Contact Us

100C750JW2500X KYOCERA AVX RF Capacitor

Brand: ATC
The 100C750JW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

100C750JW2500X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 100C750JW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number100C750JW2500X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number100C750JW2500X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 100C750JW2500X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 100C750JW2500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

100C750JW2500X: 75 pF at 2500 V in the case C body

Nothing in the order code is decoration. The first three characters name the series and the case, 100 for the porcelain Superchip series and C for the case. Then come 750 for the capacitance, J for plus or minus 5 percent, W for the termination, 2500 for the working voltage and X for laser marking, with the packing left to the mechanical configuration table. A value in another case is another order code, and the case is what sets the current the body can pass before anything else changes.

Inside the 5.84 mm by 6.35 mm C case sits a porcelain multilayer stack, the construction that gives this series its current and voltage capability in a body this size. The drawing carries plus 0.51 or minus 0.25 mm on the 5.84 mm side and plus or minus 0.38 mm on the 6.35 mm side, which is what a land pattern has to allow for. Q is not a single number here: the data sheet plots it against capacitance at 30, 150, 500 and 1000 MHz, so a 1 pF member and a 2400 pF member sit on two different parts of the same curve. The W termination is tin and lead solder over a nickel barrier, a lead bearing finish, and the marking is laser rather than ink.

Series and case100C, case C, 5.84 mm by 6.35 mm, the .250 inch square body
Capacitance75 pF, code 750
ToleranceJ, plus or minus 5 percent, a window of 3.75 pF around the marked value
Working voltage2500 VDC, 1768 V RMS at 0.707 times the DC rating
Withstanding voltage3000 V for five seconds, 120 percent of the working voltage
Life test2500 V for 2000 hours at 125 degrees C, 100 percent of the working voltage
Temperature coefficient+90 plus or minus 30 ppm per degree C from minus 55 to plus 125 degrees C
Operating rangeminus 55 to plus 125 degrees C with no derating of the working voltage
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, measured at a maximum of 500 VDC whatever the rating
Leakage floor25.0 nA at 2500 V at 25 degrees C and 250 nA at 125 degrees C, from the resistance floors
Stored energy234 microjoule at the working voltage, from one half C V squared
Reactance at 500 MHz4.24 ohm nominal
Series resonanceplotted against capacitance for the series; the part is inductive above it
Quality factorESR and Q curves at 30, 150, 500 and 1000 MHz
TerminationW, tin and lead solder plated over a nickel barrier, a lead bearing finish
Marking and packinglaser marking; no packaging letter on this code, so the packing is read from the mechanical configuration table, tape and reel or a tray of 180 pieces
Terminal strength10 lbs minimum, 20 lbs typical, for five seconds, MIL-STD-202 method 211
Environmental schedulethermal shock method 107 condition A, moisture resistance method 106, low voltage humidity method 103 at 1.5 VDC, 85 degrees C and 85 percent relative humidity for 240 hours
Stabilityaging effects none, piezoelectric effects none, retrace and capacitance drift both under 0.02 percent or 0.02 pF, whichever is greater
Current rating basisa 65 degrees C mounting surface with 15 degrees C per watt of thermal resistance, so 4 W of dissipation brings the case to 125 degrees C

What 75 pF does from 30 MHz to 1 GHz

At 30 MHz this 75 pF body presents 70.7 ohm, at 150 MHz 14.1 ohm, at 500 MHz 4.24 ohm and at 1 GHz 2.12 ohm. At 500 MHz the body is 4.24 ohm against a 50 ohm line, which is 0.08 of the line, and at 1 GHz it is 2.12 ohm. The difference between those two readings is the reason a coupling value has to be checked at the frequency the stage actually runs at rather than at the band name.

Tolerance is easier to judge in reactance than in picofarads. At 500 MHz this 75 pF body presents 4.24 ohm. The J window of 3.75 pF moves that to 4.04 ohm at 78.8 pF and to 4.47 ohm at 71.2 pF, a spread of 0.425 ohm, which is 10.03 percent of the nominal reactance. Against a 50 ohm line the larger reading is 0.09 of the line impedance, so the window is a small part of the match and the J code is a trim question rather than a rework.

Termination strength is part of the specification and not a footnote: 10 lbs minimum and 20 lbs typical for five seconds in the direction perpendicular to the termination surface, tested to MIL-STD-202 method 211. On a 75 pF part that matters less than the current, but on the same case size at the top of the capacitance range it is the termination that fails first, which is why the figure is quoted for the series rather than per value.

Where a 75 pF case C part is chosen

A part in the tens of picofarads sits in the middle of the series and is bought for the middle of its behaviour: low enough impedance at 500 MHz to couple, high enough at 30 MHz that the stage it feeds is not loaded. Typical positions are the coupling element in a driver chain, the shunt leg of a harmonic filter and the series element in an impedance matching network for a narrowband antenna. The 2500 V working voltage and the 120 percent withstanding test are what let the same body sit in a high voltage node without a second part number.

The rating here is 2500 V, twice the 1250 V break and five times the 500 V one. The withstanding test is 120 percent of the rating, 3000 V for five seconds, and the life test applies 100 percent of the rating, 2500 V, for 2000 hours at 125 degrees C. Those multiples are smaller than a 500 V part carries, which is the ladder stepping down and not a weaker body. At the rating this part leaks 25.0 nA at 25 degrees C and 250 nA at 125 degrees C, so on a 1 Mohm node that floor alone is 250 mV of offset at the higher temperature, and the bias network has to be able to absorb it.

Questions that arrive with a shortage quote

Can the J code be swapped for another grade on a shortage? The body is the same ceramic and the code is a sort, so the question is only how much window the circuit can absorb. At 75 pF the J window is 3.75 pF, the next grade tighter is G at 2 percent and the next grade looser is K at 10 percent. At 500 MHz that window moves the reactance between 4.04 ohm at 78.75 pF and 4.47 ohm at 71.25 pF, so on an impedance match or a filter the code has to be held, while on a bypass position it is invisible. We quote the code on the order and we state on the quotation the code we can actually ship, so the two never get mixed on the line.

How is the withstanding test set at 2500 V? The series rule steps down with voltage: 250 percent up to 500 V, 150 percent up to 1250 V, and 120 percent above that. At 2500 V the test is 3000 V for five seconds, and the life test applies 100 percent of the working voltage for 2000 hours at 125 degrees C, which is 2500 V. A 2500 V or 1500 V part therefore carries a smaller test multiple, not a weaker body, and the number to work against in a circuit is the working voltage rather than the test level.

What has to be on the certificate? Three things that a broker line often leaves off: the date code and the lot, the measured capacitance at 1 MHz with the test fixture stated, and the finish, because the tin and lead option is lead bearing and a restricted build cannot take it without a deviation. A 75 pF part at 2500 V also has to carry its sorting code on the paperwork, since the value alone does not tell the line which window arrived. This code has no packing letter, so the tray or reel decision has to be written on the order, and the count on the label has to match the count on the reel.

What to send with an enquiry

A quotation for this part needs four things from the buyer: quantity, target date, the complete order code including the tolerance and finish letters, and the packing the line can accept. Send the whole string and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The Supplier Deviation Waiver Process page sets out how a deviation is raised and closed, the Date Code Management page sets out how date codes and lot numbers are recorded and shipped, and the Component Lead Time Solutions page covers the second source route when a value is on allocation.