800A100GT250X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
800A100GT250X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 800A100GT250X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX, part of the 800A series., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 800A100GT250X |
| Manufacturer | KYOCERA AVX |
| Series | 800A |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 800A100GT250X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the 800A product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 800A100GT250X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 800A100GT250X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
800A100GT250X: 10.0 pF at 250 V in the case A outline
Read 800A100GT250X from the left and every field is fixed except the packing position. 800A is the series, A is case A at 0.055 inch square, 100 is the capacitance code, two significant digits and a count of zeros, which reads 10.0 pF, G holds the window at plus or minus 2 percent, T is the tin plated nickel barrier termination, 250 is the working voltage in volts DC and X is the laser marking. The last position, the packing code, is written on the order rather than inside the number, so the reel size is a purchasing line and not a part variant.
| Series and case | 800A in case A, a 0.055 inch square outline, 1.40 mm by 1.40 mm overall |
| Capacitance | 10.0 pF, code 100 |
| Tolerance | G, plus or minus 2 percent, a window of 9.80 to 10.2 pF |
| Working voltage | 250 VDC, 177 V RMS on a sine wave |
| Dielectric withstanding | 625 V for five seconds, 250 percent of the working voltage |
| Life test | 500 V for 2000 hours at 125 degrees C, 200 percent of the working voltage |
| Temperature coefficient | zero plus or minus 30 ppm per degree C, minus 55 to plus 125 C |
| Operating range | minus 55 to plus 125 degrees C, no derating of working voltage |
| Quality factor | greater than 2,000 at 1 MHz, the figure the sheet prints for the series |
| Insulation resistance at 25 C | 10^5 Mohm minimum at the rated voltage |
| Insulation resistance at 125 C | 10^4 Mohm minimum at the rated voltage |
| Outline | 0.055 plus 0.015 minus 0.010 inch, 1.40 plus 0.38 minus 0.25 mm, 1.45 mm thick at most |
| Termination overlap | 0.010 plus 0.010 minus 0.005 inch, 0.25 plus 0.25 minus 0.13 mm |
| Terminal strength | 5 lbs minimum and 10 lbs typical for five seconds, perpendicular pull |
| Drift and retrace | plus or minus 0.02 percent or 0.02 pF, whichever is greater |
| Aging and piezoelectric effects | none stated for both on this sheet |
| Stored energy | 312 nanojoule at 250 V, from one half C V squared |
| Stored charge | 2.50 nanocoulomb at 250 V |
| Reactance at 150 MHz | 106.1 ohm nominal |
| Packing | tape and reel 4000 or 500 pieces, vertical tape and reel on the same counts |
One capacitance range covers the series, 0.1 pF to 100 pF, and one operating range covers all of it, minus 55 to plus 125 degrees C with no derating of working voltage. What changes down the values table is the tolerance letter offered at each value, so the 10.0 pF part at 250 V is one line on that table rather than a general example.
Nothing in 800A100GT250X is free once the drawing exists: case letter, capacitance code, tolerance and voltage field all have to match, and only the packing position at the end is a choice. On the 10.0 pF part at 250 V the acceptance window is plus or minus 2 percent, written as 9.80 to 10.2 pF, and the rating the board has to survive is 250 V.
Case A body at 10.0 pF
The outline is 0.055 inch square, 1.40 mm with plus 0.38 and minus 0.25 mm, with 0.25 mm of termination overlap at each end and a body 1.45 mm thick at most. That is the smallest case in the 800 family, so a 10.0 pF part at 250 V changes what the placement nozzle carries and how much paste the pad takes, not only what the pad drawing says.
There are four pad rows for this case, vertical normal, vertical high density, horizontal normal and horizontal high density, and the choice between them is a placement decision rather than an electrical one. A 10.0 pF body at 250 V sits on whichever row the assembly drawing names, and the 0.25 mm overlap is where the fillet forms at both ends.
Electrical limits at 250 VDC
The electrical identity of 800A100GT250X is a zero plus or minus 30 ppm per degree C coefficient over minus 55 to plus 125 degrees C, no derating across that range, a quality factor printed as greater than 2,000 at 1 MHz for the series, and a withstanding test at 625 V for five seconds, which is 250 percent of the rating.
The environmental block is MIL-STD-202 in four places: method 107 condition A for thermal shock, method 106 for moisture resistance, method 103 condition A for low voltage humidity at 85 degrees C and 85 percent for 240 hours with 1.5 VDC applied, and method 108 for the 2000 hour life test. Method 208 covers solderability, and none of it changes with the value, so the 10.0 pF part at 250 V inherits the same schedule.
What 10.0 pF does from 30 MHz to 1 GHz
At 30 MHz the 10.0 pF body at 250 V presents 530.5 ohm, at 150 MHz 106.1 ohm, at 500 MHz 31.8 ohm and at 1 GHz 15.9 ohm, and on a 50 ohm line the value reaches 50 ohm at about 318 MHz, inside the band. Those four numbers are what a coupling, bypass or matching position is built around.
The loss statement for the 10.0 pF part at 250 V is a quality factor above 2,000 at 1 MHz, and the sheet stops there: no ESR ceiling and no current rating are printed for case A, so an amplifier stage at 250 V is checked on Q, on the mounting and on the cooling path instead of on a single amperage.
A 10.0 pF part at 250 V held to zero plus or minus 30 ppm per degree C drifts about 0.0540 pF from minus 55 to plus 125 degrees C, which is 0.573 ohm against the 106.1 ohm nominal at 150 MHz. The sheet also prints a floor of 0.02 pF or 0.02 percent, whichever is greater, and at this value the floor is the larger of the two.
Put the 10.0 pF body in series with a 50 ohm load and the pair behaves as a high pass with its half power point where the reactance equals the load, which for 10.0 pF is 318 MHz. Below that frequency the capacitor is the element that sets the loss, above it the same part is close to a short. On a 250 V stage that is the number to quote when the position has to pass a band and block a DC feed at the same time.
Sourcing the 10.0 pF value and the second source
Because 800A100GT250X ends at the marking field, packing is quoted with the order: T for tape and reel at 4000 or 500 pieces, TV for vertical tape and reel on the same counts, or a tray or box option that leaves the last position blank. On a 10.0 pF order at 250 V that count sets how many boards one package covers. RF Component Sourcing, Component Lead Time Solutions, Kitting Service covers the sourcing side for a board that needs its other RF parts as well.
At 250 V and 10.0 pF the buying question is not only price: package size, date code and storage grade set what the line can run. A replacement is checked on the four fields the order code exposes, capacitance, tolerance, voltage and case, and only then on the certificate.
For the 10.0 pF value at 250 V the sourcing conversation is short once the drawing is in hand: capacitance code, tolerance letter, voltage field and case, then the packing quantity. Everything after that is date code, packing and freight, and those are quoted rather than assumed.