Contact Us

ADM2587EBRWZ

Brand: Analog Devices
Analog Devices ADM2587EBRWZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADM2587EBRWZ — Analog & Mixed-Signal ICs | Superb Automation

ADM2587EBRWZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADM2587EBRWZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADM2587EBRWZ: isolated RS-485 with the isolated supply built in

The ADM2587EBRWZ is a signal and power isolated RS-485 transceiver in a 20-lead wide body SOIC. The isoPower stage transfers energy across the same transformer barrier that carries the data, so the bus side needs no separate isolated DC-DC converter. It runs at 500 kbps with 15 kV human body model protection on the bus pins and a 2500 V rms isolation rating.

Published values

ParameterValue
Functionsignal and power isolated RS-485 transceiver
Data rate500 kbps on this order code, 16 Mbps on the ADM2582E
Isolation test voltage2500 V rms for one minute
Working voltage524 V peak
ESD on bus pins15 kV human body model
Supply current72 mA at 5 V into 100 ohm, 90 mA at 3.3 V into 100 ohm
Common mode transient immunityabove 25 kV per microsecond
Isolated powerintegrated, no external converter
Package and range20-lead wide body SOIC, -40 C to +85 C

What integrated isolated power removes

The conventional isolated node needs a transformer driver, a transformer, a rectifier, a regulator and the transceiver, plus the creepage and clearance that all of those parts demand. The ADM2587E replaces that chain with one package and one barrier, which is a packaging decision as much as an electrical one: the isolated domain shrinks to the width of a 20-lead body.

The cost is a fixed switching frequency inside the package. That oscillator is the emission source the application note on radiated emissions from isoPower devices is written about, and the recommendation is stitched copper and a solid return under the package rather than a split.

72 mA at 5 V is the whole node

72 mA into a 100 ohm load at 5 V is 360 mW, and that figure includes the isolated supply, the driver and the receiver. A discrete solution with a transformer driver and a regulator is not necessarily worse, but its losses are spread across four parts and are much harder to predict at the quotation stage.

The 3.3 V figure of 90 mA is higher because the same delivered power comes from a lower rail. That is the number that matters when the logic side is a 3.3 V system and the isolated domain is derived from it.

500 kbps against 16 Mbps in the same package

The ADM2582E shares the package and the isolation and runs at 16 Mbps, so the choice inside this family is speed against nothing else: the barrier, the ESD rating and the isolated power stage are the same. A 500 kbps part on a link that never exceeds 115 kbps is the normal choice because the slower edges are quieter.

The 524 V peak working voltage is the continuous rating behind the 2500 V rms test, so the part suits a 400 V system and not a 690 V one. On a drive with a higher DC bus the reinforced part with the 849 V peak rating is the one to quote.

Replacement checks

The 20-lead body is shared by two data rate options, and the 16-lead family members are a different footprint. A substitute has to match the isolated power requirement first, because a 16-lead part without it needs a converter that the board may not have room for.

The pages below hold the family cross reference, the delivery options for a part on allocation and the vendor consolidation route.

Buyers usually arrive at the ADI second source page to find the family alternatives, then use component lead time solutions to confirm a substitute before it is fitted; vendor consolidation is the routine for a part that has already stopped shipping.

Two questions buyers ask

Does the ADM2587EBRWZ need an external isolated DC-DC? No. The isolated supply is generated inside the package by the isoPower stage, which is the reason for the 20-lead body and the 72 mA supply current.

Can two of these sit on the same isolated domain? Each part generates its own isolated rail, so two parts on one domain put two switching sources on the same copper. That is a return path question, not a functional limit.