Contact Us

600F0R3CT250T KYOCERA AVX RF Capacitor 0.3 pF

Brand: ATC
The 600F0R3CT250T is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

600F0R3CT250T — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 600F0R3CT250T is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number600F0R3CT250T
ManufacturerKYOCERA AVX
Capacitance0.3 pF
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number600F0R3CT250T
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 600F0R3CT250T from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 600F0R3CT250T or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

600F0R3CT250T: 0.3 pF at 250 V in the 0805 body

Read 600F0R3CT250T from the left and every character was fixed before the order went out. 600 is the ultra low ESR ceramic series with a Q above 2,000 at 1 MHz, F is the case, an EIA 0805 outline of 2.01 mm by 1.24 mm with a 1.30 mm maximum thickness, 0R3 is the capacitance code where the R holds the decimal point so the marked value is 0.3 pF, C is the tolerance letter at plus or minus 0.25 pF, T is tin plated over a nickel barrier and is the lead free finish, 250 is the working voltage in volts DC, and the closing T is tape and reel at 500 pieces.

Case F measures 2.01 mm by 1.24 mm with a 1.30 mm maximum thickness and a 0.51 mm band, and the terminal strength is stated at 4 lbs typical and 2 lbs minimum, so the part takes the placement force that a 0805 land pattern is drawn for. At 250 V the 0.3 pF code stores 0.0 microjoule and holds 0.07 nanocoulomb, both of which follow from the voltage field rather than from the case.

The electrical identity is a ceramic dielectric with a temperature coefficient of zero plus or minus 30 ppm per degree C over minus 55 to plus 125 degrees C, a Q above 2,000 at 1 MHz, no aging effect and no piezoelectric effect, and a working voltage of 250 V with a withstanding test at 625 V for five seconds. Insulation resistance is 10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, which puts 2.5 nA of leakage at the rating and 25 nA at the hot end.

Series and case600F, case F, EIA 0805, 2.01 mm by 1.24 mm
Capacitance0.3 pF, code 0R3
ToleranceC, plus or minus 0.25 pF, a window of 0.0 to 0.6 pF
Working voltage250 VDC, 177 V RMS at 0.707 times the DC rating
Dielectric withstanding625 V for five seconds, 250 percent of the working voltage
Life test500 V for 2000 hours at 125 degrees C, twice the working voltage
Temperature coefficientzero plus or minus 30 ppm per degree C
Operating rangeminus 55 to plus 125 degrees C
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, both at 250 VDC
Leakage floor2.5 nA at 250 V and 25 nA at 125 degrees C, computed from those two floors
Stored energy0.0 microjoule at 250 V, from one half C V squared
Stored charge0.07 nanocoulomb at 250 V
Reactance at 150 MHz3536.78 ohm nominal
Reactance at 500 MHz1061.03 ohm nominal
Reactance at 1 GHz530.52 ohm nominal
Quality factorgreater than 2,000 at 1 MHz for the series
Aging and piezonone stated for either effect on the data sheet
Body1.30 mm maximum thickness, 0.51 mm plus or minus 0.25 mm band
Mounting padA 1.50, B 1.30, C 0.60 and D 3.20 mm on the published 0805 land pattern
Termination and packingT, tin plated over a nickel barrier and RoHS compliant; tape and reel at 500 pieces or 4,000

What 0.3 pF does from 30 MHz to 1 GHz

At 30 MHz this 0.3 pF body presents 17683.88 ohm, at 150 MHz 3536.78 ohm, at 500 MHz 1061.03 ohm and at 1 GHz 530.52 ohm. In the low picofarads the reactance stays large against a 50 ohm line across the whole band, so the part is chosen for a matching or coupling position where a small, stable reactance does the work rather than for a return path.

Tolerance on a value this small is easier to judge in ohms than in picofarads. The C window of 0.0 to 0.6 pF lands at 1929.15 ohm at the top of the window and 21220.66 ohm at the bottom against a 3536.78 ohm nominal at 150 MHz, a spread of 19291.51 ohm, which is 545.5 percent of the nominal reactance and 83.3 percent of the nominal capacitance.

Quality factor is published as greater than 2,000 at 1 MHz for the series and the equivalent series resistance and self resonance are drawn as curves against capacitance rather than printed as one number per value, which is the honest way to read this family. Below self resonance the body behaves as a capacitor and the reactance falls with frequency; above it the same part turns inductive and the reactance climbs again, so on a 0.3 pF code the useful window is bounded on both sides and a larger value is not automatically the better choice.

Where a 0.3 pF 0805 part is chosen

At 0.3 pF the part belongs in a filter network or a matching network where a small reactance has to be stable: the shunt leg of a two element match, the coupling element between a driver and a low noise stage, the trim pad that pulls a resonator onto frequency, and the DC block ahead of a detector. At 150 MHz that position sees 3536.78 ohm, which is why the value and the C letter are chosen together rather than separately.

The applications the series is written for are cellular base stations, broadband wireless services, satellite communications, subscriber based wireless devices, WiFi and public safety radio, with filter networks and high Q frequency sources named as the circuit roles. All of them ask the same question of a 0.3 pF part in C tolerance at 250 V: how much the value may move across minus 55 to plus 125 degrees C before the stage notices, and the answer here is 30 ppm per degree C rather than a percentage.

The sibling in the same series is the 0603 body, which is listed from 0.1 pF to 100 pF, so above 100 pF the 0805 case is the one the family offers and the two cases share the 250 V rating rather than splitting it. At 0.3 pF either body can be used, and the choice between them is pad area and placement tolerance rather than voltage headroom.

Qualification facts decide whether a lot can go on a programme: thermal shock over 5 cycles from minus 55 to plus 125 degrees C, moisture resistance to MIL-STD-202 method 106, solder coverage above 90 percent of the end termination, and a terminal strength of 4 lbs typical against 2 lbs minimum. The series also carries a DSCC drawing number, 05001, for the military route.

Questions that arrive with a shortage quote

Can the C letter be swapped for another grade on a shortage? The ceramic and the case do not change, so the question is how much window the circuit absorbs. On 0.3 pF the C window is 0.0 to 0.6 pF, the next grade tighter is B at plus or minus 0.1 pF, and the next grade looser is D at plus or minus 0.5 pF. At 150 MHz those ends land at 21220.66 ohm and 1929.15 ohm against a 3536.78 ohm nominal, a spread of 19291.51 ohm, so a filter or a source keeps the letter while a blocking position can often take a wider one. We quote the grade we can actually ship rather than the one in the request.

What has to be on the certificate for 600F0R3CT250T? Four fields that a broker line often leaves off: the date code and the lot, the measured capacitance with the test condition stated, the withstanding result against 625 V for five seconds, and the finish, because T is tin plated over a nickel barrier and a build that needs the non magnetic option has to ask for TN rather than assume it. A 0.3 pF part in C tolerance also has to carry the letter on the paperwork, since the value alone does not say which window arrived.

Is T the only finish? No. On the 600 series T is tin plated over a nickel barrier and is the RoHS compliant standard, TN is the same plating over a non magnetic barrier for builds that need it, and W is the tin and lead solder version. The letter changes the finish and the compliance statement, not the 0.3 pF value or the 250 V rating. Packing is a field of its own as well: T is tape and reel at 500 pieces, T4K is 4,000 pieces on the larger reel and TV is the vertical reel at 500 pieces, with laser marking optional on this series.

What to send with an enquiry

Four fields decide the price and the date: quantity, target date, the full order code 600F0R3CT250T with the tolerance and termination letters, and the packing the line accepts. Send the whole string and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the BOM Shortage Recovery page covers the route when a value is on allocation, and the Incoming Inspection Plan page sets out the packing, kitting and inspection options a production line asks for.