116RJ100K100TT KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
116RJ100K100TT — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 116RJ100K100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 116RJ100K100TT |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 116RJ100K100TT |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 116RJ100K100TT from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 116RJ100K100TT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
116RJ100K100TT: 10.0 pF single layer capacitor at 100 V
Read 116RJ100K100TT from the left and every position is already fixed. The first three characters name the 116 Series, the next letter is the case, J follows as the dielectric code, 100 carries two significant digits and a count of zeros, which reads 10.0 pF, the letter after that is the tolerance at plus or minus 10 percent, 100 is the voltage field and the closing TT is the termination. Nothing in that string is a preference, so the order is checked against the number rather than against the family name.
| Series and outline | 116 Series Microcap, single layer, case R at 0.015 inch (0.381 mm) |
| Dielectric | J, dielectric constant 1100 |
| Capacitance | 10.0 pF, code 100 |
| Tolerance | K, plus or minus 10 percent, a window of 9.000 to 11.0 pF |
| Rated voltage | 100 VDC, three digit voltage field |
| Termination | TT, titanium tungsten with nickel and gold, over 100 micro inch gold |
| Body thickness | 0.0045 to 0.012 inch (0.114 to 0.305 mm) |
| Dielectric capacitance range | printed per dielectric on the dielectric page |
| Operating frequency | printed up to 100 GHz for the single layer family |
| Insulation resistance | 1 x 10^11 ohm minimum at plus 25 degrees C at rated voltage |
| Dielectric test | 250 percent of rated voltage for 5 seconds |
| Environmental limits | built to meet the limits of MIL-C-49464 |
| Test methods | MIL-STD-202 methods 104, 106, 108, 208 and 210 |
| Life test condition | plus 125 degrees C at twice rated voltage |
| Series resonance | printed as a typical curve only, with no numeric table |
| Bond strength | MIL-STD-883 method 2019 die shear |
| Wire bondability | MIL-STD-883 method 2011 and MIL-C-49464 paragraph 3.12 |
| RoHS | compliant, as for every product in this catalogue |
| Reactance at 1 GHz | 15.9 ohm nominal |
| Stored energy at 100 V | 50.0 nanojoule |
The tolerance letter is the field that decides acceptance. K on 10.0 pF pins the part to plus or minus 10 percent, a window of 9.000 to 11.0 pF, and a letter read as close on a quotation can widen that band several times over. On a tuning position at 100 V that window, not the nominal value, is what the first article measures.
The last five characters of 116RJ100K100TT are as load bearing as the first three: the tolerance letter K, the 100 V field and the TT finish decide what the part is accepted at and how it is attached. On a 10.0 pF body that leaves nothing ambiguous for a second source to interpret, which is the point of a printed number.
Case R body, TT termination and assembly
Case R is 0.015 inch (0.381 mm) square, and the body thickness of the 116 Series runs from 0.0045 to 0.012 inch (0.114 to 0.305 mm). On a 10.0 pF part at 100 V that outline is what the placement and the bond program work from, so a value change inside the same case letter keeps the footprint as it is.
The finish on this part is declared inside the number. TT means titanium tungsten, nickel and gold, over 100 micro inch gold over 1500 to 2000 angstrom nickel over 500 angstrom titanium tungsten, the standard finish for the family, and it is the layer a process engineer reads before choosing between solder and a wire bond on a 10.0 pF part.
Dielectric J and the 100 V rating
Dielectric J is a high K material with a dielectric constant of 1100, and the sheet prints its coefficient as plus 5 to minus 15 percent over the range from minus 55 to plus 125 degrees C. On 10.0 pF that is about 1.5000 pF at the low edge of the range, small against the plus or minus 10 percent the tolerance letter allows, so the coefficient and the window are read together rather than in turn.
J is the coefficient of 116RJ100K100TT, printed as plus 5 to minus 15 percent over the range over minus 55 to plus 125 degrees C, and 1100 is its dielectric constant. Across that span a 10.0 pF body moves by about 1.5000 pF at the low edge of the range, which is the figure a tuned stage sees on top of the plus or minus 10 percent window.
At 100 V the part is at the printed ceiling for the family, with a test at 250 percent of rating for 5 seconds, an insulation resistance floor of 1 x 10^11 ohm at plus 25 degrees C and qualification to MIL-STD-202 methods 104, 106, 108, 208 and 210. For this dielectric the catalogue states the capacitance range and the dissipation factor on its own page, and neither is repeated here.
What 10.0 pF does from 30 MHz to 2.45 GHz
At 30 MHz the 10.0 pF body at 100 V presents 530.5 ohm, at 150 MHz 106.1 ohm, at 500 MHz 31.8 ohm, at 1 GHz 15.9 ohm and at 2.45 GHz 6.50 ohm, and against a 50 ohm line the value reaches 50 ohm at about 318 MHz, inside the band. The sheet rates the family to 100 GHz, so the same body keeps falling in reactance well above this table until the printed resonance curve turns it back.
As a series element into 50 ohm the 10.0 pF value turns over at 318 MHz. That figure belongs to this body at 100 V in a 50 ohm system and moves with the surrounding impedance, so it is quoted with the load rather than on its own.
Nothing in this block quotes a dissipation figure in ohms or an amperage, because the catalogue prints curves for both and no ceiling. What can be computed for the 10.0 pF part at 100 V is the reactance column above, the drift across the temperature range and the stored energy at the rating.
Stored energy at the rating is 50.0 nanojoule on the 10.0 pF part, from one half C V squared, and the stored charge is 1.00 nanocoulomb at 100 V. On a signal line those two figures are small, which is the reason this value is bought for coupling and matching rather than for holding energy.
Sourcing the 10.0 pF value and the second source
On the stock side this part number is listed in the printed Quik Pick selection, which the catalogue describes as 48 hour shipment with a 100 piece cap pac minimum per value. A 10.0 pF order at 100 V is therefore small in pieces and quick in lead time. RF Component Sourcing, Component Lead Time Solutions, Kitting Service covers the sourcing side for a board that needs its other RF parts as well, and SUPERB supports radio frequency, medical, telecom, military and radar builds from component supply through assembly and test, with this series supplied through channel stock.
At 100 V and 10.0 pF the buying question is not only price: the case letter, the dielectric code and the date code decide what the line can accept. A replacement is compared on capacitance, tolerance, voltage, dielectric and case, in that order, because a different case changes the pad and a different dielectric changes the coefficient.
For the 10.0 pF value at 100 V the sourcing conversation is short once the drawing is in hand: capacitance code, tolerance letter, dielectric code, case letter and termination, then the pac quantity. Everything after that is date code, packing and freight, and those are quoted rather than assumed.