Contact Us

700E511JW2500X KYOCERA AVX RF Capacitor

Brand: ATC
The 700E511JW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

700E511JW2500X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 700E511JW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number700E511JW2500X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number700E511JW2500X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 700E511JW2500X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 700E511JW2500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

700E511JW2500X: 510 pF at 2500 V in the case E outline

The string 700E511JW2500X is six decisions in a row: series 700E in case E, 511 is the capacitance code, first two digits significant and the third the count of zeros, which makes this a 510 pF part, tolerance letter J for plus or minus 5 percent, termination W for tin lead solder over a nickel barrier, the voltage field 2500 for 2500 VDC, then X for laser marking. Packing sits outside the number, as T for tape and reel at 250 pieces, J24 for a tray of 24 or J96 for a tray of 96, and none of those changes the part itself.

Series and case700E, case E, 0.380 inch square outline, 9.65 mm by 9.65 mm
Capacitance510 pF, code 511
ToleranceJ, plus or minus 5 percent, a window of 484 to 536 pF
Working voltage2500 VDC
Dielectric withstanding3000 V for five seconds, 120 percent of the working voltage
Life test2500 V for 2000 hours at 125 degrees C, 100 percent of the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C
Operating rangeminus 55 to plus 125 degrees C, no derating of working voltage
Quality factorgreater than 10,000 at 1 MHz
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C
Insulation test voltage500 VDC, the voltage the resistance figure is measured at
Leakage floorabout 5.0 microampere at the 500 VDC test, from the 10^5 Mohm floor
Stored energy1594 microjoule at 2500 V, from one half C V squared
Stored charge1275 nanocoulomb at 2500 V
Drift and retraceplus or minus 0.02 percent or 0.02 pF, whichever is greater
Reactance at 150 MHz2.08 ohm nominal
Reactance at 500 MHz0.62 ohm nominal
Reactance at 1 GHz0.31 ohm nominal
Body and termination9.65 mm square outline, 1.02 mm maximum overlap, 10 lbs minimum and 25 lbs typical pull
Mounting padA 10.29, B 1.27, C 8.26 and D 10.80 mm on the normal horizontal mount row

One number on this sheet moves with the capacitance rather than with the case. Quality factor is stated as greater than 10,000 at 1 MHz for 1 to 1000 pF and greater than 10,000 at 1 kHz for 1100 to 2200 pF, so a 510 pF part carries greater than 10,000 at 1 MHz, and its 2500 V rating is a separate field in the part number rather than a property of the value. Everything else on the page, the coefficient, the range and the drift window, is series wide.

NPO porcelain, a hermetic package, high Q, low series resistance and low series inductance are the statements on the first page, and the same page offers encapsulation for leaded styles. A 510 pF part at 2500 V is therefore checked at goods in on three fields, the marking, the measured value and the voltage field, and the measurement is taken at the frequency the class quotes quality factor at, better than 10,000 at 1 MHz.

Case E outline and the land pattern for 510 pF

The mechanical statement for the 510 pF part is a square: 9.65 mm by 9.65 mm, 1.02 mm of maximum termination overlap, and a pull of 10 lbs minimum against 25 lbs typical held for five seconds perpendicular to the termination. The suggested land on the normal horizontal row is A 10.29, B 1.27, C 8.26 and D 10.80 mm, and a high density column prints A 9.73, B 0.76, C 8.26 and D 9.78 mm for the same body, so the choice changes the footprint and the solder fillet rather than the component.

The pad table gives the same four land numbers for every value in the case, A 10.29, B 1.27, C 8.26 and D 10.80 mm on the normal row and A 9.73, B 0.76, C 8.26 and D 9.78 mm on the high density row. The 510 pF value does not change the land. One reading note on the same page: the thickness column carries a figure only for the leaded microstrip style, at 4.32 mm, and is blank for the W solder plate style this part uses.

Electrical limits at 2500 VDC

On the 510 pF code the stability figures are a 30 ppm per degree C coefficient, an operating range of minus 55 to plus 125 degrees C, and drift held to plus or minus 0.02 percent or 0.02 pF, whichever is larger, with retrace inside the same limit and no aging and no piezoelectric effect. The voltage side is a 2500 V rating, a withstanding test at 3000 V for five seconds at 120 percent, and a life test of 2000 hours at 125 degrees C at 2500 V, which is 100 percent of the rating. Quality factor is greater than 10,000 at 1 MHz.

Environmental testing follows MIL-STD-202 in three places: thermal shock to method 107 condition A, moisture resistance to method 106, and low voltage humidity to method 103 condition A at 85 degrees C and 85 percent for 240 hours under 1.5 VDC. Terminal strength is called out separately as method 211 with 10 lbs minimum and 25 lbs typical for five seconds perpendicular to the termination. For the 510 pF value at 2500 V the qualification does not change with the value, only the ratings do.

What 510 pF does from 30 MHz to 1 GHz

Taken as reactance the 510 pF part is 10.4 ohm at 30 MHz, 2.08 ohm at 150 MHz, 0.62 ohm at 500 MHz and 0.31 ohm at 1 GHz, and against 50 ohm it reaches 50 ohm at about 6.2 MHz, inside the band. Below self resonance the body behaves as a capacitor and the reactance falls as frequency rises, above it the same body turns inductive, so the resonance curve printed for case E decides where the 510 pF value stops being a capacitor. Tolerance reads better in ohms than in picofarads at this value. The J window of 484 to 536 pF lands at 1.98 ohm at the top and 2.19 ohm at the bottom against a 2.08 ohm nominal at 150 MHz, a spread of 0.21 ohm, which is 10.0 percent of the reactance and 5.0 percent of the printed value.

At 2.08 ohm on 150 MHz the 510 pF value is a series element in a coupling or matching role, and the sheet states quality factor as greater than 10,000 at 1 MHz while leaving series resistance and resonance to the case E curves. That is why the value is bought with its tolerance rather than on its own: bypass, coupling, tuning, impedance matching and DC blocking are the roles the family names, and in a 2500 V stage the 510 pF body sits where the reactance has to stay inside the window across the band.

Sourcing the 510 pF value and the second source

At 2500 V and 510 pF the buying question is not only price: the pack size, the date code and the storage grade set what the line can actually run. RF Component Sourcing, BOM Shortage Recovery, Incoming Inspection Plan carries the sourcing path, and a replacement is checked on the same four fields the order code exposes, capacitance, tolerance, voltage and case, before any board is built around it. SUPERB works as a sourcing and assembly partner for RF, medical, telecom, military and radar programs, so the discussion starts from the bill of materials and the schedule rather than from a catalogue line.

A 510 pF part at 2500 V arrives on a 250 piece reel when the packing letter is T, and the other choices on the sheet, a tray of 24 or a tray of 96, change the count rather than the component. That matters on a build where one reel has to cover a fixed number of boards, and it is the first thing checked when a substitute is offered, because a different pack size changes the kitting and the line side storage for the value.