Contact Us

600F201KT250XT KYOCERA AVX RF Capacitor 250 V

Brand: ATC
The 600F201KT250XT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

600F201KT250XT — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 600F201KT250XT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number600F201KT250XT
ManufacturerKYOCERA AVX
Voltage Rating250 V
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number600F201KT250XT
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 600F201KT250XT from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 600F201KT250XT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

600F201KT250XT: 200 pF at 250 V in the 0805 body

The string 600F201KT250XT is a set of decisions in order: series 600, case F for the 0805 outline, 201 is the capacitance code where the first two digits are the significant figures and the third is the number of zeros, which makes this a 200 pF part, tolerance letter K for plus or minus 10 percent, termination letter T for tin plating over a nickel barrier, the field 250 for 250 VDC, and the closing T for the 500 piece reel. Laser marking is optional on this series and its state in this string is read out in the next sentence. On 600F201KT250XT the X between the voltage field and the closing packing letter is the optional laser marking field and it is present, so the body arrives marked.

The outline is the EIA 0805 one: 2.01 mm by 1.24 mm, 1.30 mm maximum thickness, a 0.51 mm band and a terminal strength of 4 lbs typical against 2 lbs minimum. Stored energy at 250 V on the 200 pF code is 6.2 microjoule and stored charge is 50 nanocoulomb, and neither number changes the reason the body is chosen, which is the pad geometry on a dense board.

Stability is the reason to buy the 600F rather than a commodity chip: zero plus or minus 30 ppm per degree C over minus 55 to plus 125 degrees C, no aging and no piezoelectric effect, and a Q above 2,000 at 1 MHz. At 200 pF the 250 V rating is backed by a withstanding test at 625 V for five seconds and a life test at 500 V for 2000 hours at 125 degrees C, with a dissipation factor of 0.0005 maximum at 1 MHz.

Series and case600F, case F, EIA 0805, 2.01 mm by 1.24 mm
Capacitance200 pF, code 201
ToleranceK, plus or minus 10 percent, a window of 180 to 220 pF
Working voltage250 VDC, 177 V RMS at 0.707 times the DC rating
Dielectric withstanding625 V for five seconds, 250 percent of the working voltage
Life test500 V for 2000 hours at 125 degrees C, twice the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C
Operating rangeminus 55 to plus 125 degrees C
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, both at 250 VDC
Leakage floor2.5 nA at 250 V and 25 nA at 125 degrees C, computed from those two floors
Stored energy6.2 microjoule at 250 V, from one half C V squared
Stored charge50 nanocoulomb at 250 V
Reactance at 150 MHz5.31 ohm nominal
Reactance at 500 MHz1.59 ohm nominal
Reactance at 1 GHz0.8 ohm nominal
Quality factorgreater than 2,000 at 1 MHz, dissipation factor 0.0005 maximum at 1 MHz
Aging and piezostated as none for both effects, so the value does not drift after mounting
Body1.30 mm maximum thickness, 0.51 mm plus or minus 0.25 mm band
Mounting padA 1.50, B 1.30, C 0.60 and D 3.20 mm minimum on the published 0805 land pattern
Termination and packingT, tin plated over a nickel barrier and RoHS compliant; tape and reel at 500 pieces or 4,000; laser marking selected with the X field

What 200 pF does from 30 MHz to 1 GHz

Measured as reactance, the 200 pF value is 26.53 ohm at 30 MHz, 5.31 ohm at 150 MHz, 1.59 ohm at 500 MHz and 0.8 ohm at 1 GHz. From 150 MHz upward that is a low impedance against a 50 ohm line, which is the reason the position it fills is coupling, DC blocking or bypass, and the self resonance curve is what sets the top of its useful band.

At 150 MHz the 5.305 ohm nominal is what the circuit sees, and the K letter moves it between 5.895 ohm at the low end of the window and 4.823 ohm at the high end, 1.072 ohm of spread, or 20.2 percent of the reactance. That is the number to carry into a match, because 10 percent on a 200 pF value sounds small and does not always stay small in ohms.

The loss story in this family is a curve, not a table cell: Q is stated as greater than 2,000 at 1 MHz, dissipation factor as 0.0005 maximum at that frequency, and series resonance against capacitance is plotted for the 0805 case. For the 200 pF code the 5.31 ohm at 150 MHz is a starting point and the resonance curve decides where the part stops behaving as a capacitor.

Where a 200 pF 0805 part is chosen

At 200 pF the part is bought for a coupling, DC blocking or bypass position where a low impedance is wanted rather than a precise reactance: the block between a driver and a load, the shunt leg that holds a node at radio frequency while passing DC, and the bypass on a bias feed. It presents 5.31 ohm at 150 MHz and 1.59 ohm at 500 MHz, so the value is picked against the lowest frequency of interest, not the top of the band.

The series is written for base stations, broadband wireless services, satellite links, subscriber devices, WiFi and public safety radio, and the circuit roles named are filter networks and high Q frequency sources. A 200 pF part in K tolerance answers the stability question with a 30 ppm per degree C coefficient over minus 55 to plus 125 degrees C, which is the reason this family is bought for a source or a filter rather than for a bypass rail.

Above 100 pF the 0603 body of this series is no longer listed, so a 200 pF part is bought in the case F outline that measures 2.01 mm by 1.24 mm. The 0805 range itself runs up to 240 pF, so this value sits inside that range rather than at its top, and the pad has to be the published 0805 one whatever the board does around it.

What a quality engineer asks about the 200 pF part is on the same page: 5 thermal shock cycles between minus 55 and plus 125 degrees C, moisture resistance to MIL-STD-202 method 106, solder coverage above 90 percent of the end termination, terminal strength of 4 lbs typical and 2 lbs minimum, and a DSCC drawing number of 05001 for the military route.

Questions that arrive with a shortage quote

Can the K letter be swapped for another grade on a shortage? The ceramic and the case do not change, so the question is how much window the circuit absorbs. On the 200 pF value the K window is 180 to 220 pF, the next grade tighter is J at plus or minus 5 percent, and the next grade looser is M at plus or minus 20 percent. At 150 MHz those ends land at 5.895 ohm and 4.823 ohm against a 5.305 ohm nominal, a spread of 1.072 ohm, so a filter or a source keeps the letter while a blocking position can often take a wider one. What goes on the quotation for a 200 pF part is the grade we can confirm, not the one the request assumed.

What has to be on the certificate for 600F201KT250XT? Four fields that a broker line often leaves off: the date code and the lot, the measured capacitance with the test condition stated, the withstanding result against 625 V for five seconds, and the finish, because T is tin plated over a nickel barrier and a build that needs the non magnetic option has to ask for TN rather than assume it. A 200 pF part in K tolerance also has to carry the letter on the paperwork, since the value alone does not say which window arrived.

Does the finish change the part? It changes the plating and the paperwork and nothing else. T is tin over a nickel barrier and is the RoHS compliant standard, TN is the non magnetic barrier version, and W is the tin and lead solder finish. The 200 pF value and the 250 V rating stay the same across all three. Packing follows its own field: 500 pieces on tape and reel under T, 4,000 under T4K, 500 on a vertical reel under TV, and marking is optional on the 200 pF part.

What to send with an enquiry

Four fields decide the price and the date: quantity, target date, the full order code 600F201KT250XT with the tolerance and termination letters, and the packing the line accepts. Give us the complete code 600F201KT250XT and the revision is checked before anything is priced, with date codes, packing and country of origin confirmed on the quotation. The Component Lead Time Solutions page sets out how a radio frequency bill is sourced and what a second source has to prove, the Pin to Pin Cross Reference page covers the route when a value is on allocation, and the Kitting Service page sets out the packing, kitting and inspection options a production line asks for.