Contact Us

700E271JW3600X KYOCERA AVX RF Capacitor

Brand: ATC
The 700E271JW3600X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

700E271JW3600X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 700E271JW3600X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number700E271JW3600X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number700E271JW3600X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 700E271JW3600X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 700E271JW3600X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

700E271JW3600X: 270 pF at 3600 V in the case E outline

Field by field, 700E271JW3600X gives series 700E, case E at 9.65 mm square, 271 is the capacitance code, first two digits significant and the third the count of zeros, which makes this a 270 pF part, tolerance J at plus or minus 5 percent, termination W, a voltage field of 3600, and laser marking X. The same case E body carries the whole 1 pF to 2200 pF range of the series, so what separates a 270 pF part at 3600 V from its neighbours on the shelf is the capacitance code and the voltage field, not the outline.

Series and case700E, case E, 0.380 inch square outline, 9.65 mm by 9.65 mm
Capacitance270 pF, code 271
ToleranceJ, plus or minus 5 percent, a window of 256 to 284 pF
Working voltage3600 VDC
Dielectric withstanding4320 V for five seconds, 120 percent of the working voltage
Life test3600 V for 2000 hours at 125 degrees C, 100 percent of the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C
Operating rangeminus 55 to plus 125 degrees C, no derating of working voltage
Quality factorgreater than 10,000 at 1 MHz
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C
Insulation test voltage500 VDC, the voltage the resistance figure is measured at
Leakage floorabout 5.0 microampere at the 500 VDC test, from the 10^5 Mohm floor
Stored energy1750 microjoule at 3600 V, from one half C V squared
Stored charge972 nanocoulomb at 3600 V
Drift and retraceplus or minus 0.02 percent or 0.02 pF, whichever is greater
Reactance at 150 MHz3.93 ohm nominal
Reactance at 500 MHz1.18 ohm nominal
Reactance at 1 GHz0.59 ohm nominal
Body and termination9.65 mm square outline, 1.02 mm maximum overlap, 10 lbs minimum and 25 lbs typical pull
Mounting padA 10.29, B 1.27, C 8.26 and D 10.80 mm on the normal horizontal mount row

Before a reel is ordered the one break point worth reading is 1000 pF, the line where the quality factor changes the frequency it is quoted at. At 270 pF this part falls on the lower capacitance side of it, so quality factor is greater than 10,000 at 1 MHz, and the 3600 V working voltage is set by the voltage field of the order code rather than by the capacitance. The extended voltage column on the same table reaches 7200 VDC, which is a different order code from this one.

The construction statement is a hermetic porcelain multilayer body with high Q and low series resistance and inductance, and the applications named for it are bypass, coupling, tuning, impedance matching and DC blocking in HF and RF power amplifiers, transmitters, plasma chambers, antenna tuning and medical MRI coils. For the 270 pF value at 3600 V the incoming check that follows is a marking read, a value measurement and a voltage field read, taken at better than 10,000 at 1 MHz.

Case E outline and the land pattern for 270 pF

For the 270 pF value the body is the case E square, 9.65 mm on each side, with 1.02 mm of overlap available for the fillet and a terminal pull of 10 lbs minimum and 25 lbs typical for five seconds. The land is A 10.29, B 1.27, C 8.26 and D 10.80 mm on the normal row and A 9.73, B 0.76, C 8.26 and D 9.78 mm on the high density row, both taken from the case E table rather than scaled from a smaller case, because a part this size is placed with a nozzle set for a square body and a footprint that fits it.

For mounting, case E offers one orientation and two densities: the normal horizontal row at A 10.29, B 1.27, C 8.26 and D 10.80 mm and a high density variant at A 9.73, B 0.76, C 8.26 and D 9.78 mm, which trims the outer pads and narrows the inner one. The 270 pF body is the same 9.65 mm square in both, so the choice changes the footprint and the solder fillet rather than the part, and the 1.02 mm of termination overlap is what the fillet has to work with.

Electrical limits at 3600 VDC

The 270 pF part is specified at 3600 V, with a withstanding test at 4320 V for five seconds and a 2000 hour life test at 125 degrees C at 3600 V, so both voltage numbers follow the rating rather than sitting fixed across the series. Around them the sheet fixes a 30 ppm per degree C coefficient, a range of minus 55 to plus 125 degrees C with no derating, greater than 10,000 at 1 MHz, and capacitance drift of plus or minus 0.02 percent or 0.02 pF whichever is greater, with retrace inside the same window and both aging and piezoelectric effects stated as none.

One detail that trips a receiving inspection: insulation resistance is 10^5 Mohm at 25 degrees C and 10^4 Mohm at 125 degrees C, both at 500 VDC, so the 3600 V rating is not the voltage the resistance is measured at. The environmental block is MIL-STD-202 method 107 condition A for thermal shock, method 106 for moisture and method 103 condition A for low voltage humidity at 85 degrees C and 85 percent for 240 hours at 1.5 VDC, with terminal strength to method 211 at 10 lbs minimum and 25 lbs typical.

What 270 pF does from 30 MHz to 1 GHz

On the 270 pF code the reactance column reads 19.6 ohm at 30 MHz, 3.93 ohm at 150 MHz, 1.18 ohm at 500 MHz and 0.59 ohm at 1 GHz, and the 270 pF value reaches 50 ohm at about 11.8 MHz, inside the band. A part at this size is picked for the shift it adds to a node, so the tolerance window is converted into ohms before the value is accepted, and the conversion used here is the printed one rather than a rule of thumb. Tolerance reads better in ohms than in picofarads at this value. The J window of 256 to 284 pF lands at 3.74 ohm at the top and 4.14 ohm at the bottom against a 3.93 ohm nominal at 150 MHz, a spread of 0.39 ohm, which is 10.0 percent of the reactance and 5.0 percent of the printed value.

The loss statement for the 270 pF part is quality factor greater than 10,000 at 1 MHz plus curves for series resistance and self resonance against capacitance, so nothing in this block turns on a single resonance figure. Bypass, coupling, tuning, impedance matching and DC blocking are the roles the family is written for, in HF and RF power amplifiers, transmitters, plasma chambers, antenna tuning and medical MRI coils, and at 3600 V the 270 pF value holds 3.93 ohm at 150 MHz in whichever of those positions it fills.

Sourcing the 270 pF value and the second source

For a 270 pF value rated at 3600 V the order needs the capacitance code, the tolerance letter, the voltage field and a packing choice, and nothing else on the page changes the price of the reel. Component Lead Time Solutions, Pin to Pin Cross Reference, Kitting Service holds the sourcing side, and a second source is qualified on capacitance, tolerance, voltage and case size before a first article is run. SUPERB supports RF, medical, telecom, military and radar builds from component sourcing through assembly and test, and this series is supplied through channel stock.

Packing for this order is chosen at the order and not in the part number, from T at 250 pieces on tape and reel, to a tray of 24 or 96. For the 270 pF value at 3600 V the reel count is the number the planner needs, and a second source is compared on capacitance, tolerance, voltage and case before the pack size is even discussed.