Contact Us

AD7923BRUZ

Brand: Analog Devices
Analog Devices AD7923BRUZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD7923BRUZ — Analog & Mixed-Signal ICs | Superb Automation

AD7923BRUZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD7923BRUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD7923BRUZ: 3.6 mW at 200 kSPS Because the Conversion Follows the Serial Clock

The AD7923 is a four channel, 12 bit successive approximation converter with a 200 kSPS throughput rate, a 2.7 V to 5.25 V supply and a maximum power of 3.6 mW at 200 kSPS on a 3 V rail, or 7.5 mW on 5 V. The conversion is clocked by the serial clock rather than by an internal oscillator, so the conversion time shrinks as the clock speeds up: 800 ns at a 20 MHz clock. That arrangement is what allows the part to draw current in proportion to the rate it is actually used at, rather than at the rate it could run.

Current proportional to throughput

At maximum throughput the part draws 1.2 mA maximum on 3 V and 1.5 mA maximum on 5 V. When the serial clock is stopped between conversions, the part goes into a shutdown state that draws 0.5 uA, so a system that samples at 1 kSPS instead of 200 kSPS draws about 1 percent of the full rate current. In a battery instrument that difference is the whole power budget. The catch is that the wake up from full shutdown takes time and the first conversion after it must be discarded, so the part is normally put in a partial shutdown, not a full one, between bursts.

Two input ranges on the same pin

The analog input range is either zero to the reference or zero to twice the reference, selected by a control register bit. With a 2.5 V reference the two ranges are 0 to 2.5 V and 0 to 5 V, which is a factor of two in resolution for a signal that fills the larger range. A 5 V sensor signal on the 0 to 2.5 V setting saturates, and a 1 V signal on the larger setting loses a bit of resolution, so the range has to be chosen against the signal rather than against the rail.

ParameterValueWhat it decides
Resolution12 bit610 uV per code on a 2.5 V range
Throughput200 kSPS5 us per conversion at the maximum rate
Supply2.7 V to 5.25 VRuns from a 3 V or a 5 V rail
Power at 200 kSPS3.6 mW on 3 V, 7.5 mW on 5 VMaximum, not typical
Current at the maximum rate1.2 mA on 3 V, 1.5 mA on 5 VSets the decoupling and the rail sizing
Shutdown current0.5 uA maximumThree decades below the active state
Conversion time800 ns at 20 MHz clockThe clock sets the conversion, not a timer
Signal to noise70 dB minimum at 50 kHz11.3 effective bits at that input frequency
Input bandwidthAbove 8 MHz track and holdUndersampling is possible
ChannelsFour single ended with a sequencerA scan without a processor per channel
Interface supplyVDRIVE, 3 V or 5 VTalks to a 3 V processor from a 5 V rail
Pipeline delayNoneThe result belongs to the sample just taken
Package16-lead TSSOPAn eight channel part in a 16-lead body

No pipeline delay and what it saves

A converter with a pipeline delay returns the result of a sample taken one or more conversions earlier. That is harmless in a fixed rate scan and awkward in a control loop, because the delay has to be carried in the loop model. This part returns the result of the conversion just made, so the loop sees the sample it asked for. In a current control loop running at 50 kHz, one conversion of pipeline delay is 20 us, which at a 1 kHz loop crossover is 7 percent of the phase margin.

The sequencer and the scan

The four inputs can be scanned in a preprogrammed order, with the sequence held in a register and repeated, so the processor reads four results per frame without writing a channel address each time. The sequencer can also be set to a shorter sequence, which is how a two channel system gets twice the per channel rate. The first result after a sequence change belongs to the old sequence unless the part is allowed to settle, and the data sheet's timing section covers that case.

Buying a low power converter for a battery instrument

The numbers to compare are power at the intended rate, not at the maximum rate, and the shutdown current, because a converter that is only 3.6 mW at full speed can still dominate a 1 kSPS system if its idle current is high. The order code carries the package and the grade. Availability is tracked through ADC DAC cross reference, and the wider question of a low power analog front end is set out in medical device components. Where a short part forces a change, the checks are in how to verify a drop in replacement.