Contact Us

118FEC130M100TT KYOCERA AVX RF Capacitor

Brand: ATC
The 118FEC130M100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

118FEC130M100TT — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 118FEC130M100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number118FEC130M100TT
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number118FEC130M100TT
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 118FEC130M100TT from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 118FEC130M100TT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

118FEC130M100TT: 13.0 pF single layer capacitor at 100 V

Read 118FEC130M100TT from the left and every position is already fixed. The first three characters name the 118 Series, the next letter is the case, EC follows as the dielectric style, and the code 130 carries two significant digits and a count of zeros, so the value is 13.0 pF. The letter after that is the tolerance at plus or minus 20 percent, 100 is the voltage field and the closing TT is the termination. Nothing in that string is a preference, so the order is checked against the number rather than against the family name.

Series and outline118 Series, single sided recessed metalization, case F at 0.030 inch (0.762 mm)
DielectricEC, dielectric constant 650
Capacitance13.0 pF, code 130
ToleranceM, plus or minus 20 percent, a window of 10.4 to 15.6 pF
Rated voltage100 VDC, three digit voltage field
TerminationTT, titanium tungsten with nickel and gold, standard finish
Termination optionTX, titanium tungsten with gold, on request
Body thickness0.0045 to 0.012 inch (0.114 to 0.305 mm)
Recessed metalization0.012 inch (0.305 mm)
Border0.001 inch (0.0254 mm) minimum, one side only
Capacitance range0.05 pF to 1800 pF for the series
Operating frequencyprinted up to 100 GHz for the series
Case width and length0.030 inch (0.762 mm) square, area plus zero minus 0.003 inch
Capacitance code readingtwo significant digits, R marks the decimal point
Dielectric style fieldone or two characters, EC on this part
Voltage fieldthree significant digits, 100 V standard
Reactance at 1 GHz12.2 ohm nominal
Reactance at 2.45 GHz5.00 ohm nominal
Stored energy at 100 V65.0 nanojoule
Stored charge at 100 V1.30 nanocoulomb

The tolerance letter is the field that decides acceptance. M on 13.0 pF pins the part to plus or minus 20 percent, a window of 10.4 to 15.6 pF, and a letter read as close on a quotation can widen that band several times over. On a tuning position at 100 V that window, not the nominal value, is what the first article measures.

The last six characters of 118FEC130M100TT are as load bearing as the first three: the tolerance letter M, the 100 V field and the TT finish decide what the part is accepted at and how it is attached. On a 13.0 pF body that leaves nothing ambiguous for a second source to interpret, which is the point of a printed number.

Case F body, recessed metalization and TT termination

Case F is 0.030 inch (0.762 mm) square, and the body thickness of the 118 Series runs from 0.0045 to 0.012 inch (0.114 to 0.305 mm). On a 13.0 pF part at 100 V that outline is what the placement and the bond program work from, so a value change inside the same case letter keeps the footprint as it is.

Single sided recessed metalization on 118FEC130M100TT puts the termination area back by 0.012 inch (0.305 mm) and leaves a border of at least 0.001 inch on one side. On a 13.0 pF part at 100 V the gain is mechanical rather than electrical: a wider resist area between the pads and a visible border for inspection, which is the reason the series exists beside the plain single layer chips.

Termination TT on a 13.0 pF part carries titanium tungsten with nickel and gold, and the sheet prints TX as the second option. On a chip this small the finish is the difference between a joint that wets and one that has to be reworked, which is why the last two characters of 118FEC130M100TT are read before the order is released.

Dielectric EC at K 650 and the 100 V field

Dielectric EC carries a dielectric constant of 650 in the printed table, and the sheet prints its capacitance window cell by cell for every case from C to J. On case F the cell that holds 13.0 pF prints 12 to 22 pF, tolerance (KM), so the value on this page sits inside a band the catalogue itself states rather than inside a family average.

On this part the voltage field reads 100 V, the standard value printed for the 118 Series and carried as three significant digits. A 13.0 pF body at 100 V is what the number states; a different voltage is a different three characters and a separate line on the order.

Nothing here is quoted from a table that does not exist. The 118 page states range, outline, thickness, recess, border, tolerance and termination, so those are the fields this page carries. Coefficient, loss and resonance are printed elsewhere in the catalogue or as curves, and a 13.0 pF part at 100 V is judged on the fields the series actually specifies.

What 13.0 pF does from 30 MHz to 2.45 GHz

At 30 MHz the 13.0 pF body at 100 V presents 408.1 ohm, at 150 MHz 81.6 ohm, at 500 MHz 24.5 ohm, at 1 GHz 12.2 ohm and at 2.45 GHz 5.00 ohm, and against a 50 ohm line the value reaches 50 ohm at about 245 MHz, inside the band. The series is printed as usable up to 100 GHz, so the reactance keeps falling well above this table until resonance turns it back.

As a series element into 50 ohm the 13.0 pF value turns over at 245 MHz. That figure belongs to this body at 100 V in a 50 ohm system and moves with the surrounding impedance, so it is quoted with the load rather than on its own.

Read the application list as the intended use: matching and filtering, bypass and coupling, chip and wire construction, automated MIC construction and microwave integrated circuits. A 13.0 pF part at 100 V fits the first four of those at once, and the reactance column separates them by frequency.

Stored energy at the rating is 65.0 nanojoule on the 13.0 pF part, from one half C V squared, and the stored charge is 1.30 nanocoulomb at 100 V. On a signal line those two figures are small, which is why this value is bought for coupling and matching rather than for holding energy.

Sourcing the 13.0 pF value and the second source

On the stock side the value is ordered by number and pack quantity, and 13.0 pF at 100 V is a small line on a bill of materials. RF Component Sourcing, Component Lead Time Solutions, Kitting Service covers the sourcing side for a board that needs its other RF parts as well, and SUPERB supports radio frequency, medical, telecom, military and radar builds from component supply through assembly and test, with this series supplied through channel stock.

At 100 V and 13.0 pF the buying question is not only price: the case letter, the dielectric style and the date code decide what the line can accept. A replacement is compared on capacitance, tolerance, voltage, dielectric and case, in that order, because a different case changes the pad and a different dielectric changes the value grid.

For the 13.0 pF value at 100 V the sourcing conversation is short once the drawing is in hand: capacitance code, tolerance letter, dielectric style, case letter and termination, then the pack quantity. Everything after that is date code, packing and freight, and those are quoted rather than assumed.