100C6R2BW2500X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
100C6R2BW2500X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 100C6R2BW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 100C6R2BW2500X |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 100C6R2BW2500X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 100C6R2BW2500X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 100C6R2BW2500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
100C6R2BW2500X: 6.2 pF at 2500 V in the C case
Read the string from the left and every character is a decision that was made before the order. 100 is the porcelain Superchip series, C is the case, 6R2 is the capacitance code from the EIA system where the first two digits are the significant figures and the third is the number of zeros, B is the tolerance code at plus or minus 0.1 pF, W is the termination code, 2500 is the working voltage, X is laser marking, and the packing is set by the mechanical configuration table. The same capacitance in another case is a different order code, and the case change moves the current rating before it moves anything else.
The body is a high density porcelain multilayer chip in the C case, 5.84 mm by 6.35 mm, the .250 inch square body, built for high radio frequency current and voltage rather than for density. The data sheet gives no single Q line for this series, because the number moves with capacitance. It publishes Q and ESR as curves against capacitance at 30, 150, 500 and 1000 MHz, and those curves are what a high power stage is checked against. The W finish, tin and lead solder over a nickel barrier, is lead bearing, so a restricted build needs a deviation to use it. The marking is laser, so the value survives a solvent clean.
| Series and case | 100C, case C, 5.84 mm by 6.35 mm, the .250 inch square body |
| Capacitance | 6.2 pF, code 6R2 |
| Tolerance | B, plus or minus 0.1 pF |
| Working voltage | 2500 VDC, 1768 V RMS at 0.707 times the DC rating |
| Withstanding voltage | 3000 V for five seconds, 120 percent of the working voltage |
| Temperature coefficient | +90 plus or minus 30 ppm per degree C from minus 55 to plus 125 degrees C |
| Operating range | minus 55 to plus 125 degrees C with no derating of the working voltage across the range |
| Insulation resistance | 10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C |
| Leakage floor | 25.0 nA at 2500 V at 25 degrees C and 250 nA at 125 degrees C, from the resistance floors |
| Stored energy | 19.4 microjoule at the working voltage, from one half C V squared |
| Quality factor | ESR and Q curves at 30, 150, 500 and 1000 MHz |
| Termination | W, tin and lead solder plated over a nickel barrier, a lead bearing finish |
| Marking and packing | laser marking; no packaging letter, so the packing is read from the mechanical configuration table (tray or tape and reel) |
| Stability | Aging effects are none, piezoelectric effects are none, and retrace and capacitance drift are both quoted at less than plus or minus 0.02 percent or 0.02 pF, whichever is greater |
| Terminal strength | a pull of 10 lb minimum and 20 lb typical against the termination surface for five seconds, MIL-STD-202 method 211 |
What 6.2 pF does from 30 MHz to 1 GHz
The reactance arithmetic is the first filter on a part like this. At 30 MHz, 6.2 pF is 856 ohm; at 150 MHz it is 171 ohm; at 500 MHz it is 51 ohm; and at 1 GHz it is 26 ohm. The series publishes ESR and Q as curves against capacitance at 30, 150, 500 and 1000 MHz, so the loss for this value is read from the curve rather than from a single line, and the current rating is based on a 65 degrees C mounting surface with a thermal resistance of 20 degrees C per watt, which is 3 W of dissipation to reach a 125 degrees C case. That budget, not the capacitance, is what a 2500 V high power stage has to respect.
| Reactance at 30 MHz | 856 ohm |
| Reactance at 150 MHz | 171 ohm |
| Reactance at 500 MHz | 51 ohm |
| Reactance at 1000 MHz | 26 ohm |
| Working voltage | 2500 VDC, 1768 V RMS |
Where a 6.2 pF C case part is chosen
Between 2 pF and 20 pF the part works as a coupling and DC blocking element in a 1 GHz to 6 GHz chain, and as the shunt leg of a matching section on a power amplifier output. The reactance is low enough to pass the band and high enough to be a real part of the match, which is why the value is quoted to a tight code rather than a wide one. In the C case the same value also appears in cavity and printed filters, where it tunes the last resonator to the band edge.
Questions that arrive with a shortage quote
Does the B tolerance code survive a temperature sweep? The code is a room temperature window of plus or minus 0.1 pF, and the temperature coefficient of the series is plus or minus 30 ppm per degree C, which at 6.2 pF is 0.019 pF over 100 degrees C. So the tolerance and the drift are separate budgets: a filter trimmed against the code alone still moves by the drift term, and that term is the one to put in the tolerance analysis.
How is a 2500 V part tested if the meter stops at 500 V? The insulation resistance line in the data sheet is measured at a maximum test voltage of 500 VDC whatever the rating, so the leakage figure on the certificate is taken well below the working voltage. The withstanding test is 120 percent of the working voltage, 3000 V for five seconds, and that one is done at full level. A buyer who wants leakage data at the rated voltage has to ask for it as a special test, and it is not part of the standard release.
What has to be on the certificate? Three things that a broker line often leaves off: the date code and the lot, the measured capacitance at 1 MHz with the test fixture stated, and the finish, because the tin and lead option is lead bearing and a restricted build cannot take it without a deviation. This code carries no packing letter, so the tray or reel decision has to be written on the order. A reel that has been re-taped in a warehouse is not the same as one from the factory, and the count on the label has to match the count on the reel.
What to send with an enquiry
Four fields decide the price and the date: quantity, target date, the full order code with the tolerance and the termination letters, and the packing the line accepts. Send the whole string and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the Pin to Pin Cross Reference page covers the second source route when the value is on allocation, and the One Stop BOM Sourcing page sets out the packing, kitting and inspection options a production line asks for.