118EDA2R7M100TT KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
118EDA2R7M100TT — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 118EDA2R7M100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 118EDA2R7M100TT |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 118EDA2R7M100TT |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 118EDA2R7M100TT from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 118EDA2R7M100TT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
118EDA2R7M100TT: 2.7 pF single layer capacitor at 100 V
118EDA2R7M100TT unpacks into five decisions: 118 Series, case E, dielectric DA, 2.7 pF, tolerance M at plus or minus 20 percent, and 100 V with TT termination. A buyer who changes one letter has a different part on the same drawing, which is why the marking on the pack is read against the number and not against the label on the bag.
| Series and outline | 118 Series, single sided recessed metalization, case E at 0.025 inch (0.635 mm) |
| Dielectric | DA, dielectric constant 165 |
| Capacitance | 2.7 pF, code 2R7 |
| Tolerance | M, plus or minus 20 percent, a window of 2.160 to 3.240 pF |
| Rated voltage | 100 VDC, three digit voltage field |
| Termination | TT, titanium tungsten with nickel and gold, standard finish |
| Termination option | TX, titanium tungsten with gold, on request |
| Body thickness | 0.0045 to 0.012 inch (0.114 to 0.305 mm) |
| Recessed metalization | 0.012 inch (0.305 mm) |
| Border | 0.001 inch (0.0254 mm) minimum, one side only |
| Capacitance range | 0.05 pF to 1800 pF for the series |
| Operating frequency | printed up to 100 GHz for the series |
| Case width and length | 0.025 inch (0.635 mm) square, area plus zero minus 0.003 inch |
| Capacitance code reading | two significant digits, R marks the decimal point |
| Dielectric style field | one or two characters, DA on this part |
| Voltage field | three significant digits, 100 V standard |
| Reactance at 1 GHz | 58.9 ohm nominal |
| Reactance at 2.45 GHz | 24.1 ohm nominal |
| Stored energy at 100 V | 13.5 nanojoule |
| Stored charge at 100 V | 0.27 nanocoulomb |
For a 2.7 pF part the accepted band runs from 2.160 to 3.240 pF, and the letter M is what writes it. Incoming inspection measures against that window at the rated 100 V, and a substitution with the same nominal and a looser letter is the failure mode this page exists to prevent.
Spelled out, 118EDA2R7M100TT is a 118 Series single layer capacitor, case E at 0.025 inch (0.635 mm), dielectric DA, 2.7 pF, tolerance M at plus or minus 20 percent, rated 100 V, finished TT. Five fields, one part, and a change in any one of them is a different item on the same page of the catalogue.
Case E body, recessed metalization and TT termination
The mechanical statement for 118EDA2R7M100TT is short: case E, 0.025 inch (0.635 mm) square, thickness between 0.0045 and 0.012 inch, and the length and width carry the same size. Nothing there moves when the capacitance or the voltage field moves, which is why a like for like replacement on an existing board is possible at all, and why the case letter is quoted first on a second source request.
This body is made with the metalization recessed by 0.012 inch (0.305 mm) and a border of 0.001 inch minimum, one side only. For a 2.7 pF part that recess is what keeps solder or epoxy from bridging the two terminations, and the exposed border is the feature automated visual equipment reads on the line.
TT is the standard finish on this series and reads titanium tungsten with nickel and gold. TX, titanium tungsten with gold, is the alternative printed beside it. Both are named inside the part number, so the finish is ordered rather than assumed, and a quotation that leaves the last two characters open is a quotation for an unfinished part.
Dielectric DA at K 165 and the 100 V field
The material is DA, constant 165, and the 118 page prints the value window per case and per dielectric. 2.7 pF on case E comes from that grid, which is the only place the series states what a given outline can hold, because the range of the whole series, 0.05 to 1800 pF, says nothing about one body.
Voltage is the fourth field from the right and it reads 100 here, the standard value for the series. Because the field is written in full, a 2.7 pF part at 100 V cannot be confused with the same value at a lower rating on a purchase order, and incoming inspection has one number to confirm on the label.
What the page does not print matters too. There is no temperature coefficient table, no dissipation factor, no ESR and no Q figure on the 118 page, so this block quotes none of them. The figure a tuned stage needs from that list is taken from the catalogue page that prints it for the dielectric, not from a family average.
What 2.7 pF does from 30 MHz to 2.45 GHz
Read as reactance the 2.7 pF part at 100 V is 1965 ohm at 30 MHz, 393.0 ohm at 150 MHz, 117.9 ohm at 500 MHz, 58.9 ohm at 1 GHz and 24.1 ohm at 2.45 GHz, so into 50 ohm it reaches 50 ohm at about 1.18 GHz, inside the band. Those figures are arithmetic at the nominal value and move in proportion with the tolerance letter, which is why the window and the reactance are quoted together.
One figure settles the application: into 50 ohm the 2.7 pF part reaches its half power point at 1.18 GHz. A 100 V stage that has to work below that point needs a larger value, and one that works above it can use this body as a coupling element with 393.0 ohm left in the line at 150 MHz.
The printed applications point the same way: microwave integrated circuits, automated MIC construction, chip and wire construction, matching and filtering circuits, bypass and coupling. A 2.7 pF body is used where one value has to sit on a thin film line next to an amplifier or a filter, not where bulk decoupling is wanted.
At 100 V the 2.7 pF body holds 13.5 nanojoule and 0.27 nanocoulomb. Both are small, and both are what a discharge path has to absorb if the part ever sits across a supply instead of in a signal line.
Sourcing the 2.7 pF value and the second source
A 2.7 pF order at 100 V is small in pieces, so the practical question is the packing quantity and the date code rather than the price break. RF Component Sourcing, BOM Shortage Recovery, Incoming Inspection Plan holds the sourcing path, and a second source is matched on capacitance, tolerance, voltage, dielectric and case before a sample is released.
For a 2.7 pF value rated at 100 V the order needs five fields and one pack quantity, and nothing else on this page moves the price of a small order. Incoming inspection reads the marking, measures against the plus or minus 20 percent window from 2.160 to 3.240 pF, and confirms the voltage field on the label.
Package and lot records travel with the 2.7 pF part at 100 V, because a body this small is hard to confirm on a meter that was not zeroed. The order records the pack quantity, the date code and the marking, and the incoming check is written against those fields so a later build traces back to the same lot.