Contact Us

100E511KW2500X KYOCERA AVX RF Capacitor

Brand: ATC
The 100E511KW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

100E511KW2500X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 100E511KW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number100E511KW2500X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number100E511KW2500X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 100E511KW2500X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 100E511KW2500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

100E511KW2500X: 510 pF at 2500 V in the case E body

Break 100E511KW2500X into its fields and nothing is left to read from a headline. The series is 100, the case is E, the capacitance code 511 gives 510 pF, the tolerance letter K gives plus or minus 10 percent, the termination letter W gives tin and lead solder plated over a nickel barrier, the voltage field is 2500 VDC, and the X field is laser marking.

Case E is the 9.65 mm square porcelain body carrying 510 pF with K tolerance at 2500 V, 4.32 mm maximum thickness with a 1.02 mm maximum termination overlap. The dielectric is P90 porcelain at plus 90 plus or minus 30 ppm per degree C, the series is rated minus 55 to plus 125 degrees C with no derating of the working voltage, and quality factor is published as greater than 10,000 at 1 MHz from 1 pF to 1000 pF, and at 1 kHz above that range for a 510 pF body. Marked at 510 pF and 2500 V, this code carries 1275 nanocoulomb at the rating.

The temperature coefficient is plus 90 plus or minus 30 ppm per degree C over minus 55 to plus 125 degrees C, so the 510 pF value behind the 1594 microjoule at 2500 V drifts by parts per million rather than by percent across the rating of the K part. Packing is not carried in the code 100E511KW2500X; the table gives tape and reel at 250 pieces or a tray of 24 or 96, and the count on the label has to match the count on the reel.

Series and case100E, case E, 9.65 mm by 9.65 mm
Capacitance510 pF, code 511
ToleranceK, plus or minus 10 percent, a window of 459 to 561 pF
Working voltage2500 VDC, 1768 V RMS at 0.707 times the DC rating
Dielectric withstanding3000 V for five seconds, 120 percent of the working voltage
Life test2500 V for 2000 hours at 125 degrees C, 100 percent of the working voltage
Temperature coefficientplus 90 plus or minus 30 ppm per degree C
Operating rangeminus 55 to plus 125 degrees C with no derating of the working voltage
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, both measured at 500 VDC
Leakage floor25 nA at 2500 V and 250 nA at 125 degrees C, computed from those resistance floors
Stored energy1594 microjoule at the working voltage, from one half C V squared
Stored charge1275 nanocoulomb at the working voltage
Reactance at 150 MHz2.08 ohm nominal
Reactance at 500 MHz0.62 ohm nominal
Series resonanceplotted against capacitance for the series, read from that curve rather than quoted here
ESRcurves at 30, 150, 500 and 1000 MHz, printed at 10, 100, 1000 and 5100 pF for the series
Quality factorGreater than 10,000 at 1 MHz from 1 pF to 1000 pF, and at 1 kHz above that range
TerminationW, tin and lead solder plated over a nickel barrier, a lead bearing finish
Marking and packinglaser marking; tape and reel at 250 pieces, or a tray of 24 or 96 pieces
Mounting padA .405, B .050, C .325 and D .425 inch on the normal density pad, .385, .030, .325 and .385 on the high density one

What 510 pF does from 30 MHz to 1 GHz

At 30 MHz this 510 pF body presents 10.4 ohm, at 150 MHz 2.08 ohm, at 500 MHz 0.62 ohm and at 1 GHz 0.31 ohm. Above a few hundred picofarads the 510 pF part is a bypass and a DC block, so the useful question is how low the impedance stays at the top of the band, and 0.31 ohm at 1 GHz answers it better than the nominal capacitance does.

Tolerance is easier to judge in reactance than in picofarads. At 500 MHz the K window of 459 to 561 pF lands at 0.567 ohm at the top of the window and 0.693 ohm at the bottom, a spread of 0.126 ohm between the two ends against a 0.624 ohm nominal, which is 20.2 percent of that reactance. For a 510 pF part at 500 MHz the 20.2 percent spread is the number to quote to the circuit owner, and the K letter follows from that number rather than from habit.

For the 510 pF code in K tolerance the data sheet draws series resonance against capacitance and prints the points at 10, 100, 1000 and 5100 pF rather than a number for every value. Scaling the nearest published point of 365 MHz at 100 pF by the square root of the capacitance ratio gives about 162 MHz for 510 pF if the series inductance stayed put, and that is an estimate for a starting point, not a specification: the resonance curve is the document that decides, because the internal electrode pattern moves the inductance with the value.

Where a 510 pF case E part is chosen

Chosen above a few hundred picofarads, the capacitor is the low impedance element in the circuit: the return path behind a radio frequency power stage, the shunt leg of a filter, the reservoir at a bias feed and the DC block into a load. At 500 MHz its 0.62 ohm is 1.2 percent of the line, and the question at this value is current and self heating rather than tolerance.

High frequency power amplifiers, transmitters, antenna tuning, plasma chambers and magnetic resonance coils are the circuits the series lists, and all of them put radio frequency current through the body at a working voltage that leaves little room: a 510 pF part in K tolerance at 2500 V carries 1275 nanocoulomb per half cycle, so the current is set by the frequency and not by the capacitance alone.

A 510 pF part in K tolerance rated 2500 V is tested at 3000 V for five seconds and at 2500 V for 2000 hours at 125 degrees C, 120 and 100 percent of the rating. The 25 nA and 250 nA leakage figures for this 510 pF body follow from the insulation resistance floors and land as 250 mV on a 1 Mohm node at 125 degrees C.

Questions that arrive with a shortage quote

On a shortage, is a different tolerance letter a legal swap for the K code? The ceramic and the case do not change and the letter is a sort, so the question is only how much window the circuit absorbs. At 510 pF the K window is 459 to 561 pF, the next grade tighter is J at plus or minus 5 percent, and the next grade looser is M at plus or minus 20 percent. At 500 MHz those ends land at 0.567 ohm at the top of the window and 0.693 ohm at the bottom, a spread of 0.126 ohm against a 0.624 ohm nominal, so a match or a filter has to hold the K letter while a bypass position does not care. The order for 100E511KW2500X goes out with the tolerance letter we have confirmed, not the one that was asked for, and the shipping documents repeat it.

What proof comes with a K part? Three fields decide whether the lot is usable: a capacitance measurement at the frequency the series specifies, which for this value is 1 MHz, a withstanding record against 3000 V for five seconds, and the finish code, because W is tin and lead and a restricted build needs a deviation. The K letter has to be on the label as well, because a reel marked only with 510 pF does not say whether the window is 459 to 561 pF or a wider one.

Can this K letter be ordered with a different finish? Yes, the finish is a field of its own: for a 510 pF part in K tolerance W is tin and lead over nickel and is lead bearing, T is the RoHS compliant tin over nickel, P is a heavy tin and lead pellet, CA a gold chip, MS a microstrip style, and AR, AW and RW the leaded outlines. The body stays the same 510 pF at 2500 V, so the change is a compliance and mounting decision, and the packing still comes from the mechanical table at 250 pieces on tape and reel or 24 or 96 in a tray.

What to send with an enquiry

Four fields decide the price and the date: quantity, target date, the full order code 100E511KW2500X with the tolerance and termination letters, and the packing the line accepts. Give us the complete code 100E511KW2500X and the revision is checked before anything is priced, with date codes, packing and country of origin confirmed on the quotation itself. The Component Lead Time Solutions page sets out how a radio frequency bill is sourced and what a second source has to prove, the Pin to Pin Cross Reference page covers the route when a value is on allocation, and the Kitting Service page sets out the packing, kitting and inspection options a production line asks for.