Contact Us

800B2R7BT500XT KYOCERA AVX RF Capacitor 500 V

Brand: ATC
The 800B2R7BT500XT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

800B2R7BT500XT — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 800B2R7BT500XT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number800B2R7BT500XT
ManufacturerKYOCERA AVX
Voltage Rating500 V
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number800B2R7BT500XT
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 800B2R7BT500XT from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 800B2R7BT500XT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

800B2R7BT500XT: 2.7 pF at 500 V in the case B outline

Read 800B2R7BT500XT from the left and the order is already fixed. 800B names the series, case B puts the body at 0.110 inch square, 2R7 is the capacitance code, where the R holds the decimal place, so the printed value reads 2.7 pF, B sets the window at plus or minus 0.10 pF, T is the tin plated termination over a nickel barrier, 500 is the working voltage in volts DC, and the closing X and T stand for laser marking and tape and reel. Nothing on the number is a packing preference that can be changed later without a new order line.

Series and case800B in case B, a 0.110 inch square outline, 2.79 mm by 2.79 mm
Capacitance2.7 pF, code 2R7
ToleranceB, plus or minus 0.10 pF, a window of 2.60 to 2.80 pF
Working voltage500 VDC
Dielectric withstanding1250 V for five seconds, 250 percent of the working voltage
Life test1000 V for 2000 hours at 125 degrees C, 200 percent of the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C, minus 55 to plus 125 C
Operating rangeminus 55 to plus 125 degrees C, no derating of working voltage
Quality factorgreater than 2000 at 1 MHz
Insulation resistance at 25 C10^5 Mohm minimum at the rated working voltage
Insulation resistance at 125 C10^4 Mohm minimum at the rated working voltage
Body thickness1.78 mm maximum, 0.070 inch, on every value in the case
Termination overlap0.38 mm plus or minus 0.25 mm, 0.015 inch plus or minus 0.010
Terminal strength5 lbs minimum and 15 lbs typical for five seconds, MIL-STD-202 method 211
Drift and retraceplus or minus 0.02 percent or 0.02 pF, whichever is greater
Aging and piezoelectric effectsnone stated for both on this sheet
Stored energy338 nanojoule at 500 V, from one half C V squared
Stored charge1.35 nanocoulomb at 500 V
Reactance at 150 MHz393.0 ohm nominal
Reactance at 500 MHz117.9 ohm nominal

TDS-RFM-0022 prints one capacitance range for the series, 0.1 pF to 1000 pF, and one operating range for all of it, minus 55 to plus 125 degrees C with no derating of working voltage. What changes inside the range is the working voltage the value is offered at, and on 800B2R7BT500XT that field reads 500 V, with a 2.7 pF capacitance and a B tolerance window.

One field deserves a second look before the order is placed: B is a tolerance letter, not a grade, and on the 2.7 pF value it holds the part to plus or minus 0.10 pF, a band of 2.60 to 2.80 pF. Any letter that looks close on the order can widen this window by a factor of two or more, so the tolerance field is checked against the drawing rather than taken from the family name.

Case B body and the mounting land for 2.7 pF

The body is a 0.110 inch square, 2.79 mm by 2.79 mm, with a length tolerance of plus 0.51 and minus 0.25 mm on 2.79 mm and a width of 2.79 mm plus or minus 0.38 mm. Thickness is 1.78 mm at the maximum and the termination overlap is 0.38 mm plus or minus 0.25 mm, so the ceramic sits proud of the metal by a controlled amount rather than by whatever the plating run gave. A 2.7 pF part at 500 V takes the same case as every other value in the series.

Two mount rows are printed for case B and each has a normal and a high density column. Vertical mount gives A 2.29, B 1.27 and C 1.91 mm normal, and A 1.78, B 0.76 and C 1.91 mm high density. Horizontal mount gives A 3.30, B 1.27 and C 1.91 mm normal, and A 2.79, B 0.76 and C 1.91 mm high density. Both columns apply to every value, so the 2.7 pF part chooses a row, not a land.

Electrical limits at 500 VDC

The electrical identity of 800B2R7BT500XT is a zero plus or minus 30 ppm per degree C coefficient over minus 55 to plus 125 degrees C, no derating of working voltage across that range, a quality factor greater than 2000 at 1 MHz, and 500 VDC working with a withstanding test at 1250 V for five seconds, which is 250 percent of the rating. Insulation resistance is 10^5 Mohm at 25 degrees C and 10^4 Mohm at 125 degrees C, both at the rated voltage.

Two of those figures are easy to misread. Quality factor is quoted as greater than 2000 at 1 MHz for the whole case, not per value, and the insulation resistance is quoted at the rated working voltage, so a 500 V part is tested at 500 V rather than at the 500 V that suits a bench supply. Environmental testing follows MIL-STD-202, thermal shock to method 107 condition A, moisture resistance to method 106 and low voltage humidity to method 103 condition A at 85 degrees C and 85 percent for 240 hours under 1.5 VDC.

What 2.7 pF does from 30 MHz to 1 GHz

At 30 MHz the 2.7 pF body presents 1965 ohm, at 150 MHz 393.0 ohm, at 500 MHz 117.9 ohm and at 1 GHz 58.9 ohm, and on a 50 ohm line the value does not reach 50 ohm anywhere inside the band, because the crossing sits at about 1.18 GHz. Those four numbers are what a matching or coupling position is built around, and they are the reason the capacitance code is quoted together with the voltage field: the same body behaves as a different element once the reactance leaves the window the stage can tune. The B window of 2.60 to 2.80 pF reads 378.9 ohm at the top and 408.1 ohm at the bottom against 393.0 ohm nominal at 150 MHz, so the band spreads the reactance by 29.1 ohm, which is 7.4 percent of the nominal and 3.7 percent of the value.

Quality factor for the 2.7 pF value is greater than 2000 at 1 MHz, and the sheet leaves series resistance and self resonance to the case B curves drawn against capacitance, so a single resonance figure quoted for this value by a broker is a claim rather than a printed limit. The circuit roles named for the family are high RF power filter networks, matching networks, couplers, combiners, output coupling, antenna coupling and DC blocking.

Temperature is the second half of the frequency picture. The coefficient is zero plus or minus 30 ppm per degree C, so a 2.7 pF part at 500 V moves by about 0.0146 pF over the full minus 55 to plus 125 degrees C range, and a tuned stage sees that as a shift of 2.122 ohm at 150 MHz on top of the tolerance already accepted.

Sourcing the 2.7 pF value and the second source

Packing for 800B2R7BT500XT is T for tape and reel at 1000 or 500 pieces, or the vertical form TV at the same counts, so the reel size is a line item decision and not part of the capacitance. On a 2.7 pF order at 500 V that count sets how many boards one reel covers. RF Component Sourcing, Component Lead Time Solutions, Kitting Service covers the sourcing side for a board that needs its other RF parts as well, and SUPERB supports radio frequency, medical, telecom, military and radar builds from component supply through assembly and test, with this series supplied through channel stock.

A 2.7 pF part at 500 V is a line item before it is a component, so the order carries the reel quantity, the date code and the incoming check together with the part number. Where the value has to be replaced, the second source is matched on capacitance, tolerance, voltage and case before a sample is released to the line, and the reel count is compared at the same time.

Reel and lot records travel with the 2.7 pF part at 500 V, because a capacitance value this small is hard to confirm on a bench meter that was not zeroed. The order records the packing code, the date code and the quantity on the reel, and the incoming check is written down against those fields so a later build can be traced back to the same lot.