100E220KW3600X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
100E220KW3600X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 100E220KW3600X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 100E220KW3600X |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 100E220KW3600X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 100E220KW3600X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 100E220KW3600X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
100E220KW3600X: 22 pF at 3600 V in the case E body
Read 100E220KW3600X from the left and every character is a decision that has to match the drawing. 100 is the series, E is the case, 220 is the EIA capacitance code, so the marked value is 22 pF, K sets the window at plus or minus 10 percent, W is the lead bearing tin and lead plate over a nickel barrier, 3600 is the working voltage, and X is laser marking.
Case E is the 9.65 mm square porcelain body carrying 22 pF with K tolerance at 3600 V, 4.32 mm maximum thickness with a 1.02 mm maximum termination overlap, and that square is what buys the voltage: 143 microjoule at 3600 V is the whole stored energy of the part, so the body is sized for the field across the porcelain rather than for the energy it holds.
P90 porcelain carries the temperature coefficient of plus 90 plus or minus 30 ppm per degree C across the whole minus 55 to plus 125 degrees C range, and the 143 microjoule held by the 22 pF code in K tolerance at 3600 V moves with the square of the voltage rather than with temperature. The string stops at laser marking, so packing is a separate field for 100E220KW3600X: 250 pieces on tape and reel, or 24 or 96 in a tray, with the label count matching the box.
| Series and case | 100E, case E, 9.65 mm by 9.65 mm |
| Capacitance | 22 pF, code 220 |
| Tolerance | K, plus or minus 10 percent, a window of 19.8 to 24.2 pF |
| Working voltage | 3600 VDC, 2545 V RMS at 0.707 times the DC rating |
| Dielectric withstanding | 4320 V for five seconds, 120 percent of the working voltage |
| Life test | 3600 V for 2000 hours at 125 degrees C, 100 percent of the working voltage |
| Temperature coefficient | plus 90 plus or minus 30 ppm per degree C |
| Operating range | minus 55 to plus 125 degrees C with no derating of the working voltage |
| Insulation resistance | 10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, both measured at 500 VDC |
| Leakage floor | 36 nA at 3600 V and 360 nA at 125 degrees C, computed from those resistance floors |
| Stored energy | 143 microjoule at the working voltage, from one half C V squared |
| Stored charge | 79.2 nanocoulomb at the working voltage |
| Reactance at 150 MHz | 48.23 ohm nominal |
| Reactance at 500 MHz | 14.47 ohm nominal |
| Series resonance | plotted against capacitance for the series, read from that curve rather than quoted here |
| ESR | curves at 30, 150, 500 and 1000 MHz, printed at 10, 100, 1000 and 5100 pF for the series |
| Quality factor | Greater than 10,000 at 1 MHz from 1 pF to 1000 pF, and at 1 kHz above that range |
| Termination | W, tin and lead solder plated over a nickel barrier, a lead bearing finish |
| Marking and packing | laser marking; tape and reel at 250 pieces, or a tray of 24 or 96 pieces |
| Mounting pad | A .405, B .050, C .325 and D .425 inch on the normal density pad, .385, .030, .325 and .385 on the high density one |
What 22 pF does from 30 MHz to 1 GHz
At 30 MHz this 22 pF body presents 241.14 ohm, at 150 MHz 48.23 ohm, at 500 MHz 14.47 ohm and at 1 GHz 7.23 ohm. The value sits where the part stops being a match and starts being a low impedance across a band: at 150 MHz it is already 48.23 ohm, which is 96 percent of a 50 ohm line, and at 1 GHz it is 7.23 ohm.
Tolerance is easier to judge in reactance than in picofarads. At 150 MHz the K window of 19.8 to 24.2 pF lands at 43.84 ohm at the top of the window and 53.59 ohm at the bottom, a spread of 9.743 ohm between the two ends against a 48.23 ohm nominal, which is 20.2 percent of that reactance. That 20.2 percent is why the K letter is written on the order for a 22 pF part, and why the same value in a bypass role at 150 MHz can take a wider one.
For the 22 pF code in K tolerance the data sheet draws series resonance against capacitance and prints the points at 10, 100, 1000 and 5100 pF rather than a number for every value. Scaling the nearest published point of 1110 MHz at 10 pF by the square root of the capacitance ratio gives about 748 MHz for 22 pF if the series inductance stayed put, and that is an estimate for a starting point, not a specification: the resonance curve is the document that decides, because the internal electrode pattern moves the inductance with the value.
Where a 22 pF case E part is chosen
Chosen at 22 pF, this part is a DC block and a coupling element: between a driver and a final, in the feed of an antenna, into the input of a mixer, and as the shunt element behind a bias line. At 150 MHz the reactance is 48.23 ohm, which is low enough to be a short and high enough to still be counted in the match, and that is the range this value is bought for.
The applications the series is written for are radio frequency power amplifiers, transmitters, antenna tuning, plasma chambers and magnetic resonance coils, and a 22 pF part in K tolerance at 3600 V belongs to one of them. Each of those circuits loads the body with radio frequency current at 150 MHz, so the current chart and the 48.23 ohm of reactance matter more than the nominal value printed on the reel.
The voltage rules for this 22 pF code in K tolerance at 3600 V are a withstanding test at 4320 V for five seconds, 120 percent of the rating, and a life test at 3600 V for 2000 hours at 125 degrees C, 100 percent. Leakage computed from the 10^5 and 10^4 Mohm floors for the 22 pF body in K tolerance is 36 nA at 25 degrees C and 360 nA at 125 degrees C, which is 360 mV across 1 Mohm at the hot end.
Questions that arrive with a shortage quote
If the K grade is on allocation, will another letter do? The ceramic and the case do not change and the letter is a sort, so the question is only how much window the circuit absorbs. At 22 pF the K window is 19.8 to 24.2 pF, the next grade tighter is J at plus or minus 5 percent, and the next grade looser is M at plus or minus 20 percent. At 150 MHz those ends land at 43.84 ohm at the top of the window and 53.59 ohm at the bottom, a spread of 9.743 ohm against a 48.23 ohm nominal, so a match or a filter has to hold the K letter while a bypass position does not care. For 100E220KW3600X the quotation names the grade we can actually ship rather than the one in the request, so the line never receives a window it did not ask for.
Which documents should travel with the 100E220KW3600X reel? The lot and date code, a capacitance measurement at the series test frequency with the fixture stated, the withstanding result at 4320 V for five seconds, and a statement of the finish, because the W option is lead bearing. For a 22 pF part with a K window the capacitance reading alone is not enough either, since 19.8 to 24.2 pF can both sit inside the drawing while one end is outside the circuit's window.
How much does the termination letter change? W is tin and lead solder plated over a nickel barrier and is lead bearing, and on a 22 pF part in K tolerance the alternatives are T for the RoHS compliant tin over the same barrier, P for a heavy tin and lead pellet, CA is a gold chip, MS is a microstrip part with silver leads, and AR, AW and RW are the leaded outlines. On a 22 pF 3600 V body the letter changes the finish, the mounting style and the compliance statement, and it does not change the capacitance or the working voltage. Packing for a 22 pF K reel follows the same mechanical table, tape and reel at 250 pieces or a tray of 24 or 96.
What to send with an enquiry
Four fields decide the price and the date: quantity, target date, the full order code 100E220KW3600X with the tolerance and termination letters, and the packing the line accepts. With the full string for 100E220KW3600X in hand we check the revision in force, then confirm date codes, packing and country of origin on the quotation. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the Incoming Inspection Plan page covers the route when a value is on allocation, and the Date Code Management page sets out the packing, kitting and inspection options a production line asks for.