700E391JW3600X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
700E391JW3600X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 700E391JW3600X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 700E391JW3600X |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 700E391JW3600X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 700E391JW3600X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 700E391JW3600X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
700E391JW3600X: 390 pF at 3600 V in the case E outline
The string 700E391JW3600X is six decisions in a row: series 700E in case E, 391 is the capacitance code, first two digits significant and the third the count of zeros, which makes this a 390 pF part, tolerance letter J for plus or minus 5 percent, termination W for tin lead solder over a nickel barrier, the voltage field 3600 for 3600 VDC, then X for laser marking. Packing sits outside the number, as T for tape and reel at 250 pieces, J24 for a tray of 24 or J96 for a tray of 96, and none of those changes the part itself.
| Series and case | 700E, case E, 0.380 inch square outline, 9.65 mm by 9.65 mm |
| Capacitance | 390 pF, code 391 |
| Tolerance | J, plus or minus 5 percent, a window of 370 to 410 pF |
| Working voltage | 3600 VDC |
| Dielectric withstanding | 4320 V for five seconds, 120 percent of the working voltage |
| Life test | 3600 V for 2000 hours at 125 degrees C, 100 percent of the working voltage |
| Temperature coefficient | zero plus or minus 30 ppm per degree C |
| Operating range | minus 55 to plus 125 degrees C, no derating of working voltage |
| Quality factor | greater than 10,000 at 1 MHz |
| Insulation resistance | 10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C |
| Insulation test voltage | 500 VDC, the voltage the resistance figure is measured at |
| Leakage floor | about 5.0 microampere at the 500 VDC test, from the 10^5 Mohm floor |
| Stored energy | 2527 microjoule at 3600 V, from one half C V squared |
| Stored charge | 1404 nanocoulomb at 3600 V |
| Drift and retrace | plus or minus 0.02 percent or 0.02 pF, whichever is greater |
| Reactance at 150 MHz | 2.72 ohm nominal |
| Reactance at 500 MHz | 0.82 ohm nominal |
| Reactance at 1 GHz | 0.41 ohm nominal |
| Body and termination | 9.65 mm square outline, 1.02 mm maximum overlap, 10 lbs minimum and 25 lbs typical pull |
| Mounting pad | A 10.29, B 1.27, C 8.26 and D 10.80 mm on the normal horizontal mount row |
One number on this sheet moves with the capacitance rather than with the case. Quality factor is stated as greater than 10,000 at 1 MHz for 1 to 1000 pF and greater than 10,000 at 1 kHz for 1100 to 2200 pF, so a 390 pF part carries greater than 10,000 at 1 MHz, and its 3600 V rating is a separate field in the part number rather than a property of the value. Everything else on the page, the coefficient, the range and the drift window, is series wide.
NPO porcelain, a hermetic package, high Q, low series resistance and low series inductance are the statements on the first page, and the same page offers encapsulation for leaded styles. A 390 pF part at 3600 V is therefore checked at goods in on three fields, the marking, the measured value and the voltage field, and the measurement is taken at the frequency the class quotes quality factor at, better than 10,000 at 1 MHz.
Case E outline and the land pattern for 390 pF
The mechanical statement for the 390 pF part is a square: 9.65 mm by 9.65 mm, 1.02 mm of maximum termination overlap, and a pull of 10 lbs minimum against 25 lbs typical held for five seconds perpendicular to the termination. The suggested land on the normal horizontal row is A 10.29, B 1.27, C 8.26 and D 10.80 mm, and a high density column prints A 9.73, B 0.76, C 8.26 and D 9.78 mm for the same body, so the choice changes the footprint and the solder fillet rather than the component.
The pad table gives the same four land numbers for every value in the case, A 10.29, B 1.27, C 8.26 and D 10.80 mm on the normal row and A 9.73, B 0.76, C 8.26 and D 9.78 mm on the high density row. The 390 pF value does not change the land. One reading note on the same page: the thickness column carries a figure only for the leaded microstrip style, at 4.32 mm, and is blank for the W solder plate style this part uses.
Electrical limits at 3600 VDC
On the 390 pF code the stability figures are a 30 ppm per degree C coefficient, an operating range of minus 55 to plus 125 degrees C, and drift held to plus or minus 0.02 percent or 0.02 pF, whichever is larger, with retrace inside the same limit and no aging and no piezoelectric effect. The voltage side is a 3600 V rating, a withstanding test at 4320 V for five seconds at 120 percent, and a life test of 2000 hours at 125 degrees C at 3600 V, which is 100 percent of the rating. Quality factor is greater than 10,000 at 1 MHz.
Environmental testing follows MIL-STD-202 in three places: thermal shock to method 107 condition A, moisture resistance to method 106, and low voltage humidity to method 103 condition A at 85 degrees C and 85 percent for 240 hours under 1.5 VDC. Terminal strength is called out separately as method 211 with 10 lbs minimum and 25 lbs typical for five seconds perpendicular to the termination. For the 390 pF value at 3600 V the qualification does not change with the value, only the ratings do.
What 390 pF does from 30 MHz to 1 GHz
Taken as reactance the 390 pF part is 13.6 ohm at 30 MHz, 2.72 ohm at 150 MHz, 0.82 ohm at 500 MHz and 0.41 ohm at 1 GHz, and against 50 ohm it reaches 50 ohm at about 8.2 MHz, inside the band. Below self resonance the body behaves as a capacitor and the reactance falls as frequency rises, above it the same body turns inductive, so the resonance curve printed for case E decides where the 390 pF value stops being a capacitor. Tolerance reads better in ohms than in picofarads at this value. The J window of 370 to 410 pF lands at 2.59 ohm at the top and 2.86 ohm at the bottom against a 2.72 ohm nominal at 150 MHz, a spread of 0.27 ohm, which is 10.0 percent of the reactance and 5.0 percent of the printed value.
At 2.72 ohm on 150 MHz the 390 pF value is a series element in a coupling or matching role, and the sheet states quality factor as greater than 10,000 at 1 MHz while leaving series resistance and resonance to the case E curves. That is why the value is bought with its tolerance rather than on its own: bypass, coupling, tuning, impedance matching and DC blocking are the roles the family names, and in a 3600 V stage the 390 pF body sits where the reactance has to stay inside the window across the band.
Sourcing the 390 pF value and the second source
At 3600 V and 390 pF the buying question is not only price: the pack size, the date code and the storage grade set what the line can actually run. RF Component Sourcing, BOM Shortage Recovery, Incoming Inspection Plan carries the sourcing path, and a replacement is checked on the same four fields the order code exposes, capacitance, tolerance, voltage and case, before any board is built around it. SUPERB works as a sourcing and assembly partner for RF, medical, telecom, military and radar programs, so the discussion starts from the bill of materials and the schedule rather than from a catalogue line.
A 390 pF part at 3600 V arrives on a 250 piece reel when the packing letter is T, and the other choices on the sheet, a tray of 24 or a tray of 96, change the count rather than the component. That matters on a build where one reel has to cover a fixed number of boards, and it is the first thing checked when a substitute is offered, because a different pack size changes the kitting and the line side storage for the value.