5962R0820102VZA
Product Specifications
5962R0820102VZA
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The 5962R0820102VZA from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
5962R0820102VZA: the aerospace AD768S, and what the drawing number does and does not tell you
5962R0820102VZA is the order code under Standard Microcircuit Drawing 5962-08201 for the AD768S, the aerospace version of the AD768 16-bit 30 MSPS digital to analog converter in a 28-lead flatpack. The converter inside is the same current steering core as the commercial part, and the difference a buyer is paying for is the screening, the flatpack body and the traceability, not a different silicon performance.
Published values
| Parameter | Value |
|---|---|
| Resolution | 16 bit |
| Update rate | 30 MSPS, 40 MSPS stated as the ceiling |
| Linearity | 1/2 LSB DNL and 1 LSB INL at 14 bit |
| Settling | 25 ns full scale to 0.025% |
| Full scale output current | 20 mA nominal |
| Output impedance | 1 kohm |
| Reference | 2.5 V bandgap on chip, external reference possible |
| SFDR at 1 MHz output | 86 dBc |
| THD at 1 MHz output | 71 dBc |
| Glitch impulse | 35 pV-s |
| Supplies | +/-5 V |
| Power | 465 mW typical |
| Package | 28-lead flatpack |
| Drawing | SMD 5962-08201, part 5962R0820102VZA |
Reading a standard microcircuit drawing
A 5962 number is a drawing, not a part description. The first block identifies the drawing family, the suffix identifies the device type and the screening level, and the last letters identify the package. Two order codes that differ only in the middle block can be the same die at two different screening flows, and the price difference between them is usually larger than the performance difference.
For a programme that is being bought against a drawing, the drawing is the requirement and the vendor datasheet is supporting information. A substitution that improves a parameter but moves off the drawing is not a substitution the customer can accept, which is why these parts are quoted against the drawing number rather than against a generic description.
The 25 ns settling and the 30 MSPS rating
25 ns to 0.025% is 40 MSPS by arithmetic, and the datasheet states the part supports update rates up to 40 MSPS while the headline rating is 30 MSPS. At 30 MSPS the period is 33.3 ns, so the settling window leaves about 8 ns for the latch and the clock skew, which is the margin a waveform reconstruction application actually needs.
The settling figure is full scale, which is the worst case transition. A small step settles faster, so a synthesised waveform that only uses part of the range runs faster than the full scale number suggests, and the digital input pattern is what decides how often the worst case is exercised.
Current output into a real load
The output is a differential current pair of 20 mA nominal with a 1 kohm output impedance. Into a 50 ohm load that is 1 V peak, and into a 25 ohm load it is 0.5 V peak, so the full scale voltage is set by the termination rather than by the converter. A board that wants 2 V peak to peak needs an amplifier or a transformer, and the datasheet's interface sections show both.
The 1 kohm output impedance is high enough that the load dominates the parallel combination, which is what makes the output current nearly independent of the load. It is also why the output can be taken into a virtual ground without a large error, and why the settle time depends on the load capacitance and the amplifier's loop rather than on the converter alone.
Power, thermal and the flatpack
465 mW from +/-5 V is about 46.5 mA in total, split between the core and the output current. The 28-lead flatpack has no exposed pad and its thermal path is the leads, so the package sits on a board with a ground plane under it and the leads are the heatsink. At 465 mW that is adequate in still air, and a programme that stacks boards in a sealed unit should still check the local ambient.
The flatpack also sets the assembly route. It is a leaded ceramic package, so the solder joint is formed on a gull wing lead rather than under a ball, and the inspection is visual. For aerospace assemblies that is often the reason the flatpack is chosen in the first place.
Radiation and reliability data
The vendor publishes a high dose rate radiation report and a single event effects report for this part, both dated 2015, next to the drawing. A programme that needs those numbers should obtain the reports and read them against its own environment rather than treat the R in the drawing number as a statement of tolerance.
The part is listed by the vendor as in production, with a list price at the one thousand piece level in the four figure dollar range. At that price the screening flow is most of the cost, and a quotation should state the screening level explicitly so that the buyer is not comparing two different flows.
For a board that has to keep running while a reel runs out, defense grade components is where the family alternatives sit, the obsolete part cross reference hub is the check list before a substitute goes in, and OEM procurement is how a gap is covered without a new line item.
Two questions buyers ask
Is 5962R0820102VZA the same converter as the commercial AD768? The converter core, resolution and speed are the same family: 16 bit, 30 MSPS, 20 mA current output. The package, the screening flow and the drawing control are different, and the drawing is the requirement for a programme buying against it.
What supply does the part need? Plus and minus 5 V, with 465 mW typical dissipation. The on-chip reference is 2.5 V and an external reference can be used instead through the reference input resistor.