100C3R9CW2500X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
100C3R9CW2500X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 100C3R9CW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 100C3R9CW2500X |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 100C3R9CW2500X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 100C3R9CW2500X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 100C3R9CW2500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
100C3R9CW2500X: 3.9 pF at 2500 V in the case C body
Every character in the string was fixed before the reel was booked. The string is a specification written in six fields: 100 for the series, C for the case, 3R9 for capacitance, C for plus or minus 0.25 pF, W for termination, 2500 for working voltage and X for marking, with packing left out of the code and read from the mechanical configuration table. The case is not cosmetic: the same capacitance in a different body is a different code and a different current rating.
Mechanically the part is 5.84 mm by 6.35 mm in the C case, plus 0.51 or minus 0.25 mm on one side and plus or minus 0.38 mm on the other, and electrically it is a porcelain multilayer chip built for radio frequency current rather than for capacitance per unit volume. That is why the data sheet answers the Q question with curves at 30, 150, 500 and 1000 MHz instead of a number, and why the current rating is a chart. The W suffix is a tin and lead finish over a nickel barrier, lead bearing, and the marking is laser.
| Series and case | 100C, case C, 5.84 mm by 6.35 mm, the .250 inch square body |
| Capacitance | 3.9 pF, code 3R9 |
| Tolerance | C, plus or minus 0.25 pF, a window of 0.25 pF around the marked value |
| Working voltage | 2500 VDC, 1768 V RMS at 0.707 times the DC rating |
| Withstanding voltage | 3000 V for five seconds, 120 percent of the working voltage |
| Life test | 2500 V for 2000 hours at 125 degrees C, 100 percent of the working voltage |
| Temperature coefficient | +90 plus or minus 30 ppm per degree C from minus 55 to plus 125 degrees C |
| Operating range | minus 55 to plus 125 degrees C with no derating of the working voltage |
| Insulation resistance | 10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, measured at a maximum of 500 VDC whatever the rating |
| Leakage floor | 25.0 nA at 2500 V at 25 degrees C and 250 nA at 125 degrees C, from the resistance floors |
| Stored energy | 12.2 microjoule at the working voltage, from one half C V squared |
| Reactance at 500 MHz | 81.6 ohm nominal |
| Series resonance | plotted against capacitance for the series; the part is inductive above it |
| Quality factor | ESR and Q curves at 30, 150, 500 and 1000 MHz |
| Termination | W, tin and lead solder plated over a nickel barrier, a lead bearing finish |
| Marking and packing | laser marking; no packaging letter on this code, so the packing is read from the mechanical configuration table, tape and reel or a tray of 180 pieces |
| Terminal strength | 10 lbs minimum, 20 lbs typical, for five seconds, MIL-STD-202 method 211 |
| Environmental schedule | thermal shock method 107 condition A, moisture resistance method 106, low voltage humidity method 103 at 1.5 VDC, 85 degrees C and 85 percent relative humidity for 240 hours |
| Stability | aging effects none, piezoelectric effects none, retrace and capacitance drift both under 0.02 percent or 0.02 pF, whichever is greater |
| Current rating basis | a 65 degrees C mounting surface with 15 degrees C per watt of thermal resistance, so 4 W of dissipation brings the case to 125 degrees C |
What 3.9 pF does from 30 MHz to 1 GHz
At 30 MHz this 3.9 pF body presents 1360.3 ohm, at 150 MHz 272.1 ohm, at 500 MHz 81.6 ohm and at 1 GHz 40.8 ohm. A body this small never becomes a short in the band, which is the whole point: 81.6 ohm at 500 MHz and 40.8 ohm at 1 GHz are impedances a match can be tuned with, not a return path. The circuit consequence is that the value, not the case, sets the behaviour, and the case is chosen for the current and voltage the stage puts through it.
Tolerance is easier to judge in reactance than in picofarads. At 500 MHz this 3.9 pF body presents 81.6 ohm. The C window of 0.25 pF moves that to 76.7 ohm at 4.15 pF and to 87.2 ohm at 3.65 pF, a spread of 10.5 ohm, which is 12.87 percent of the nominal reactance. Against a 50 ohm line the larger of those readings is 1.7 times the line impedance, so the window owns the whole match and the C code has to be held on a tuned stage.
A high Q porcelain body is bought for what it does to loss rather than for what it does to capacitance. At 3.9 pF and 500 MHz the reactance is 81.6 ohm, so a Q of a few hundred and an ESR of a fraction of an ohm put most of the loss in the metal rather than in the dielectric, and that is why the series is offered for plasma chambers, MRI coils and VHF and UHF power amplifiers. The same body in a bypass position is chosen for the current it can take, not for its Q.
Where a 3.9 pF case C part is chosen
Small values in this case size appear in plasma chambers, medical MRI coils and VHF and UHF power amplifiers, the three circuit applications the data sheet names, and in each of them the part is doing impedance work rather than bypass. On an MRI coil the value sets the resonance of a local element, so a 0.25 pF shift is a shift in the tuning of the coil rather than a small change in a filter skirt. On a plasma chamber match the same body is a series element in a network that has to hold at high voltage, which is why the 2500 V rating and the 120 percent withstanding test matter as much as the tolerance.
A 2500 V working voltage puts this part above the 1250 V break in the series rules. Five seconds at 3000 V is the withstanding test, 120 percent, and the life test at 125 degrees C runs 2000 hours at 100 percent, 2500 V. Both multiples are lower than a 500 V part carries, and that is the rule stepping down rather than a weaker body: the part at 2500 V is a higher voltage component, not a lower grade of the same one. At the rating this part leaks 25.0 nA at 25 degrees C and 250 nA at 125 degrees C, so on a 1 Mohm node that floor alone is 250 mV of offset at the higher temperature, and the bias network has to be able to absorb it.
Questions that arrive with a shortage quote
Can the C code be swapped for another grade on a shortage? Below 10 pF the table offers three absolute codes and nothing else, B at 0.1 pF, C at 0.25 pF and D at 0.5 pF, so a shortage cannot be eased into a percentage grade that the value does not carry. At 3.9 pF the C window is 0.25 pF, which is 6.41 percent of the marked value, and at 500 MHz it takes the reactance from 81.6 ohm at 3.9 pF to 76.7 ohm at 4.15 pF, 4.92 ohm of movement that the circuit either absorbs or does not. A bypass or a blocking position absorbs it; a match does not. We quote the code on the order and we state on the quotation the code we can actually ship, so the two never get mixed on the line.
How is the withstanding test set at 2500 V? The series rule steps down with voltage: 250 percent up to 500 V, 150 percent up to 1250 V, and 120 percent above that. At 2500 V the test is 3000 V for five seconds, and the life test applies 100 percent of the working voltage for 2000 hours at 125 degrees C, which is 2500 V. A 2500 V or 1500 V part therefore carries a smaller test multiple, not a weaker body, and the number to work against in a circuit is the working voltage rather than the test level.
What has to be on the certificate? Three things that a broker line often leaves off: the date code and the lot, the measured capacitance at 1 MHz with the test fixture stated, and the finish, because the tin and lead option is lead bearing and a restricted build cannot take it without a deviation. A 3.9 pF part at 2500 V also has to carry its sorting code on the paperwork, since the value alone does not tell the line which window arrived. This code has no packing letter, so the tray or reel decision has to be written on the order, and the count on the label has to match the count on the reel.
What to send with an enquiry
The enquiry is answered properly when it carries quantity, target date, the complete order code with its tolerance and termination letters, and the packing the line can take. Send the whole string and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the RF Procurement page sets out how the quotation is built and what is confirmed before a reel is booked, and the One Stop BOM Sourcing page sets out how a mixed bill is quoted line by line.