Contact Us

600L4R7AT200T KYOCERA AVX RF Capacitor

Brand: ATC
The 600L4R7AT200T is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

600L4R7AT200T — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 600L4R7AT200T is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number600L4R7AT200T
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number600L4R7AT200T
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 600L4R7AT200T from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 600L4R7AT200T or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

600L4R7AT200T: 4.7 pF at 200 V in the 0402 body

The string 600L4R7AT200T is a set of decisions in order: series 600, case L for the 0402 outline, 4R7 is the capacitance code, where the R stands for the decimal point, so the printed value is 4.7 pF, tolerance letter A for plus or minus 0.05 pF, termination letter T for tin plating over a nickel barrier, the field 200 for 200 VDC, and the closing T for the 500 piece reel. Nothing sits between the voltage field and the packing letter, because the 0402 body of this series is not marked.

The outline is the EIA 0402 one: 1.02 mm by 0.51 mm, 0.60 mm maximum thickness, a 0.25 mm band and a terminal strength of 2 lbs typical against 1 lb minimum. Stored energy at 200 V on the 4.7 pF code is 94 nanojoule and stored charge is 0.94 nanocoulomb, and neither number changes the reason the body is chosen, which is the pad geometry on a dense board.

Stability is the reason to buy the 600L rather than a commodity chip: zero plus or minus 30 ppm per degree C over minus 55 to plus 125 degrees C, no aging and no piezoelectric effect, and a Q above 2,000 at 1 MHz. At 4.7 pF the 200 V rating is backed by a withstanding test at 500 V for five seconds and a life test at 400 V for 2000 hours at 125 degrees C, with a dissipation factor of 0.0010 maximum at 1 MHz.

Series and case600L, case L, EIA 0402, 1.02 mm by 0.51 mm
Capacitance4.7 pF, code 4R7
ToleranceA, plus or minus 0.05 pF, a window of 4.65 to 4.75 pF
Working voltage200 VDC, 141 V RMS at 0.707 times the DC rating
Dielectric withstanding500 V for five seconds, 250 percent of the working voltage
Life test400 V for 2000 hours at 125 degrees C, twice the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C
Operating rangeminus 55 to plus 125 degrees C
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, both at 200 VDC
Leakage floor2 nA at 200 V and 20 nA at 125 degrees C, computed from those two floors
Stored energy94 nanojoule at 200 V, from one half C V squared
Stored charge0.94 nanocoulomb at 200 V
Reactance at 150 MHz225.8 ohm nominal
Reactance at 500 MHz67.73 ohm nominal
Reactance at 1 GHz33.86 ohm nominal
Quality factorgreater than 2,000 at 1 MHz, dissipation factor 0.0010 maximum at 1 MHz
Aging and piezostated as none for both effects, so the value does not drift after mounting
Body0.60 mm maximum thickness, 0.25 mm plus or minus 0.15 mm band, terminal strength 2 lbs typical and 1 lb minimum
Mounting padA 0.70, B 0.90, C 0.40 and D 2.20 mm minimum on the published 0402 land pattern
Termination and packingT, tin plated over a nickel barrier and RoHS compliant; tape and reel at 500, 4,000 or 10,000 pieces; the 0402 body carries no laser marking field

What 4.7 pF does from 30 MHz to 1 GHz

Measured as reactance the 4.7 pF value is 1129 ohm at 30 MHz, 225.8 ohm at 150 MHz, 67.73 ohm at 500 MHz and 33.86 ohm at 1 GHz, and it reaches 50 ohm at about 677 MHz, inside the band. That is what makes the 4.7 pF body useful in a filter or a match at the top of the band, and it is also why the tolerance has to be read in ohms before a window is accepted.

At 150 MHz the 225.8 ohm nominal is what the circuit sees on the 4.7 pF part, and the A letter moves it between 228.2 ohm at the low end of the window and 223.4 ohm at the high end, 4.8 ohm of spread, or 2.1 percent of the reactance. That is the number to carry into a match, because 1.1 percent on a 4.7 pF value sounds small and does not stay small in ohms.

The loss story in this family is a curve, not a table cell: Q is stated as greater than 2,000 at 1 MHz, dissipation factor as 0.0010 maximum at that frequency, and series resonance against capacitance is plotted for the 0402 case. For the 4.7 pF code the 225.8 ohm at 150 MHz is a starting point and the resonance curve decides where the part stops behaving as a capacitor.

Where a 4.7 pF 0402 part is chosen

The trim pad on a resonator, the series element into a low noise stage, the matching leg of a narrow band amplifier and the DC block ahead of a detector are the places a 4.7 pF part of this series fills, because each of them needs a small reactance that holds its value. At 150 MHz the 4.7 pF position sees 225.8 ohm, so the A letter and the printed value are chosen as one decision.

The series is written for base stations, broadband wireless services, satellite links, subscriber devices, WiFi and public safety radio, and for a 4.7 pF part in A tolerance the circuit roles named are filter networks, matching networks, high Q frequency sources and tuning, coupling, bypass and DC blocking. On the 4.7 pF value that tolerance answers the stability question with a 30 ppm per degree C coefficient over minus 55 to plus 125 degrees C, which is the reason this family is bought for a source or a filter rather than for a bypass rail.

The 4.7 pF part sits in the smallest outline the series lists, case L at EIA 0402, with case S 0603 and case F 0805 above it in the series overview and the 0.1 to 27 pF range and 200 V rating printed once for case L on this sheet. Because nothing smaller exists for the 4.7 pF value, the pad geometry and the placement tolerance of the line decide the yield rather than a choice of case.

What a quality engineer asks about the 4.7 pF part is on the same page: 5 thermal shock cycles between minus 55 and plus 125 degrees C, moisture resistance to MIL-STD-202 method 106, solder coverage above 90 percent of the end termination, terminal strength of 2 lbs typical and 1 lb minimum, and a DSCC drawing number of 05003 for the military route.

Questions that arrive with a shortage quote for 4.7 pF

Can the A letter be swapped for another grade on a shortage? The ceramic and the case do not change, so the question is how much window the circuit absorbs. On the 4.7 pF value the A window is 4.65 to 4.75 pF, there is no tighter grade published for this value, and the next grade looser is B at plus or minus 0.1 pF. At 150 MHz those ends land at 228.2 ohm and 223.4 ohm against a 225.8 ohm nominal, a spread of 4.8 ohm, so a filter or a source keeps the letter while a coupling position can sometimes take a wider one. What goes on the quotation for a 4.7 pF part is the grade we can confirm, not the one the request assumed.

What has to be on the certificate for 600L4R7AT200T? Four fields that a broker line often leaves off: the date code and the lot, the measured capacitance with the test condition stated, the withstanding result against 500 V for five seconds, and the finish, because T is tin plated over a nickel barrier and a build that needs the non magnetic option has to ask for TN rather than assume it. A 4.7 pF part in A tolerance also has to carry the letter on the paperwork, since the value alone does not say which window arrived.

Does the finish change the part? It changes the plating and the paperwork and nothing else. T is tin over a nickel barrier and is the RoHS compliant standard, TN is the non magnetic barrier version, and W is the tin and lead solder finish. The 4.7 pF value and the 200 V rating stay the same across all three. Packing follows its own field: 500 pieces on tape and reel under T, 4,000 under T4K and 10,000 under T10K, and the 4.7 pF part carries no laser marking field either way.

What to send with an enquiry

Four fields decide the price and the date: quantity, target date, the full order code 600L4R7AT200T with the tolerance and termination letters, and the packing the line accepts. Give us the complete code 600L4R7AT200T and the revision is checked before anything is priced, with date codes, packing and country of origin confirmed on the quotation. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the Component Lead Time Solutions page covers the route when a value is on allocation, and the Kitting Service page sets out the packing, kitting and inspection options a production line asks for.