Contact Us

100C3R9BW2500X KYOCERA AVX RF Capacitor

Brand: ATC
The 100C3R9BW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

100C3R9BW2500X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 100C3R9BW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number100C3R9BW2500X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number100C3R9BW2500X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 100C3R9BW2500X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 100C3R9BW2500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

100C3R9BW2500X: 3.9 pF at 2500 V in the C case

Read the string from the left and every character is a decision that was made before the order. 100 is the porcelain Superchip series, C is the case, 3R9 is the capacitance code from the EIA system where the first two digits are the significant figures and the third is the number of zeros, B is the tolerance code at plus or minus 0.1 pF, W is the termination code, 2500 is the working voltage, X is laser marking, and the packing is set by the mechanical configuration table. The same capacitance in another case is a different order code, and the case change moves the current rating before it moves anything else.

The body is a high density porcelain multilayer chip in the C case, 5.84 mm by 6.35 mm, the .250 inch square body, built for high radio frequency current and voltage rather than for density. The data sheet gives no single Q line for this series, because the number moves with capacitance. It publishes Q and ESR as curves against capacitance at 30, 150, 500 and 1000 MHz, and those curves are what a high power stage is checked against. The W finish, tin and lead solder over a nickel barrier, is lead bearing, so a restricted build needs a deviation to use it. The marking is laser, so the value survives a solvent clean.

Series and case100C, case C, 5.84 mm by 6.35 mm, the .250 inch square body
Capacitance3.9 pF, code 3R9
ToleranceB, plus or minus 0.1 pF
Working voltage2500 VDC, 1768 V RMS at 0.707 times the DC rating
Withstanding voltage3000 V for five seconds, 120 percent of the working voltage
Temperature coefficient+90 plus or minus 30 ppm per degree C from minus 55 to plus 125 degrees C
Operating rangeminus 55 to plus 125 degrees C with no derating of the working voltage across the range
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, measured at a maximum of 500 VDC
Leakage floor25.0 nA at 2500 V at 25 degrees C and 250 nA at 125 degrees C, from the resistance floors
Stored energy12.2 microjoule at the working voltage, from one half C V squared
Quality factorESR and Q curves at 30, 150, 500 and 1000 MHz
TerminationW, tin and lead solder plated over a nickel barrier, a lead bearing finish
Marking and packinglaser marking; no packaging letter on this code, so the packing is read from the mechanical configuration table (tray of 180 pieces or tape and reel)
StabilityAging effects are none, piezoelectric effects are none, and retrace and capacitance drift are both quoted at less than plus or minus 0.02 percent or 0.02 pF, whichever is greater
Terminal strengtha pull of 10 lb minimum and 20 lb typical against the termination surface for five seconds, MIL-STD-202 method 211

What 3.9 pF does from 30 MHz to 1 GHz

The reactance arithmetic is the first filter on a part like this. At 30 MHz, 3.9 pF is 1.4 kohm; at 150 MHz it is 272 ohm; at 500 MHz it is 82 ohm; and at 1 GHz it is 41 ohm. The series publishes ESR and Q as curves against capacitance at 30, 150, 500 and 1000 MHz, so the loss for this value is read from the curve rather than from a single line, and the current rating is based on a 65 degrees C mounting surface and a device thermal resistance of 15 degrees C per watt, so 4 W of dissipation puts the case at 125 degrees C. That budget, not the capacitance, is what a 2500 V high power stage has to respect.

Reactance at 30 MHz1.4 kohm
Reactance at 150 MHz272 ohm
Reactance at 500 MHz82 ohm
Reactance at 1000 MHz41 ohm
Working voltage2500 VDC, 1768 V RMS

Where a 3.9 pF C case part is chosen

Between 2 pF and 20 pF the part works as a coupling and DC blocking element in a 1 GHz to 6 GHz chain, and as the shunt leg of a matching section on a power amplifier output. The reactance is low enough to pass the band and high enough to be a real part of the match, which is why the value is quoted to a tight code rather than a wide one. The B window here is plus or minus 0.1 pF, and in a cavity or printed filter the same value tunes the last resonator to the band edge, where that window moves the resonant frequency by a measurable amount.

Self resonance is the number that decides where this part stops being a capacitor. The data sheet lists high self resonance and low ESR and ESL as features rather than as a curve, so the practical check is arithmetic: a rule of thumb of about 1 nH per millimetre of land and trace puts 6.28 ohm of series reactance on a 1 mm connection at 1 GHz, against the 41 ohm ohm the 3.9 pF body itself presents at that frequency. Once the two are comparable the part reads as an inductor, and a shorter land or a via fence buys more bandwidth than a tighter capacitance code. That is also why the same value in a smaller case is not automatically the better part: the C case is 5.84 mm by 6.35 mm, and its land length is set by the body, not by the value.

Tolerance is easier to judge in reactance than in picofarads. At 500 MHz this 3.9 pF body presents 82 ohm. The B window of plus or minus 0.1 pF moves that to 84 ohm at 3.8 pF and to 80 ohm at 4 pF, a spread of 4.2 ohm, which is 5.13 percent of the nominal reactance. On a 50 ohm line the largest of those numbers is 1.68 of the line impedance, so the question a B code answers is how much of the match the sort window is allowed to own before the trim in production has to take it back out.

Questions that arrive with a shortage quote

Does the B tolerance code survive a temperature sweep? The code is a room temperature window of plus or minus 0.1 pF, which is 0.1 pF either side of 3.9 pF. The temperature coefficient of the series is plus or minus 30 ppm per degree C, so over the 100 degrees between 25 and 125 C the value moves by 0.0117 pF, and over the full 180 degree range by 0.0211 pF. The tolerance and the drift are therefore two separate lines in a tolerance analysis: the code is what the tester sorts to, and the drift is what the circuit keeps after the board is hot.

How is a 2500 V part tested if the meter stops at 500 V? The insulation resistance line in the data sheet is measured at a maximum test voltage of 500 VDC whatever the rating, so the leakage figure on the certificate is taken at a fifth of the working voltage here. The withstanding test is 120 percent of the working voltage, 3000 V for five seconds, and that one is done at full level. The life test applies 100 percent of the working voltage, 2500 V, for 2000 hours at 125 degrees C. A buyer who wants leakage data at the rated voltage has to ask for it as a special test, and it is not part of the standard release.

What has to be on the certificate? Three things that a broker line often leaves off: the date code and the lot, the measured capacitance at 1 MHz with the test fixture stated, and the finish, because the tin and lead option is lead bearing and a restricted build cannot take it without a deviation. This code carries no packing letter, so the tray or reel decision has to be written on the order. A reel that has been re-taped in a warehouse is not the same as one from the factory, and the count on the label has to match the count on the reel.

What to send with an enquiry

Four fields decide the price and the date: quantity, target date, the full order code with the tolerance and the termination letters, and the packing the line accepts. Send the whole string and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The RF Component Sourcing page sets out how a radio frequency bill is sourced and what a second source has to prove, the BOM Shortage Recovery page covers the second source route when the value is on allocation, and the One Stop BOM Sourcing page sets out the packing, kitting and inspection options a production line asks for.