Contact Us

100C751FW1000X KYOCERA AVX RF Capacitor

Brand: ATC
The 100C751FW1000X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

100C751FW1000X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 100C751FW1000X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number100C751FW1000X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number100C751FW1000X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 100C751FW1000X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 100C751FW1000X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

100C751FW1000X: 750 pF at 1000 V in the C case

Read the string from the left and every character is a decision that was made before the order. 100 is the porcelain Superchip series, C is the case, 751 is the capacitance code from the EIA system where the first two digits are the significant figures and the third is the number of zeros, F is the tolerance code at plus or minus 1 percent, W is the termination code, 1000 is the working voltage, X is laser marking, and the packing is set by the mechanical configuration table. The same capacitance in another case is a different order code, and the case change moves the current rating before it moves anything else.

The body is a high density porcelain multilayer chip in the C case, 5.84 mm by 6.35 mm, the .250 inch square body, built for high radio frequency current and voltage rather than for density. The data sheet gives no single Q line for this series, because the number moves with capacitance. It publishes Q and ESR as curves against capacitance at 30, 150, 500 and 1000 MHz, and those curves are what a high power stage is checked against. The W finish, tin and lead solder over a nickel barrier, is lead bearing, so a restricted build needs a deviation to use it. The marking is laser, so the value survives a solvent clean.

Series and case100C, case C, 5.84 mm by 6.35 mm, the .250 inch square body
Capacitance750 pF, code 751
ToleranceF, plus or minus 1 percent
Working voltage1000 VDC, 707 V RMS at 0.707 times the DC rating
Withstanding voltage1500 V for five seconds, 150 percent of the working voltage
Temperature coefficient+90 plus or minus 30 ppm per degree C from minus 55 to plus 125 degrees C
Operating rangeminus 55 to plus 125 degrees C with no derating of the working voltage across the range
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C
Leakage floor10.0 nA at 1000 V at 25 degrees C and 100 nA at 125 degrees C, from the resistance floors
Stored energy375.0 microjoule at the working voltage, from one half C V squared
Quality factorESR and Q curves at 30, 150, 500 and 1000 MHz
TerminationW, tin and lead solder plated over a nickel barrier, a lead bearing finish
Marking and packinglaser marking; no packaging letter, so the packing is read from the mechanical configuration table (tray or tape and reel)
StabilityAging effects are none, piezoelectric effects are none, and retrace and capacitance drift are both quoted at less than plus or minus 0.02 percent or 0.02 pF, whichever is greater
Terminal strengtha pull of 10 lb minimum and 20 lb typical against the termination surface for five seconds, MIL-STD-202 method 211

What 750 pF does from 30 MHz to 1 GHz

The reactance arithmetic is the first filter on a part like this. At 30 MHz, 750 pF is 7.1 ohm; at 150 MHz it is 1.4 ohm; at 500 MHz it is 0.42 ohm; and at 1 GHz it is 0.21 ohm. The series publishes ESR and Q as curves against capacitance at 30, 150, 500 and 1000 MHz, so the loss for this value is read from the curve rather than from a single line, and the current rating is based on a 65 degrees C mounting surface with a thermal resistance of 20 degrees C per watt, which is 3 W of dissipation to reach a 125 degrees C case. That budget, not the capacitance, is what a 1000 V high power stage has to respect.

Reactance at 30 MHz7.1 ohm
Reactance at 150 MHz1.4 ohm
Reactance at 500 MHz0.42 ohm
Reactance at 1000 MHz0.21 ohm
Working voltage1000 VDC, 707 V RMS

Where a 750 pF C case part is chosen

Above 600 pF the part is a bypass and a low frequency decoupling element in a radio frequency supply, and a DC block in the high current leg of a plasma or MRI circuit. At 750 pF the reactance is 7.1 ohm at 30 MHz and 1.4 ohm at 150 MHz, so the part behaves as a short at the bottom of the band and as a resonant element higher up. The working voltage, not the capacitance, is what decides whether it can be used in a 1000 V position, and the C case is the one that carries the current.

Questions that arrive with a shortage quote

What does the F code buy over a G part? F is the tightest code listed for this value, so the window is plus or minus 1 percent, which is plus or minus 7.5 pF on 750 pF. The next grade is G at 2 percent, or plus or minus 15 pF, and a 5 percent part is plus or minus 37.5 pF. On a filter or a matching section that difference moves the centre frequency, which is why the tight code exists; on a bypass position it is invisible. We ship the code on the order and we do not upgrade or downgrade it silently, because a tighter part in place of a wider one changes the price and a wider part in place of a tight one changes the circuit.

Why is the withstanding test only 150 percent at 1000 V? The series rule steps down with voltage: 250 percent up to 500 V, 150 percent up to 1250 V, and 120 percent above that. At 1000 V the test is 1500 V for five seconds, and the life test applies 120 percent of the working voltage for 2000 hours at 125 degrees C. A 1500 V or 2500 V part therefore carries a smaller multiple, not a weaker body, and the number to work against is the working voltage rather than the test level.

What has to be on the certificate? Three things that a broker line often leaves off: the date code and the lot, the measured capacitance at 1 MHz with the test fixture stated, and the finish, because the tin and lead option is lead bearing and a restricted build cannot take it without a deviation. This code carries no packing letter, so the tray or reel decision has to be written on the order. A reel that has been re-taped in a warehouse is not the same as one from the factory, and the count on the label has to match the count on the reel.

What to send with an enquiry

Four fields decide the price and the date: quantity, target date, the full order code with the tolerance and the termination letters, and the packing the line accepts. Send the whole string and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the Component Lead Time Solutions page covers the second source route when the value is on allocation, and the Kitting Service page sets out the packing, kitting and inspection options a production line asks for.