF value and the second source

For 800B361GT200X at 200 V the order needs the capacitance code, the tolerance letter, the voltage field and a packing quantity, and nothing else on the page moves the price of the reel. Component Lead Time Solutions, Pin to Pin Cross Reference, Kitting Service carries the sourcing side, and a replacement is checked on capacitance, tolerance, voltage and case, then on date code and lot records, before a first article is run. SUPERB works as a sourcing and assembly partner for RF, medical, telecom, military and radar programs, so the discussion starts from the bill of materials and the schedule.

For a 360 pF value rated at 200 V the order needs the capacitance code, the tolerance letter, the voltage field and a packing quantity, and nothing else on the page changes the price of the reel. Incoming inspection then reads the marking, measures the value against the G window and confirms the voltage field on the label.

For the 360 pF value at 200 V the sourcing conversation is short if the drawing is in hand: capacitance code, tolerance letter, voltage field and case, then the reel count. Everything after that is date code, packing and freight, and those are quoted rather than assumed.