118DEA5R1M100TT KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
118DEA5R1M100TT — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 118DEA5R1M100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 118DEA5R1M100TT |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 118DEA5R1M100TT |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 118DEA5R1M100TT from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 118DEA5R1M100TT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
118DEA5R1M100TT: 5.1 pF single layer capacitor at 100 V
Five fields sit inside 118DEA5R1M100TT and each one changes what arrives. Case D sets the outline at 0.020 inch (0.508 mm), dielectric EA sets the material, the value is 5.1 pF, tolerance M gives plus or minus 20 percent, and the 100 V field with TT termination closes the string. The whole part is described before any paperwork is opened.
| Series and outline | 118 Series, single sided recessed metalization, case D at 0.020 inch (0.508 mm) |
| Dielectric | EA, dielectric constant 650 |
| Capacitance | 5.1 pF, code 5R1 |
| Tolerance | M, plus or minus 20 percent, a window of 4.080 to 6.120 pF |
| Rated voltage | 100 VDC, three digit voltage field |
| Termination | TT, titanium tungsten with nickel and gold, standard finish |
| Termination option | TX, titanium tungsten with gold, on request |
| Body thickness | 0.0045 to 0.012 inch (0.114 to 0.305 mm) |
| Recessed metalization | 0.012 inch (0.305 mm) |
| Border | 0.001 inch (0.0254 mm) minimum, one side only |
| Capacitance range | 0.05 pF to 1800 pF for the series |
| Operating frequency | printed up to 100 GHz for the series |
| Case width and length | 0.020 inch (0.508 mm) square, area plus zero minus 0.003 inch |
| Capacitance code reading | two significant digits, R marks the decimal point |
| Dielectric style field | one or two characters, EA on this part |
| Voltage field | three significant digits, 100 V standard |
| Reactance at 1 GHz | 31.2 ohm nominal |
| Reactance at 2.45 GHz | 12.7 ohm nominal |
| Stored energy at 100 V | 25.5 nanojoule |
| Stored charge at 100 V | 0.51 nanocoulomb |
Because the value is small, the letter matters more than the number: 5.1 pF with tolerance M accepts 4.080 to 6.120 pF and nothing outside it. A part ordered at 100 V with a different letter is the same body, the same pad and a different circuit.
Look at 118DEA5R1M100TT as a sequence of gates rather than a name. 118 opens the single sided recessed metalization family, case D fixes the outline at 0.020 inch (0.508 mm), dielectric EA fixes the material, 5.1 pF carries the value, and the trailing fields close it at plus or minus 20 percent tolerance, 100 V and TT termination. Every gate can be checked against the drawing, which is why the number is quoted in full on a purchase order.
Case D body, recessed metalization and TT termination
At 5.1 pF and 100 V the body is a D outline, 0.020 inch (0.508 mm) square, between 0.0045 and 0.012 inch thick, with the area held to plus zero minus 0.003 inch. That is a single layer chip with a recessed termination area on one side, placed like any small chip and bonded where the assembly calls for a wire.
The recess is the point of this series. Metalization is set back 0.012 inch (0.305 mm) on case D and 0.012 inch on the larger cases, with a border of 0.001 inch minimum on one side, so the exposed border can be seen by automated visual equipment and the solder resist area between the terminations is wider. That is what lowers the chance of a short across the part during epoxy or solder attachment.
The finish on this part is declared inside the number. TT means titanium tungsten, nickel and gold, the standard for the 118 Series, with TX as the gold only option printed on the same page. The choice changes the surface a solder joint or a wire bond lands on, so it is quoted with the number and not after it.
Dielectric EA at K 650 and the 100 V field
Read the material first: EA, constant 650, and a value grid printed for each case. The 5.1 pF part on case D is one cell of that grid, and the tolerance letter M is what narrows the cell to the 4.080 to 6.120 pF band a receiver will measure.
The voltage field is 100, which the catalogue prints as its standard value for the series, written as three significant digits in the part number. Nothing about the outline changes with the field, so a 5.1 pF part at 100 V and the same part at another rating share a drawing and not a specification.
This series is specified on outline, value grid and termination, not on a loss number. The 118 page prints no ESR, no Q and no dissipation factor, so a loss budget is taken from the curve page for the dielectric rather than from a single ceiling. What can be computed for a 5.1 pF part at 100 V is the reactance column below and the energy at the rating.
What 5.1 pF does from 30 MHz to 2.45 GHz
On a 5.1 pF value at 100 V the reactance column reads 1040 ohm at 30 MHz, 208.0 ohm at 150 MHz, 62.4 ohm at 500 MHz, 31.2 ohm at 1 GHz and 12.7 ohm at 2.45 GHz, and against a 50 ohm line it reaches 50 ohm at about 624 MHz, inside the band. A single layer part this small is bought for the shift it adds to a node, so the column above is the first thing to read after the value.
Into a 50 ohm load the half power point of a 5.1 pF part sits at 624 MHz, where reactance equals load. Below that point the capacitor sets the loss in the line and above it the same body is close to a short, which on a 100 V stage is the number to quote when one position has to pass a band and block a DC feed.
Where this value is used is printed on the page: matching and filtering circuits, bypass and coupling, chip and wire construction, and microwave integrated circuits built with automated MIC equipment. At 100 V the same 5.1 pF part serves a bias feed or a matching stub, and the band above says which of the two it can be.
Energy is a short answer here: 25.5 nanojoule at 100 V with 0.51 nanocoulomb of charge. Because energy rises with the square of applied voltage, the same part run at half the rating carries a quarter of that figure.
Sourcing the 5.1 pF value and the second source
For 118DEA5R1M100TT at 100 V the order needs the capacitance code, the tolerance letter, the dielectric style, the case letter and the termination, plus a pack quantity. Component Lead Time Solutions, Pin to Pin Cross Reference, Kitting Service carries the sourcing side, and a replacement is checked on those fields before date code and lot records are compared. SUPERB works as a sourcing and assembly partner for RF, medical, telecom, military and radar programmes, so the discussion starts from the bill of materials and the schedule.
A 5.1 pF part at 100 V is a line item before it is a component, so the order carries the pack quantity, the date code and the incoming check together with the number. Where the value has to be replaced, the second source is matched on capacitance, tolerance, voltage, dielectric and case, and only then on the certificate.
On a 5.1 pF part at 100 V the practical sourcing risk is substitution, not availability: a part with the same capacitance and a wider window fits the pad and fails the stage. The fields to compare are capacitance, tolerance, voltage, dielectric and case, and the case letter is confirmed at the same time because it sets the pad.