600L240FT200T KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
600L240FT200T — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 600L240FT200T is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 600L240FT200T |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 600L240FT200T |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 600L240FT200T from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 600L240FT200T or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
600L240FT200T: 24 pF at 200 V in the 0402 body
The string 600L240FT200T is a set of decisions in order: series 600, case L for the 0402 outline, 240 is the capacitance code where the first two digits are the significant figures and the third is the number of zeros, which makes this a 24 pF part, tolerance letter F for plus or minus 1 percent, termination letter T for tin plating over a nickel barrier, the field 200 for 200 VDC, and the closing T for the 500 piece reel. Nothing sits between the voltage field and the packing letter, because the 0402 body of this series is not marked.
The outline is the EIA 0402 one: 1.02 mm by 0.51 mm, 0.60 mm maximum thickness, a 0.25 mm band and a terminal strength of 2 lbs typical against 1 lb minimum. Stored energy at 200 V on the 24 pF code is 480 nanojoule and stored charge is 4.8 nanocoulomb, and neither number changes the reason the body is chosen, which is the pad geometry on a dense board.
Stability is the reason to buy the 600L rather than a commodity chip: zero plus or minus 30 ppm per degree C over minus 55 to plus 125 degrees C, no aging and no piezoelectric effect, and a Q above 2,000 at 1 MHz. At 24 pF the 200 V rating is backed by a withstanding test at 500 V for five seconds and a life test at 400 V for 2000 hours at 125 degrees C, with a dissipation factor of 0.0005 maximum at 1 MHz.
| Series and case | 600L, case L, EIA 0402, 1.02 mm by 0.51 mm |
| Capacitance | 24 pF, code 240 |
| Tolerance | F, plus or minus 1 percent, a window of 23.8 to 24.2 pF |
| Working voltage | 200 VDC, 141 V RMS at 0.707 times the DC rating |
| Dielectric withstanding | 500 V for five seconds, 250 percent of the working voltage |
| Life test | 400 V for 2000 hours at 125 degrees C, twice the working voltage |
| Temperature coefficient | zero plus or minus 30 ppm per degree C |
| Operating range | minus 55 to plus 125 degrees C |
| Insulation resistance | 10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, both at 200 VDC |
| Leakage floor | 2 nA at 200 V and 20 nA at 125 degrees C, computed from those two floors |
| Stored energy | 480 nanojoule at 200 V, from one half C V squared |
| Stored charge | 4.8 nanocoulomb at 200 V |
| Reactance at 150 MHz | 44.21 ohm nominal |
| Reactance at 500 MHz | 13.26 ohm nominal |
| Reactance at 1 GHz | 6.63 ohm nominal |
| Quality factor | greater than 2,000 at 1 MHz, dissipation factor 0.0005 maximum at 1 MHz |
| Aging and piezo | stated as none for both effects, so the value does not drift after mounting |
| Body | 0.60 mm maximum thickness, 0.25 mm plus or minus 0.15 mm band, terminal strength 2 lbs typical and 1 lb minimum |
| Mounting pad | A 0.70, B 0.90, C 0.40 and D 2.20 mm minimum on the published 0402 land pattern |
| Termination and packing | T, tin plated over a nickel barrier and RoHS compliant; tape and reel at 500, 4,000 or 10,000 pieces; the 0402 body carries no laser marking field |
What 24 pF does from 30 MHz to 1 GHz
Measured as reactance the 24 pF value is 221.0 ohm at 30 MHz, 44.21 ohm at 150 MHz, 13.26 ohm at 500 MHz and 6.63 ohm at 1 GHz, and it reaches 50 ohm at about 133 MHz, inside the band. That is what makes the 24 pF body useful in a filter or a match at the top of the band, and it is also why the tolerance has to be read in ohms before a window is accepted.
At 150 MHz the 44.21 ohm nominal is what the circuit sees on the 24 pF part, and the F letter moves it between 44.66 ohm at the low end of the window and 43.77 ohm at the high end, 0.88 ohm of spread, or 2 percent of the reactance. That is the number to carry into a match, because 1 percent on a 24 pF value sounds small and does not stay small in ohms.
The loss story in this family is a curve, not a table cell: Q is stated as greater than 2,000 at 1 MHz, dissipation factor as 0.0005 maximum at that frequency, and series resonance against capacitance is plotted for the 0402 case. For the 24 pF code the 44.21 ohm at 150 MHz is a starting point and the resonance curve decides where the part stops behaving as a capacitor.
Where a 24 pF 0402 part is chosen
The trim pad on a resonator, the series element into a low noise stage, the matching leg of a narrow band amplifier and the DC block ahead of a detector are the places a 24 pF part of this series fills, because each of them needs a small reactance that holds its value. At 150 MHz the 24 pF position sees 44.21 ohm, so the F letter and the printed value are chosen as one decision.
The series is written for base stations, broadband wireless services, satellite links, subscriber devices, WiFi and public safety radio, and for a 24 pF part in F tolerance the circuit roles named are filter networks, matching networks, high Q frequency sources and tuning, coupling, bypass and DC blocking. On the 24 pF value that tolerance answers the stability question with a 30 ppm per degree C coefficient over minus 55 to plus 125 degrees C, which is the reason this family is bought for a source or a filter rather than for a bypass rail.
The 24 pF part sits in the smallest outline the series lists, case L at EIA 0402, with case S 0603 and case F 0805 above it in the series overview and the 0.1 to 27 pF range and 200 V rating printed once for case L on this sheet. Because nothing smaller exists for the 24 pF value, the pad geometry and the placement tolerance of the line decide the yield rather than a choice of case.
What a quality engineer asks about the 24 pF part is on the same page: 5 thermal shock cycles between minus 55 and plus 125 degrees C, moisture resistance to MIL-STD-202 method 106, solder coverage above 90 percent of the end termination, terminal strength of 2 lbs typical and 1 lb minimum, and a DSCC drawing number of 05003 for the military route.
Questions that arrive with a shortage quote for 24 pF
Can the F letter be swapped for another grade on a shortage? The ceramic and the case do not change, so the question is how much window the circuit absorbs. On the 24 pF value the F window is 23.8 to 24.2 pF, there is no tighter grade published for this value, and the next grade looser is G at plus or minus 2 percent. At 150 MHz those ends land at 44.66 ohm and 43.77 ohm against a 44.21 ohm nominal, a spread of 0.88 ohm, so a filter or a source keeps the letter while a coupling position can sometimes take a wider one. What goes on the quotation for a 24 pF part is the grade we can confirm, not the one the request assumed.
What has to be on the certificate for 600L240FT200T? Four fields that a broker line often leaves off: the date code and the lot, the measured capacitance with the test condition stated, the withstanding result against 500 V for five seconds, and the finish, because T is tin plated over a nickel barrier and a build that needs the non magnetic option has to ask for TN rather than assume it. A 24 pF part in F tolerance also has to carry the letter on the paperwork, since the value alone does not say which window arrived.
Does the finish change the part? It changes the plating and the paperwork and nothing else. T is tin over a nickel barrier and is the RoHS compliant standard, TN is the non magnetic barrier version, and W is the tin and lead solder finish. The 24 pF value and the 200 V rating stay the same across all three. Packing follows its own field: 500 pieces on tape and reel under T, 4,000 under T4K and 10,000 under T10K, and the 24 pF part carries no laser marking field either way.
What to send with an enquiry
Four fields decide the price and the date: quantity, target date, the full order code 600L240FT200T with the tolerance and termination letters, and the packing the line accepts. Give us the complete code 600L240FT200T and the revision is checked before anything is priced, with date codes, packing and country of origin confirmed on the quotation. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the Incoming Inspection Plan page covers the route when a value is on allocation, and the Date Code Management page sets out the packing, kitting and inspection options a production line asks for.