800B1R0CT500X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
800B1R0CT500X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 800B1R0CT500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 800B1R0CT500X |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 800B1R0CT500X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 800B1R0CT500X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 800B1R0CT500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
800B1R0CT500X: 1.0 pF at 500 V in the case B outline
The string 800B1R0CT500X carries six decisions: series 800B, case B at 2.79 mm square, 1R0 is the capacitance code, where the R holds the decimal place, so the printed value reads 1.0 pF, tolerance letter C at plus or minus 0.25 pF, termination T for tin over nickel barrier, the voltage field 500 for 500 VDC, then X for laser marking and T for tape and reel. The sheet prints 0.1 pF to 1000 pF for this case, so the capacitance code and the voltage field are what tell a 1.0 pF part at 500 V apart from the reel beside it.
| Series and case | 800B in case B, a 0.110 inch square outline, 2.79 mm by 2.79 mm |
| Capacitance | 1.0 pF, code 1R0 |
| Tolerance | C, plus or minus 0.25 pF, a window of 0.75 to 1.25 pF |
| Working voltage | 500 VDC |
| Dielectric withstanding | 1250 V for five seconds, 250 percent of the working voltage |
| Life test | 1000 V for 2000 hours at 125 degrees C, 200 percent of the working voltage |
| Temperature coefficient | zero plus or minus 30 ppm per degree C, minus 55 to plus 125 C |
| Operating range | minus 55 to plus 125 degrees C, no derating of working voltage |
| Quality factor | greater than 2000 at 1 MHz |
| Insulation resistance at 25 C | 10^5 Mohm minimum at the rated working voltage |
| Insulation resistance at 125 C | 10^4 Mohm minimum at the rated working voltage |
| Body thickness | 1.78 mm maximum, 0.070 inch, on every value in the case |
| Termination overlap | 0.38 mm plus or minus 0.25 mm, 0.015 inch plus or minus 0.010 |
| Terminal strength | 5 lbs minimum and 15 lbs typical for five seconds, MIL-STD-202 method 211 |
| Drift and retrace | plus or minus 0.02 percent or 0.02 pF, whichever is greater |
| Aging and piezoelectric effects | none stated for both on this sheet |
| Stored energy | 125 nanojoule at 500 V, from one half C V squared |
| Stored charge | 0.50 nanocoulomb at 500 V |
| Reactance at 150 MHz | 1061 ohm nominal |
| Reactance at 500 MHz | 318.3 ohm nominal |
Across the 0.1 pF to 1000 pF range the case does not change, the dielectric does not change and the temperature coefficient stays at zero plus or minus 30 ppm per degree C, but the voltage field does: values in this series are offered from 500 V down to 50 V. The 1.0 pF part carries 500 V and a C window, and those two fields are what the storekeeper reads on the reel label.
The packing letter sits at the end of 800B1R0CT500X and is chosen on the order rather than read off the body. For the 1.0 pF part at 500 V the three fields that matter at goods in are the capacitance code 1R0, the tolerance letter C and the voltage field 500, and all three are printed in the part number itself.
Case B body and the mounting land for 1.0 pF
Mechanically the 1.0 pF value is a 2.79 mm square body, 1.78 mm thick at the maximum, with 0.38 mm of termination overlap held to plus or minus 0.25 mm. Terminal strength is printed as 5 lbs minimum and 15 lbs typical for five seconds to MIL-STD-202 method 211, which is the number a fixture has to stay under when the board is clamped for test at 500 V.
The land table has four cells for this case: vertical normal A 2.29 B 1.27 C 1.91 mm, vertical high density A 1.78 B 0.76 C 1.91 mm, horizontal normal A 3.30 B 1.27 C 1.91 mm and horizontal high density A 2.79 B 0.76 C 1.91 mm. On the 1.0 pF body the choice is orientation first and density second, and the D dimension is what changes if the board has to be tightened.
Electrical limits at 500 VDC
On 800B1R0CT500X the voltage story is a 500 V rating, a withstanding test at 1250 V for five seconds at 250 percent, and a life test of 2000 hours at 125 degrees C at 1000 V, which is 200 percent of the rating. Around that the sheet fixes a 30 ppm per degree C coefficient, an operating range of minus 55 to plus 125 degrees C without derating, quality factor above 2000 at 1 MHz and drift of plus or minus 0.02 percent or 0.02 pF, whichever is greater.
The qualification block is MIL-STD-202 in three places, method 107 condition A for thermal shock, method 106 for moisture resistance, and method 103 condition A for low voltage humidity at 85 degrees C and 85 percent for 240 hours with 1.5 VDC applied. For the 1.0 pF part at 500 V the tests do not change with the value, only the working voltage does, and the sheet names no EIA-198, MIL-PRF-55681 or QPL listing for the series.
What 1.0 pF does from 30 MHz to 1 GHz
Read as reactance the 1.0 pF part is 5305 ohm at 30 MHz, 1061 ohm at 150 MHz, 318.3 ohm at 500 MHz and 159.2 ohm at 1 GHz, and against 50 ohm it does not reach 50 ohm anywhere inside the band, because the crossing sits at about 3.18 GHz. Below self resonance the part behaves as a capacitor and the figure falls with frequency, above it the same body turns inductive, so the resonance curve for case B decides where 1.0 pF stops being a capacitor at all. The C window of 0.75 to 1.25 pF reads 848.8 ohm at the top and 1415 ohm at the bottom against 1061 ohm nominal at 150 MHz, so the band spreads the reactance by 565.9 ohm, which is 53.3 percent of the nominal and 25.0 percent of the value.
At 1061 ohm on 150 MHz the 1.0 pF value is a series element in a coupling or matching role, and the sheet states quality factor as greater than 2000 at 1 MHz while leaving series resistance and resonance to the case B curves. That is why the value is bought with its tolerance rather than on its own: the C window is what the stage has to live with across the band.
Over the whole operating range of minus 55 to plus 125 degrees C the 30 ppm per degree C coefficient moves a 1.0 pF body by roughly 0.0054 pF, which at 150 MHz is 5.730 ohm on a 1061 ohm reactance. That drift is why the 500 V value is quoted with its tolerance and its coefficient together rather than as a single capacitance.
Sourcing the 1.0 pF value and the second source
A 1.0 pF part at 500 V arrives on tape and reel, 1000 or 500 pieces, or on the vertical form at the same counts, and the packing code is chosen on the order rather than fixed by the number. That matters where one reel has to cover a fixed run of boards. RF Component Sourcing, Obsolete RF Part Replacement, Incoming Inspection Plan holds the sourcing path, and a second source is matched on capacitance, tolerance, voltage and case before a sample is released, because a different case changes the land and a different tolerance changes the window.
At 500 V and 1.0 pF the buying question is not only price: the reel size, the date code and the storage grade set what the line can run. A replacement is checked on the four fields the order code exposes, capacitance, tolerance, voltage and case, and only then on the certificate.
On a 1.0 pF part at 500 V the practical sourcing risk is substitution, not availability: a part with the same capacitance and a wider window fits the pad and fails the stage. The four fields to compare are capacitance, tolerance, voltage and case, and the packing code then decides how many boards one reel covers.