800A9R1CT250X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
800A9R1CT250X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 800A9R1CT250X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX, part of the 800A series., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 800A9R1CT250X |
| Manufacturer | KYOCERA AVX |
| Series | 800A |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 800A9R1CT250X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the 800A product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 800A9R1CT250X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 800A9R1CT250X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
800A9R1CT250X: 9.1 pF at 250 V in the case A outline
Field by field, 800A9R1CT250X reads series 800A, case A, 9R1 is the capacitance code with the R holding the decimal place, so the printed value is 9.1 pF, tolerance C giving plus or minus 0.25 pF, termination T, a voltage field of 250 and laser marking X, with the packing position left open. On the 9.1 pF value the band runs from 8.85 pF to 9.35 pF, which is the number a buyer checks before accepting a replacement.
| Series and case | 800A in case A, a 0.055 inch square outline, 1.40 mm by 1.40 mm overall |
| Capacitance | 9.1 pF, code 9R1 |
| Tolerance | C, plus or minus 0.25 pF, a window of 8.85 to 9.35 pF |
| Working voltage | 250 VDC, 177 V RMS on a sine wave |
| Dielectric withstanding | 625 V for five seconds, 250 percent of the working voltage |
| Life test | 500 V for 2000 hours at 125 degrees C, 200 percent of the working voltage |
| Temperature coefficient | zero plus or minus 30 ppm per degree C, minus 55 to plus 125 C |
| Operating range | minus 55 to plus 125 degrees C, no derating of working voltage |
| Quality factor | greater than 2,000 at 1 MHz, the figure the sheet prints for the series |
| Insulation resistance at 25 C | 10^5 Mohm minimum at the rated voltage |
| Insulation resistance at 125 C | 10^4 Mohm minimum at the rated voltage |
| Outline | 0.055 plus 0.015 minus 0.010 inch, 1.40 plus 0.38 minus 0.25 mm, 1.45 mm thick at most |
| Termination overlap | 0.010 plus 0.010 minus 0.005 inch, 0.25 plus 0.25 minus 0.13 mm |
| Terminal strength | 5 lbs minimum and 10 lbs typical for five seconds, perpendicular pull |
| Drift and retrace | plus or minus 0.02 percent or 0.02 pF, whichever is greater |
| Aging and piezoelectric effects | none stated for both on this sheet |
| Stored energy | 284 nanojoule at 250 V, from one half C V squared |
| Stored charge | 2.27 nanocoulomb at 250 V |
| Reactance at 150 MHz | 116.6 ohm nominal |
| Packing | tape and reel 4000 or 500 pieces, vertical tape and reel on the same counts |
The series runs one case and one dielectric from 0.1 pF to 100 pF, and the field that moves down the table is the tolerance letter offered at each value. On 9.1 pF it lands at tolerance C, and the voltage field 250 fixes the rating, so a 9.1 pF part at another voltage is a different line on the same sheet rather than another family.
The tolerance letter deserves a second look before the order goes out: C is not a grade, and on 9.1 pF it pins the part to plus or minus 0.25 pF, a band of 8.85 to 9.35 pF. A letter that reads close on a quotation can widen that band five times over, so 9.1 pF is matched against the board drawing and not against the family name.
Case A body at 9.1 pF
For the 9.1 pF part at 250 V the body is 1.40 mm square and 1.45 mm thick at most, the overlap is 0.25 mm, and the pull figure is 5 lbs minimum against 10 lbs typical for five seconds. Those three numbers, rather than the nominal size, decide how much force placement and depaneling may put on a part this small.
The sheet prints suggested pads for vertical and for horizontal mounting, each in a normal and a high density row, and it prints them in inches only. On a 9.1 pF part at 250 V the assembly drawing names one of those four rows, and the stencil aperture follows the row rather than the capacitance.
Electrical limits at 250 VDC
For 800A9R1CT250X at 250 V the limits are a withstanding test at 625 V for five seconds and a life test at 500 V for 2000 hours at 125 degrees C, both fixed by the 250 and 200 percent rules. Insulation resistance is 10^5 Mohm minimum at 25 degrees C falling to 10^4 Mohm at 125 degrees C, both at the rated voltage.
Two of those figures are easy to misread. The withstanding test at 625 V lasts five seconds and is not a continuous rating, and the life test applies 200 percent of the working voltage at 125 degrees C, which is a schedule rather than a use case. The 9.1 pF part at 250 V carries both.
What 9.1 pF does from 30 MHz to 1 GHz
On the 9R1 code at 250 V the reactance column reads 583.0 ohm at 30 MHz, 116.6 ohm at 150 MHz, 35.0 ohm at 500 MHz and 17.5 ohm at 1 GHz, and the value reaches 50 ohm at about 350 MHz, inside the band. A body this small is bought for the shift it adds to a node rather than for its printed number.
Quality factor for the 9.1 pF value at 250 V is printed as greater than 2,000 at 1 MHz for the whole series. The sheet gives no ohmic ESR limit and no amperage for this case, only loss curves by value, so a 250 V stage is quoted from Q and from the supplier data rather than from a printed ohmic number.
Over minus 55 to plus 125 degrees C the 30 ppm per degree C coefficient moves a 9.1 pF body at 250 V by roughly 0.0491 pF, which at 150 MHz is 0.630 ohm against the 116.6 ohm it presents nominally. On values this small the 0.02 pF floor in the drift line is the figure that governs, not the ppm arithmetic.
One more figure settles the application: with a 50 ohm load in series the half power point of a 9.1 pF part sits at 350 MHz, where its reactance equals the load. A 250 V stage that has to work below that point needs a larger value, and one that works above it can use the 9.1 pF part as a coupling element, with 116.6 ohm at 150 MHz as the residual it leaves in the line.
Sourcing the 9.1 pF value and the second source
For 800A9R1CT250X at 250 V the order needs the capacitance code, the tolerance letter, the voltage field and a packing quantity, and nothing else on this page moves the price of a package. RF Component Sourcing, Obsolete RF Part Replacement, Incoming Inspection Plan carries the sourcing side, and SUPERB supports radio frequency, medical, telecom, military and radar builds from component supply through assembly and test, with this series supplied through channel stock.
A 9.1 pF part at 250 V is a line item before it is a component, so the order carries the package quantity, the date code and the incoming check together with the part number. Where the value has to be replaced, the second source is matched on capacitance, tolerance, voltage and case before a sample reaches the line.
On a 9.1 pF part at 250 V the practical sourcing risk is substitution, not availability: a part with the same capacitance and a wider window fits the pad and fails the stage. The four fields to compare are capacitance, tolerance, voltage and case, and the packing code then decides how many boards one package covers.