600F360GT250T KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
600F360GT250T — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 600F360GT250T is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 600F360GT250T |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 600F360GT250T |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 600F360GT250T from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 600F360GT250T or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
600F360GT250T: 36 pF at 250 V in the 0805 body
Read 600F360GT250T from the left and every character was fixed before the order went out. 600 is the ultra low ESR ceramic series with a Q above 2,000 at 1 MHz, F is the case, an EIA 0805 outline of 2.01 mm by 1.24 mm with a 1.30 mm maximum thickness, and 360 is the capacitance code where the first two digits are the significant figures and the third is the number of zeros, which makes this a 36 pF part. G is the tolerance letter at plus or minus 2 percent, T is tin plated over a nickel barrier and is the lead free finish, 250 is the working voltage in volts DC, and the closing T is tape and reel at 500 pieces. On 600F360GT250T no marking field sits between the voltage field and the closing packing letter, so the body arrives without a laser mark.
Case F on the 36 pF code measures 2.01 mm by 1.24 mm with a 1.30 mm maximum thickness and a 0.51 mm band, and the terminal strength is stated at 4 lbs typical and 2 lbs minimum, so the part takes the placement force that a 0805 land pattern is drawn for. At 250 V that value stores 1.1 microjoule and holds 9 nanocoulomb, both of which follow from the voltage field rather than from the case.
For the 36 pF value the electrical identity is a ceramic dielectric with a temperature coefficient of zero plus or minus 30 ppm per degree C over minus 55 to plus 125 degrees C, a Q above 2,000 at 1 MHz, no aging and no piezoelectric effect, and a working voltage of 250 V with a withstanding test at 625 V for five seconds. On the 36 pF code the resistance floors put leakage at 2.5 nA at 25 degrees C and 25 nA at 125 degrees C.
| Series and case | 600F, case F, EIA 0805, 2.01 mm by 1.24 mm |
| Capacitance | 36 pF, code 360 |
| Tolerance | G, plus or minus 2 percent, a window of 35.3 to 36.7 pF |
| Working voltage | 250 VDC, 177 V RMS at 0.707 times the DC rating |
| Dielectric withstanding | 625 V for five seconds, 250 percent of the working voltage |
| Life test | 500 V for 2000 hours at 125 degrees C, twice the working voltage |
| Temperature coefficient | zero plus or minus 30 ppm per degree C |
| Operating range | minus 55 to plus 125 degrees C |
| Insulation resistance | 10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, both at 250 VDC |
| Leakage floor | 2.5 nA at 250 V and 25 nA at 125 degrees C, computed from those two floors |
| Stored energy | 1.1 microjoule at 250 V, from one half C V squared |
| Stored charge | 9 nanocoulomb at 250 V |
| Reactance at 150 MHz | 29.47 ohm nominal |
| Reactance at 500 MHz | 8.84 ohm nominal |
| Reactance at 1 GHz | 4.42 ohm nominal |
| Quality factor | greater than 2,000 at 1 MHz, dissipation factor 0.0005 maximum at 1 MHz |
| Aging and piezo | stated as none for both effects, so the value does not drift after mounting |
| Body | 1.30 mm maximum thickness, 0.51 mm plus or minus 0.25 mm band |
| Mounting pad | A 1.50, B 1.30, C 0.60 and D 3.20 mm minimum on the published 0805 land pattern |
| Termination and packing | T, tin plated over a nickel barrier and RoHS compliant; tape and reel at 500 pieces or 4,000; laser marking not selected |
What 36 pF does from 30 MHz to 1 GHz
At 30 MHz this 36 pF body presents 147.37 ohm, at 150 MHz 29.47 ohm, at 500 MHz 8.84 ohm and at 1 GHz 4.42 ohm. Above 150 MHz the reactance of a 36 pF body is a few ohms against a 50 ohm line, so the part behaves close to a short and is bought as a coupling or DC blocking element, with self resonance setting the frequency where it stops behaving as a capacitor at all.
Tolerance on the 36 pF value is easier to judge in ohms than in picofarads. The G window of 35.3 to 36.7 pF lands at 28.9 ohm at the top of the window and 30.07 ohm at the bottom against a 29.47 ohm nominal at 150 MHz, a spread of 1.179 ohm, which is 4 percent of the nominal reactance and 2 percent of the nominal capacitance.
Quality factor is published as greater than 2,000 at 1 MHz for the series, with a dissipation factor of 0.0005 maximum at that frequency on the 36 pF code, and the equivalent series resistance and self resonance are drawn as curves against capacitance rather than printed as one number per value. Below self resonance the 36 pF body behaves as a capacitor and the reactance falls with frequency, above it the same part turns inductive and the reactance climbs again.
Where a 36 pF 0805 part is chosen
At 36 pF the part is bought for a coupling, DC blocking or bypass position where a low impedance is wanted rather than a precise reactance: the block between a driver and a load, the shunt leg that holds a node at radio frequency while passing DC, and the bypass on a bias feed. It presents 29.47 ohm at 150 MHz and 8.84 ohm at 500 MHz, so the value is picked against the lowest frequency of interest, not the top of the band.
The applications the series is written for are cellular base stations, broadband wireless services, satellite communications, subscriber based wireless devices, WiFi and public safety radio, with filter networks and high Q frequency sources named as the circuit roles for the 36 pF value. All of them ask the same question of a 36 pF part in G tolerance at 250 V: how much the value may move across minus 55 to plus 125 degrees C before the stage notices, and the answer here is 30 ppm per degree C rather than a percentage.
The sibling in the same series is the 0603 body, listed from 0.1 pF to 100 pF, so a 36 pF value fits both bodies and the two share the 250 V rating rather than splitting it. The choice at 36 pF is pad area and placement tolerance rather than voltage headroom.
Qualification facts for the 36 pF part decide whether a lot can go on a programme: thermal shock over 5 cycles from minus 55 to plus 125 degrees C, moisture resistance to MIL-STD-202 method 106, solder coverage above 90 percent of the end termination, and a terminal strength of 4 lbs typical against 2 lbs minimum. The series also carries a DSCC drawing number, 05001, for the military route on the 36 pF value.
Questions that arrive with a shortage quote
Can the G letter be swapped for another grade on a shortage? The ceramic and the case do not change, so the question is how much window the circuit absorbs. On the 36 pF value the G window is 35.3 to 36.7 pF, the next grade tighter is F at plus or minus 1 percent, and the next grade looser is J at plus or minus 5 percent. At 150 MHz those ends land at 30.07 ohm and 28.9 ohm against a 29.47 ohm nominal, a spread of 1.179 ohm, so a filter or a source keeps the letter while a blocking position can often take a wider one. We quote the grade we can actually ship on the 36 pF line rather than the one in the request.
What has to be on the certificate for 600F360GT250T? Four fields that a broker line often leaves off: the date code and the lot, the measured capacitance with the test condition stated, the withstanding result against 625 V for five seconds, and the finish, because T is tin plated over a nickel barrier and a build that needs the non magnetic option has to ask for TN rather than assume it. A 36 pF part in G tolerance also has to carry the letter on the paperwork, since the value alone does not say which window arrived.
Is T the only finish? No. On the 600 series the 36 pF part carries T, tin plated over a nickel barrier, which is the RoHS compliant standard, while TN is the same plating over a non magnetic barrier for builds that need it, and W is the tin and lead solder version. The letter changes the finish and the compliance statement, not the 36 pF value or the 250 V rating. Packing for the 36 pF reel is a field of its own as well: T is tape and reel at 500 pieces, T4K is 4,000 pieces on the larger reel and TV is the vertical reel at 500 pieces, with laser marking optional on this series.
What to send with an enquiry
Four fields decide the price and the date: quantity, target date, the full order code 600F360GT250T with the tolerance and termination letters, and the packing the line accepts. Send the whole string for 600F360GT250T and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the Incoming Inspection Plan page covers the route when a value is on allocation, and the Date Code Management page sets out the packing, kitting and inspection options a production line asks for.