Contact Us

600F200JT250XT KYOCERA AVX RF Capacitor 250 V

Brand: ATC
The 600F200JT250XT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

600F200JT250XT — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 600F200JT250XT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number600F200JT250XT
ManufacturerKYOCERA AVX
Voltage Rating250 V
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number600F200JT250XT
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 600F200JT250XT from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 600F200JT250XT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

600F200JT250XT: 20 pF at 250 V in the 0805 body

Break 600F200JT250XT into fields and nothing is left to read from a headline. The series is 600, the case letter F gives the 0805 outline, and 200 is the capacitance code where the first two digits are the significant figures and the third is the number of zeros, which makes this a 20 pF part. The letter J sets the window at plus or minus 5 percent, the letter T is tin plating over a nickel barrier and the RoHS compliant option, the voltage field is 250 VDC, and the last T is the 500 piece reel. On 600F200JT250XT the X between the voltage field and the closing packing letter is the optional laser marking field and it is present, so the body arrives marked.

For the 20 pF part the 0805 body is 2.01 mm long, 1.24 mm wide and 1.30 mm thick at the maximum, with a 0.51 mm band and a terminal strength of 4 lbs typical against 2 lbs minimum. On that value at 250 V the figures are 0.6 microjoule of stored energy and 5 nanocoulomb of stored charge, so the case is sized by the pad geometry and the placement force rather than by the energy it holds.

On the 20 pF code what separates this series from a general purpose chip is the stability statement: a temperature coefficient of zero plus or minus 30 ppm per degree C across minus 55 to plus 125 degrees C, no aging and no piezoelectric effect, with a Q above 2,000 at 1 MHz. For the 20 pF part the voltage rules are a 250 V rating, a withstanding test at 625 V for five seconds and a life test at 500 V for 2000 hours at 125 degrees C.

Series and case600F, case F, EIA 0805, 2.01 mm by 1.24 mm
Capacitance20 pF, code 200
ToleranceJ, plus or minus 5 percent, a window of 19 to 21 pF
Working voltage250 VDC, 177 V RMS at 0.707 times the DC rating
Dielectric withstanding625 V for five seconds, 250 percent of the working voltage
Life test500 V for 2000 hours at 125 degrees C, twice the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C
Operating rangeminus 55 to plus 125 degrees C
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, both at 250 VDC
Leakage floor2.5 nA at 250 V and 25 nA at 125 degrees C, computed from those two floors
Stored energy0.6 microjoule at 250 V, from one half C V squared
Stored charge5 nanocoulomb at 250 V
Reactance at 150 MHz53.05 ohm nominal
Reactance at 500 MHz15.92 ohm nominal
Reactance at 1 GHz7.96 ohm nominal
Quality factorgreater than 2,000 at 1 MHz, dissipation factor 0.0005 maximum at 1 MHz
Aging and piezostated as none for both effects, so the value does not drift after mounting
Body1.30 mm maximum thickness, 0.51 mm plus or minus 0.25 mm band
Mounting padA 1.50, B 1.30, C 0.60 and D 3.20 mm minimum on the published 0805 land pattern
Termination and packingT, tin plated over a nickel barrier and RoHS compliant; tape and reel at 500 pieces or 4,000; laser marking selected with the X field

What 20 pF does from 30 MHz to 1 GHz

On the 20 pF code the impedance reads 265.26 ohm at 30 MHz, 53.05 ohm at 150 MHz, 15.92 ohm at 500 MHz and 7.96 ohm at 1 GHz. Between 150 MHz and 500 MHz it drops from 53.05 ohm to 15.92 ohm and passes through 50 ohm somewhere inside that span, so the 20 pF body is a series element low in the band and a shunt element high in it, and only the position in the circuit settles which.

In ohms the J letter is a wider window than the picofarad number suggests: 19 to 21 pF covers 55.84 ohm at the bottom and 50.53 ohm at the top of the window at 150 MHz, a spread of 5.318 ohm around a 53.05 ohm nominal, so 10 percent of the reactance and 5 percent of the value.

This series states Q as greater than 2,000 at 1 MHz and leaves equivalent series resistance and self resonance to curves plotted against capacitance, so a single figure quoted for the 20 pF code by a broker line should be treated as a claim rather than as a specification. The reactance of 53.05 ohm at 150 MHz is derived from the value itself, while the resonance point has to be read from the curve for this case size.

Where a 20 pF 0805 part is chosen

A 20 pF value of this series sits mid band rather than at either end, so it turns up as the series coupling element between a driver and a low noise stage, as the shunt leg of a match, as a DC block, or as the tuning pad on a filter. At 150 MHz it presents 53.05 ohm and at 1 GHz 7.96 ohm, and because the role changes with frequency the J window has to be checked at the frequency the stage actually runs at.

Cellular base stations, broadband wireless services, satellite communications, subscriber based wireless devices, WiFi and public safety radio are the applications the data sheet lists, with filter networks and high Q frequency sources as the circuit roles for the 20 pF value. For a 20 pF part in J tolerance the temperature question is settled by the 30 ppm per degree C coefficient, so the value moves by parts per million across the range rather than by percent.

The 0402, 0603 and 0805 bodies of this series are all listed at 250 V and the 0603 member stops at 100 pF, so the 20 pF value can be placed in either of the two larger bodies. At 20 pF both the 0603 and the 0805 can be placed, and the wider case is the one that gives the placement headroom a dense board usually asks for.

On the qualification side the data sheet states, for the 20 pF part, 5 thermal shock cycles from minus 55 to plus 125 degrees C, moisture resistance to MIL-STD-202 method 106, solder coverage above 90 percent of the end termination, and a terminal strength of 4 lbs typical against 2 lbs minimum. A DSCC drawing number, 05001, is listed for the military route as well on the 20 pF value.

Questions that arrive with a shortage quote

Can the J letter be swapped for another grade on a shortage? The ceramic and the case do not change, so the question is how much window the circuit absorbs. On the 20 pF value the J window is 19 to 21 pF, the next grade tighter is G at plus or minus 2 percent, and the next grade looser is K at plus or minus 10 percent. At 150 MHz those ends land at 55.84 ohm and 50.53 ohm against a 53.05 ohm nominal, a spread of 5.318 ohm, so a filter or a source keeps the letter while a blocking position can often take a wider one. The quotation names the grade we can ship for the 20 pF value, so the line never receives a window it did not ask for.

What has to be on the certificate for 600F200JT250XT? Four fields that a broker line often leaves off: the date code and the lot, the measured capacitance with the test condition stated, the withstanding result against 625 V for five seconds, and the finish, because T is tin plated over a nickel barrier and a build that needs the non magnetic option has to ask for TN rather than assume it. A 20 pF part in J tolerance also has to carry the letter on the paperwork, since the value alone does not say which window arrived.

Which finish letter should the order carry? Three are listed for the 600 series on the 20 pF line: T, tin plated over a nickel barrier and the RoHS compliant standard, TN, the same plating over a non magnetic barrier for builds that need it, and W, the tin and lead solder version. None of the three changes the 20 pF value or the 250 V rating, only the finish and the compliance statement. Packing for the 20 pF part is separate again: T at 500 pieces on tape and reel, T4K at 4,000 on the larger reel, TV as a vertical reel of 500, with laser marking optional.

What to send with an enquiry

Four fields decide the price and the date: quantity, target date, the full order code 600F200JT250XT with the tolerance and termination letters, and the packing the line accepts. With the full string for 600F200JT250XT in hand we check the revision in force, then confirm date codes, packing and country of origin on the quotation itself. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the Component Lead Time Solutions page covers the route when a value is on allocation, and the Kitting Service page sets out the packing, kitting and inspection options a production line asks for.