100C621MW1000X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
100C621MW1000X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 100C621MW1000X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 100C621MW1000X |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 100C621MW1000X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 100C621MW1000X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 100C621MW1000X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
100C621MW1000X: 620 pF at 1000 V in the case C body
Every character in the string was fixed before the reel was booked. The string is a specification written in six fields: 100 for the series, C for the case, 621 for capacitance, M for plus or minus 20 percent, W for termination, 1000 for working voltage and X for marking, with packing left out of the code and read from the mechanical configuration table. The case is not cosmetic: the same capacitance in a different body is a different code and a different current rating.
Mechanically the part is 5.84 mm by 6.35 mm in the C case, plus 0.51 or minus 0.25 mm on one side and plus or minus 0.38 mm on the other, and electrically it is a porcelain multilayer chip built for radio frequency current rather than for capacitance per unit volume. That is why the data sheet answers the Q question with curves at 30, 150, 500 and 1000 MHz instead of a number, and why the current rating is a chart. The W suffix is a tin and lead finish over a nickel barrier, lead bearing, and the marking is laser.
| Series and case | 100C, case C, 5.84 mm by 6.35 mm, the .250 inch square body |
| Capacitance | 620 pF, code 621 |
| Tolerance | M, plus or minus 20 percent, a window of 124 pF around the marked value |
| Working voltage | 1000 VDC, 707 V RMS at 0.707 times the DC rating |
| Withstanding voltage | 1500 V for five seconds, 150 percent of the working voltage |
| Life test | 1200 V for 2000 hours at 125 degrees C, 120 percent of the working voltage |
| Temperature coefficient | +90 plus or minus 30 ppm per degree C from minus 55 to plus 125 degrees C |
| Operating range | minus 55 to plus 125 degrees C with no derating of the working voltage |
| Insulation resistance | 10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, measured at a maximum of 500 VDC whatever the rating |
| Leakage floor | 10.0 nA at 1000 V at 25 degrees C and 100 nA at 125 degrees C, from the resistance floors |
| Stored energy | 310 microjoule at the working voltage, from one half C V squared |
| Reactance at 500 MHz | 0.51 ohm nominal |
| Series resonance | plotted against capacitance for the series; the part is inductive above it |
| Quality factor | ESR and Q curves at 30, 150, 500 and 1000 MHz |
| Termination | W, tin and lead solder plated over a nickel barrier, a lead bearing finish |
| Marking and packing | laser marking; no packaging letter on this code, so the packing is read from the mechanical configuration table, tape and reel or a tray of 180 pieces |
| Terminal strength | 10 lbs minimum, 20 lbs typical, for five seconds, MIL-STD-202 method 211 |
| Environmental schedule | thermal shock method 107 condition A, moisture resistance method 106, low voltage humidity method 103 at 1.5 VDC, 85 degrees C and 85 percent relative humidity for 240 hours |
| Stability | aging effects none, piezoelectric effects none, retrace and capacitance drift both under 0.02 percent or 0.02 pF, whichever is greater |
| Current rating basis | a 65 degrees C mounting surface with 15 degrees C per watt of thermal resistance, so 4 W of dissipation brings the case to 125 degrees C |
What 620 pF does from 30 MHz to 1 GHz
At 30 MHz this 620 pF body presents 8.56 ohm, at 150 MHz 1.71 ohm, at 500 MHz 0.513 ohm and at 1 GHz 0.257 ohm. At 150 MHz a body this size is 1.71 ohm and at 30 MHz it is 8.56 ohm, so it is already a low impedance across the VHF band and a genuine short at the bottom of it. A bypass is bought for that, and the question that decides whether it survives is the current the case can carry at the frequency of the stage rather than the tolerance on the value.
Tolerance is easier to judge in reactance than in picofarads. At 150 MHz this 620 pF body presents 1.71 ohm. The M window of 124 pF moves that to 1.43 ohm at 744 pF and to 2.14 ohm at 496 pF, a spread of 0.713 ohm, which is 41.67 percent of the nominal reactance. Against a 50 ohm line the larger reading is 0.04 of the line impedance, so the window is invisible in the match and the question at this value is current rather than tolerance.
One number that does not appear on the label is the current the body will carry, and the data sheet gives it as a chart at 150 MHz and at 500 MHz against capacitance rather than as a single rating. The chart is drawn on the 65 degrees C mounting surface with 15 degrees C per watt, so 4 W of dissipation brings the case to 125 degrees C. A 620 pF member sits at one point on that chart and the point moves with frequency, which is why the same case size carries very different currents at 150 MHz and at 500 MHz.
Where a 620 pF case C part is chosen
The bypass and DC blocking positions are where a part this size earns its place: the return path under a radio frequency power stage, the blocking element ahead of a bias tee, the shunt arm of a low pass filter, and the decoupling of a supply feed into a chamber or a coil. The value is large enough that the reactance at 150 MHz is a fraction of a 50 ohm line, so the part behaves as a short in the band and the tolerance stops being the first question. What limits it is the current the body can carry and the voltage the stage stands on it, which is why the 1000 V rating and the 150 percent withstanding test come first.
1000 V lands in the middle band of the series rules, between the 500 V and 1250 V breaks. Five seconds at 1500 V covers the withstanding test, and the life test runs 1200 V for 2000 hours at 125 degrees C. The insulation resistance floor is measured at a maximum of 500 VDC whatever the rating, so no leakage figure on the certificate is taken at 1000 V: the floor is a resistance, and the current at the rating is the arithmetic that follows from it. At the rating this part leaks 10.0 nA at 25 degrees C and 100 nA at 125 degrees C, so on a 1 Mohm node that floor alone is 100 mV of offset at the higher temperature, and the bias network has to be able to absorb it.
Questions that arrive with a shortage quote
Can the M code be swapped for another grade on a shortage? The body is the same ceramic and the code is a sort, so the question is only how much window the circuit can absorb. At 620 pF the M window is 124 pF, the next grade tighter is K at 10 percent and the next grade looser is nothing, M is the widest code in the table. At 500 MHz that window moves the reactance between 0.43 ohm at 744 pF and 0.64 ohm at 496 pF, so on an impedance match or a filter the code has to be held, while on a bypass position it is invisible. We quote the code on the order and we state on the quotation the code we can actually ship, so the two never get mixed on the line.
How is the withstanding test set at 1000 V? The series rule steps down with voltage: 250 percent up to 500 V, 150 percent up to 1250 V, and 120 percent above that. At 1000 V the test is 1500 V for five seconds, and the life test applies 120 percent of the working voltage for 2000 hours at 125 degrees C, which is 1200 V. A 2500 V or 1500 V part therefore carries a smaller test multiple, not a weaker body, and the number to work against in a circuit is the working voltage rather than the test level.
What has to be on the certificate? Three things that a broker line often leaves off: the date code and the lot, the measured capacitance at 1 MHz with the test fixture stated, and the finish, because the tin and lead option is lead bearing and a restricted build cannot take it without a deviation. A 620 pF part at 1000 V also has to carry its sorting code on the paperwork, since the value alone does not tell the line which window arrived. This code has no packing letter, so the tray or reel decision has to be written on the order, and the count on the label has to match the count on the reel.
What to send with an enquiry
The enquiry is answered properly when it carries quantity, target date, the complete order code with its tolerance and termination letters, and the packing the line can take. Send the whole string and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the Date Code Management page sets out how date codes and lot numbers are recorded and shipped, and the Incoming Inspection Plan page sets out what is measured when a lot arrives.