Contact Us

AD7714ARS-5

Brand: Analog Devices
Analog Devices AD7714ARS-5 is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD7714ARS-5 — Analog & Mixed-Signal ICs | Superb Automation

AD7714ARS-5

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD7714ARS-5 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD7714ARS-5: The Same 24-Bit Front End in a 28-Lead SSOP, and the Temperature Grade Trap Behind It

The AD7714ARS-5 is the surface mount member of the AD7714 pair: same converter, same programmable gain front end, same 5 V supply, but in a 28-lead shrink small outline package instead of the 24-pin dual in line body. The two order codes are not footprint interchangeable, and the difference in lead count is the first thing to check before a part is moved from one assembly to the other. Both are specified from minus 40 C to plus 85 C, and both deliver 24 bits with no missing codes, 0.0015 percent nonlinearity, three differential or five pseudo differential inputs and a gain range of 1 to 128.

Package choice is an assembly and thermal decision

A 24-pin 0.3 inch dual in line part and a 28-lead SSOP differ in more than outline. The through hole body dissipates heat into a socket and the surrounding board through its leads, which is forgiving in a hot enclosure but occupies far more area. The SSOP puts the die on a much smaller footprint with a shorter thermal path to the copper underneath, which is better for a dense board and worse for anyone expecting to replace the part in the field. For a loop powered instrument that is potted or conformally coated, the surface mount body is the only practical choice; for a bench instrument that is repaired, the socket wins.

The temperature grade that the supply voltage decides

Inside this family the temperature range is attached to the supply version, not to the package. The 5 V codes, including this one, are specified to plus 85 C. The 3 V codes in the dual in line and small outline bodies are specified to plus 105 C, while the 3 V SSOP stops at plus 85 C. A product that needs a 105 C ambient and picks the 5 V part for its wider input range will fail the temperature requirement, and a product that needs 105 C can only get it from the 3 V part in the larger bodies. That is a selection question to settle before the drawing is released, not after the first thermal chamber run.

ParameterValue on this order codeWhat it decides
Resolution24 bits, no missing codesNo code gaps in the transfer function
Nonlinearity0.0015 percentAbout 393 codes at 24 bits
InputsThree differential or five pseudo differentialFive channels from six analogue pins
Gain1 to 128Direct connection to a bridge or a thermocouple
Supply5 V nominalWider input range, plus 85 C ceiling
Current350 uA typical, 5 uA in power-down1.75 mW running, 25 uW standby at 5 V
Package28-lead SSOPNot the 24-pin DIP footprint
TemperatureMinus 40 C to plus 85 CThe 3 V DIP and SOIC grades reach plus 105 C
InterfaceThree wire serial, SPI and MICROWIRE compatibleAny microcontroller with a shift port
CalibrationSelf, system and backgroundField correction without a trim pot

The Y grade is a different part with the same name

The AD7714Y is not a temperature suffix. It is a distinct grade with a wider supply window of 2.7 V to 3.3 V or 4.75 V to 5.25 V, a tighter linearity of 0.0010 percent, a lower current of 226 uA typical with 4 uA in power-down, Schmitt triggers on the clock and data inputs, and availability in a 24-lead TSSOP. For a board fed from a lithium cell or a 3.3 V rail, the Y grade is the one that works across the full battery range, and the Schmitt triggers are what keep the serial port reliable when the clock line is long. Quoting the plain part number and expecting Y grade behaviour is a common procurement error, because the two carry different order codes and different prices.

Where the front end stops and the system begins

The converter removes the instrumentation amplifier, the filter and the reference divider from the analogue chain, but two things still belong to the board: the reference and the input protection. A differential reference input lets the bridge excitation serve as the reference so its drift cancels, which is only true if the same trace feeds both and the drop along it is accounted for. The inputs must not go within 500 mV of the analogue supply on the 5 V part, so a signal that can float above the rail needs a clamp, and a transducer that can be disconnected needs a bias path so the input does not drift to a rail and saturate the modulator.

This converter is used in portable instruments, weigh scales and pressure transmitters where the signal is small and slow. Where a build needs a surface mount body, a lower supply or a tighter linearity grade, the ADC and DAC cross reference page lists the family members and their differences, the how to verify a drop in replacement page covers the checks before a package change is approved, and the incoming inspection plan page covers what to test on receipt for parts of this class.