Contact Us

AD790JRZ

Brand: Analog Devices
Analog Devices AD790JRZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD790JRZ — Analog & Mixed-Signal ICs | Superb Automation

AD790JRZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD790JRZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD790JRZ: A 45 ns Comparator That Still Settles to 250 uV

The AD790JRZ is the commercial grade of a comparator that does not have to trade precision for speed. The propagation delay is 45 ns maximum with 5 mV of overdrive, and the input offset sits at 250 uV maximum, so a threshold detector built around it does not need a trim for most industrial work. Two more numbers decide whether it fits a given board. The first is the 500 uV of internal hysteresis, which stops the output from chattering when a slow signal crosses the threshold. The second is the 15 V maximum differential input voltage in dual supply operation, which is far wider than the supply rails themselves and lets the part look directly at a signal several volts outside the rails without a clamp network. Power dissipation is 60 mW, and the output stage swings between the logic supply pin and ground, so it talks to CMOS or TTL logic without a level shifter.

Published values

ParameterValue
Propagation delay45 ns maximum at 5 mV overdrive
Input offset voltage250 uV maximum
Input hysteresis500 uV maximum, internal
Differential input range15 V maximum, dual supply mode
SupplySingle 5 V or dual plus and minus 15 V
Output logicCMOS or TTL, referred to the VLOGIC pin
LatchOn board, TTL level control
Power dissipation60 mW
Bodies8-lead plastic DIP and cerdip, 8-lead SOIC for the R suffix
Tape and reelAvailable to EIA-481A

The single supply case is the one people get wrong

On a single 5 V rail the input common mode range includes ground, which is unusual for a part of this age and is the reason the device shows up in zero crossing detectors and in the front end of discrete successive approximation converters. What changes on a single supply is the output. The VLOGIC pin must be tied to the logic rail of the receiving device, and if it is left floating or tied to the analog rail while the receiver runs at 3.3 V, the part still works but the output high level sits at the wrong voltage for the receiver. Boards that were laid out for the older 15 V dual supply world often leave that pin connected to +5 V and then wonder why a 3.3 V microcontroller sees a marginal high. Tying VLOGIC to the microcontroller rail fixes it without any other change.

Why hysteresis changes the input network

Internal hysteresis means the threshold moves by 500 uV between the rising and falling transitions. That is enough to stop oscillation on a noisy or slow slope, and it also means the effective threshold for a rising edge is not the same as for a falling edge. In a pulse width modulator or a precision rectifier this appears as a small duty cycle offset that no amount of offset trimming removes. If the application needs a single defined threshold, the hysteresis has to be accounted for in the threshold resistor divider rather than removed. The alternative is an external positive feedback network around a comparator without internal hysteresis, which brings back the oscillation problem the AD790 avoids.

Latch, glitch and the supply sequencing detail

The on board latch holds the output state at the moment the latch pin is driven high, which is how the part is used as a track and hold element in front of a converter or as a pulse width sampler. The data sheet is explicit that the latch input must be driven from a logic source that reaches the specified levels, because a slow ramp on that pin can put the internal stage in an indeterminate state for the duration of the ramp. In a system where the analog rails come up before the logic rail, the latch pin is the pin that decides whether the output starts in a known state. Adding a pull up or pull down that matches the intended default state costs one resistor and removes the ambiguity.

Replacing a comparator in a mature assembly

Comparators are the part most often left on a bill of materials after the rest of the board has been respun, and the AD790 is old enough that the J grade shows up as a broker item rather than a catalog line. The offsets and the 45 ns figure are shared across the grades, so a grade change is usually safe where the temperature window is commercial, and the body is the thing to check, because the 8-lead DIP and the SOIC are not interchangeable on a finished board. The amplifier cross reference page groups the comparator and op amp families we hold by function and pinout, the ADI part second source page covers the grades that are genuinely equivalent, and the lead time page shows what is on the shelf for a build that has to ship this quarter.