Contact Us

600L0R1AT200T KYOCERA AVX RF Capacitor 0.1 pF

Brand: ATC
The 600L0R1AT200T is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

600L0R1AT200T — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 600L0R1AT200T is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number600L0R1AT200T
ManufacturerKYOCERA AVX
Capacitance0.1 pF
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number600L0R1AT200T
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 600L0R1AT200T from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 600L0R1AT200T or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

600L0R1AT200T: 0.1 pF at 200 V in the 0402 body

Read 600L0R1AT200T from the left and every character was fixed before the order went out. 600 is the ultra low ESR ceramic series with a Q above 2,000 at 1 MHz, L is the case, an EIA 0402 outline of 1.02 mm by 0.51 mm with a 0.60 mm maximum thickness, and 0R1 is the capacitance code, where the R stands for the decimal point, so the printed value is 0.1 pF. A is the tolerance letter at plus or minus 0.05 pF, T is tin plated over a nickel barrier and is the lead free finish, 200 is the working voltage in volts DC, and the closing T is tape and reel at 500 pieces.

Case L on the 0.1 pF code measures 1.02 mm by 0.51 mm with a 0.60 mm maximum thickness and a 0.25 mm band, and the terminal strength is stated at 2 lbs typical and 1 lb minimum, so the part takes the placement force that a 0402 land pattern is drawn for. At 200 V that value stores 2 nanojoule and holds 0.02 nanocoulomb, both of which follow from the voltage field rather than from the case.

For the 0.1 pF value the electrical identity is a ceramic dielectric with a temperature coefficient of zero plus or minus 30 ppm per degree C over minus 55 to plus 125 degrees C, a Q above 2,000 at 1 MHz, no aging and no piezoelectric effect, and a working voltage of 200 V with a withstanding test at 500 V for five seconds. On the 0.1 pF code the resistance floors put leakage at 2 nA at 25 degrees C and 20 nA at 125 degrees C.

Series and case600L, case L, EIA 0402, 1.02 mm by 0.51 mm
Capacitance0.1 pF, code 0R1
ToleranceA, plus or minus 0.05 pF, a window of 0.05 to 0.15 pF
Working voltage200 VDC, 141 V RMS at 0.707 times the DC rating
Dielectric withstanding500 V for five seconds, 250 percent of the working voltage
Life test400 V for 2000 hours at 125 degrees C, twice the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C
Operating rangeminus 55 to plus 125 degrees C
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, both at 200 VDC
Leakage floor2 nA at 200 V and 20 nA at 125 degrees C, computed from those two floors
Stored energy2 nanojoule at 200 V, from one half C V squared
Stored charge0.02 nanocoulomb at 200 V
Reactance at 150 MHz10610 ohm nominal
Reactance at 500 MHz3183 ohm nominal
Reactance at 1 GHz1592 ohm nominal
Quality factorgreater than 2,000 at 1 MHz, dissipation factor 0.0010 maximum at 1 MHz
Aging and piezostated as none for both effects, so the value does not drift after mounting
Body0.60 mm maximum thickness, 0.25 mm plus or minus 0.15 mm band, terminal strength 2 lbs typical and 1 lb minimum
Mounting padA 0.70, B 0.90, C 0.40 and D 2.20 mm minimum on the published 0402 land pattern
Termination and packingT, tin plated over a nickel barrier and RoHS compliant; tape and reel at 500, 4,000 or 10,000 pieces; the 0402 body carries no laser marking field

What 0.1 pF does from 30 MHz to 1 GHz

At 30 MHz this 0.1 pF body presents 53052 ohm, at 150 MHz 10610 ohm, at 500 MHz 3183 ohm and at 1 GHz 1592 ohm. The 0.1 pF value does not reach 50 ohm inside the band at all, because the crossing sits at about 31.8 GHz, so across the whole band the part stays a small series reactance that a match is built around rather than a return path to ground, which is why the A window is quoted in ohms as well as in picofarads.

Tolerance on the 0.1 pF value is easier to judge in ohms than in picofarads. The A window of 0.05 to 0.15 pF lands at 7074 ohm at the top of the window and 21221 ohm at the bottom against a 10610 ohm nominal at 150 MHz, a spread of 14147 ohm, which is 133.3 percent of the nominal reactance and 50 percent of the nominal capacitance.

Quality factor is published as greater than 2,000 at 1 MHz for the series, with a dissipation factor of 0.0010 maximum at that frequency on the 0.1 pF code, and the equivalent series resistance and series resonance are drawn as curves against capacitance rather than printed as one number per value. Below self resonance the 0.1 pF body behaves as a capacitor and the reactance falls with frequency, above it the same part turns inductive and the reactance climbs again.

Where a 0.1 pF 0402 part is chosen

At 0.1 pF the part belongs where a small and stable reactance has to hold its value: the trim pad that pulls a resonator onto frequency, the series element that sets the coupling into a low noise stage, the matching leg of a narrow band amplifier and the DC block ahead of a detector. At 150 MHz that position sees 10610 ohm, so the value and the A letter are chosen together rather than separately.

For the 0.1 pF value in A tolerance the applications the series is written for are cellular base stations, broadband wireless services, satellite communications, subscriber based wireless devices, WiFi and public safety radio, with filter networks, matching networks, high Q frequency sources and tuning, coupling, bypass and DC blocking named as the circuit roles. All of them ask the same question of the 0.1 pF value at 200 V: how much it may move across minus 55 to plus 125 degrees C before the stage notices, and the answer here is 30 ppm per degree C rather than a percentage.

At 0.1 pF the size table of this sheet is worth reading: the series overview lists case L 0402, case S 0603 and case F 0805, while the electrical specification prints the 0.1 to 27 pF range and the 200 V working voltage for case L. Case L is the smallest of the three outlines, so at 0.1 pF there is no smaller body to trade down to and the pad is the 0402 one on every board.

Qualification facts for the 0.1 pF part decide whether a lot can go on a programme: thermal shock over 5 cycles from minus 55 to plus 125 degrees C, moisture resistance to MIL-STD-202 method 106, solder coverage above 90 percent of the end termination, and a terminal strength of 2 lbs typical against 1 lb minimum. The series also carries a DSCC drawing number, 05003, for the military route on the 0.1 pF value.

Questions that arrive with a shortage quote for 0.1 pF

Can the A letter be swapped for another grade on a shortage? The ceramic and the case do not change, so the question is how much window the circuit absorbs. On the 0.1 pF value the A window is 0.05 to 0.15 pF, there is no tighter grade published for this value, and the next grade looser is B at plus or minus 0.1 pF. At 150 MHz those ends land at 21221 ohm and 7074 ohm against a 10610 ohm nominal, a spread of 14147 ohm, so a filter or a source keeps the letter while a coupling position can sometimes take a wider one. We quote the grade we can actually ship on the 0.1 pF line rather than the one in the request.

What has to be on the certificate for 600L0R1AT200T? Four fields that a broker line often leaves off: the date code and the lot, the measured capacitance with the test condition stated, the withstanding result against 500 V for five seconds, and the finish, because T is tin plated over a nickel barrier and a build that needs the non magnetic option has to ask for TN rather than assume it. A 0.1 pF part in A tolerance also has to carry the letter on the paperwork, since the value alone does not say which window arrived.

Is T the only finish? No. On the 600 series the 0.1 pF part carries T, tin plated over a nickel barrier, which is the RoHS compliant standard, while TN is the same plating over a non magnetic barrier for builds that need it, and W is the tin and lead solder version. The letter changes the finish and the compliance statement, not the 0.1 pF value or the 200 V rating. Packing for the 0.1 pF reel is a field of its own as well: T is tape and reel at 500 pieces, T4K is 4,000 pieces and T10K is 10,000 pieces on a seven inch reel.

What to send with an enquiry

Four fields decide the price and the date: quantity, target date, the full order code 600L0R1AT200T with the tolerance and termination letters, and the packing the line accepts. Send the whole string for 600L0R1AT200T and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the Component Lead Time Solutions page covers the route when a value is on allocation, and the Kitting Service page sets out the packing, kitting and inspection options a production line asks for.