600L4R3AT200T KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
600L4R3AT200T — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 600L4R3AT200T is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 600L4R3AT200T |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 600L4R3AT200T |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 600L4R3AT200T from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 600L4R3AT200T or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
600L4R3AT200T: 4.3 pF at 200 V in the 0402 body
Break 600L4R3AT200T into fields and nothing is left to read from a headline. The series is 600, the case letter L gives the 0402 outline of 1.02 mm by 0.51 mm, and 4R3 is the capacitance code, where the R stands for the decimal point, so the printed value is 4.3 pF. The letter A sets the window at plus or minus 0.05 pF, the letter T is tin plating over a nickel barrier and the RoHS compliant option, the voltage field is 200 VDC, and the last T is the 500 piece reel.
For the 4.3 pF part the 0402 body is 1.02 mm long, 0.51 mm wide and 0.60 mm thick at the maximum, with a 0.25 mm band and a terminal strength of 2 lbs typical against 1 lb minimum. On that value at 200 V the figures are 86 nanojoule of stored energy and 0.86 nanocoulomb of stored charge, so the case is sized by the pad geometry and the placement force rather than by the energy it holds.
On the 4.3 pF code what separates this series from a general purpose chip is the stability statement: a temperature coefficient of zero plus or minus 30 ppm per degree C across minus 55 to plus 125 degrees C, no aging and no piezoelectric effect, with a Q above 2,000 at 1 MHz. For the 4.3 pF part the voltage rules are a 200 V rating, a withstanding test at 500 V for five seconds and a life test at 400 V for 2000 hours at 125 degrees C.
| Series and case | 600L, case L, EIA 0402, 1.02 mm by 0.51 mm |
| Capacitance | 4.3 pF, code 4R3 |
| Tolerance | A, plus or minus 0.05 pF, a window of 4.25 to 4.35 pF |
| Working voltage | 200 VDC, 141 V RMS at 0.707 times the DC rating |
| Dielectric withstanding | 500 V for five seconds, 250 percent of the working voltage |
| Life test | 400 V for 2000 hours at 125 degrees C, twice the working voltage |
| Temperature coefficient | zero plus or minus 30 ppm per degree C |
| Operating range | minus 55 to plus 125 degrees C |
| Insulation resistance | 10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, both at 200 VDC |
| Leakage floor | 2 nA at 200 V and 20 nA at 125 degrees C, computed from those two floors |
| Stored energy | 86 nanojoule at 200 V, from one half C V squared |
| Stored charge | 0.86 nanocoulomb at 200 V |
| Reactance at 150 MHz | 246.8 ohm nominal |
| Reactance at 500 MHz | 74.03 ohm nominal |
| Reactance at 1 GHz | 37.01 ohm nominal |
| Quality factor | greater than 2,000 at 1 MHz, dissipation factor 0.0010 maximum at 1 MHz |
| Aging and piezo | stated as none for both effects, so the value does not drift after mounting |
| Body | 0.60 mm maximum thickness, 0.25 mm plus or minus 0.15 mm band, terminal strength 2 lbs typical and 1 lb minimum |
| Mounting pad | A 0.70, B 0.90, C 0.40 and D 2.20 mm minimum on the published 0402 land pattern |
| Termination and packing | T, tin plated over a nickel barrier and RoHS compliant; tape and reel at 500, 4,000 or 10,000 pieces; the 0402 body carries no laser marking field |
What 4.3 pF does from 30 MHz to 1 GHz
On the 4.3 pF code the reactance is 1234 ohm at 30 MHz, 246.8 ohm at 150 MHz, 74.03 ohm at 500 MHz and 37.01 ohm at 1 GHz, and it reaches 50 ohm at about 740 MHz, inside the band. A 4.3 pF part that behaves this way is bought as a coupling or tuning element, and where it stops behaving as a capacitor is set by self resonance rather than by the printed value.
In ohms the A letter on a 4.3 pF part is a wider window than the picofarad number suggests: 4.25 to 4.35 pF covers 249.7 ohm at the bottom and 243.9 ohm at the top of the window at 150 MHz, a spread of 5.74 ohm around a 246.8 ohm nominal, so 2.3 percent of the reactance and 1.2 percent of the value.
This series states Q as greater than 2,000 at 1 MHz and leaves equivalent series resistance and self resonance to curves plotted against capacitance, so a single figure quoted for the 4.3 pF code by a broker line should be treated as a claim rather than as a specification. The reactance of 246.8 ohm at 150 MHz is derived from the value itself, while the resonance point has to be read from the curve for the 0402 case.
Where a 4.3 pF 0402 part is chosen
A 4.3 pF body in this series fills the places that need a small reactance to stay put: the trim pad that pulls a resonator onto frequency, the series element that sets the coupling into a low noise stage, the matching leg of a narrow band amplifier and the DC block ahead of a detector. At 150 MHz the position sees 246.8 ohm on the 4.3 pF value, which is the reason the A letter is picked together with the value.
Cellular base stations, broadband wireless services, satellite communications, subscriber based wireless devices, WiFi and public safety radio are the applications the data sheet lists for a 4.3 pF part in A tolerance, with filter networks, matching networks, high Q frequency sources and tuning, coupling, bypass and DC blocking as the circuit roles. For the 4.3 pF part that tolerance settles the temperature question with a 30 ppm per degree C coefficient, so the value moves by parts per million across the range rather than by percent.
For the 4.3 pF value the outline is already the smallest in the family: the series overview lists case L 0402, case S 0603 and case F 0805, and this sheet prints the 0.1 to 27 pF range with the 200 V rating for case L. That leaves no smaller body to fall back on for a 4.3 pF part, so the trade is between the 0402 pad and the placement tolerance the line can hold, not between case sizes.
On the qualification side the data sheet states, for the 4.3 pF part, 5 thermal shock cycles from minus 55 to plus 125 degrees C, moisture resistance to MIL-STD-202 method 106, solder coverage above 90 percent of the end termination, and a terminal strength of 2 lbs typical against 1 lb minimum. A DSCC drawing number, 05003, is listed for the military route as well on the 4.3 pF value.
Questions that arrive with a shortage quote for 4.3 pF
Can the A letter be swapped for another grade on a shortage? The ceramic and the case do not change, so the question is how much window the circuit absorbs. On the 4.3 pF value the A window is 4.25 to 4.35 pF, there is no tighter grade published for this value, and the next grade looser is B at plus or minus 0.1 pF. At 150 MHz those ends land at 249.7 ohm and 243.9 ohm against a 246.8 ohm nominal, a spread of 5.74 ohm, so a filter or a source keeps the letter while a coupling position can sometimes take a wider one. The quotation names the grade we can ship for the 4.3 pF value, so the line never receives a window it did not ask for.
What has to be on the certificate for 600L4R3AT200T? Four fields that a broker line often leaves off: the date code and the lot, the measured capacitance with the test condition stated, the withstanding result against 500 V for five seconds, and the finish, because T is tin plated over a nickel barrier and a build that needs the non magnetic option has to ask for TN rather than assume it. A 4.3 pF part in A tolerance also has to carry the letter on the paperwork, since the value alone does not say which window arrived.
Which finish letter should the order carry? Three are listed for the 600 series on the 4.3 pF line: T, tin plated over a nickel barrier and the RoHS compliant standard, TN, the same plating over a non magnetic barrier for builds that need it, and W, the tin and lead solder version. None of the three changes the 4.3 pF value or the 200 V rating, only the finish and the compliance statement. Packing for the 4.3 pF part is separate again: T at 500 pieces on tape and reel, T4K at 4,000 and T10K at 10,000, all on seven inch reels.
What to send with an enquiry
Four fields decide the price and the date: quantity, target date, the full order code 600L4R3AT200T with the tolerance and termination letters, and the packing the line accepts. With the full string for 600L4R3AT200T in hand we check the revision in force, then confirm date codes, packing and country of origin on the quotation itself. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the Incoming Inspection Plan page covers the route when a value is on allocation, and the Date Code Management page sets out the packing, kitting and inspection options a production line asks for.