Contact Us

AD7476ARTZ-500RL7

Brand: Analog Devices
Analog Devices AD7476ARTZ-500RL7 is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD7476ARTZ-500RL7 — Analog & Mixed-Signal ICs | Superb Automation

AD7476ARTZ-500RL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD7476ARTZ-500RL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD7476ARTZ-500RL7: 12 Bits at 1 MSPS in a Six Pin SOT-23

The AD7476ARTZ-500RL7 is the 12 bit member of a three part family that shares a package and a pinout, with 10 and 8 bit versions alongside it. Throughput is 1 MSPS, the supply range is 2.35 V to 5.25 V, and the part draws 3.6 mW at 1 MSPS on a 3 V supply or 15 mW on a 5 V supply. Signal to noise ratio is 70 dB at a 100 kHz input, there is no pipeline delay so the result of a conversion is available in the same frame as the request, and standby current is 1 uA maximum. The package is a 6-lead SOT-23, and the ordering suffix on this part means a 500 piece reel.

Published values

ParameterValue
Resolution12 bits, family also has 10 and 8 bit members
Throughput1 MSPS
Supply2.35 V to 5.25 V
Power3.6 mW at 1 MSPS on 3 V, 15 mW on 5 V
Signal to noise70 dB at 100 kHz input
Input bandwidthWideband, successive approximation architecture
Pipeline delayNone
Standby current1 uA maximum
InterfaceSerial, SPI, QSPI, MICROWIRE and DSP compatible
Body6-lead SOT-23

No pipeline delay means the timing stays simple

A successive approximation converter without pipeline delay returns the result of the current conversion before the next one starts, so the host does not have to track a latency counter. That matters in a control loop that closes on the measurement, where a pipeline delay of even a few samples changes the loop stability. It also simplifies a multiplexed front end, because the channel that was just converted is unambiguous. The trade off is that the conversion time is the throughput limit, so the interface clock rate has to be fast enough to shift the result out inside the frame.

Power scales with throughput, not with the rail alone

The 3.6 mW figure at 1 MSPS on 3 V is a throughput dependent number: the part's current scales with the conversion rate, so running at 100 kSPS costs roughly a tenth of the power. In a battery instrument that samples in bursts, the average power is set by the duty cycle rather than by the headline figure, and the standby current of 1 uA makes the parked state essentially free. The practical consequence is that the converter can be left in standby between bursts and woken for each measurement, with the wake up time being the only constraint.

Driving the input from a real source

At 1 MSPS the sampling switch draws a charge packet at every conversion, and the source has to settle from that disturbance within the acquisition window. A source with more than a few hundred ohms of resistance, or a long trace with inductance, will not settle and the result is a gain error that grows with source impedance. A buffer amplifier or a small series resistor with a local capacitor is the usual answer, and the capacitor has to be chosen so the sampling charge does not move the voltage beyond half an LSB at 12 bits. The 6-lead package has no separate reference pin, so the reference is the supply and the same decoupling serves both.

Family substitution and reel sizes

The 8, 10 and 12 bit members share a pinout, so a board can move between resolutions without a change, and the resolution is set by the part number rather than by a configuration pin. Reel size matters more than it looks: a 500 piece reel suits a pilot build while a production line wants the larger reel, and a mismatch means a line stoppage that has nothing to do with the silicon. The converter cross reference page lists the family by resolution and reel, the pin to pin cross reference page shows which members swap directly, and the lead time page covers reel quantities on the shelf.