Contact Us

Technical Articles

Inverter PCB Assembly Buyer's Guide — EV Power Electronics

2026-06-25

The traction inverter is the single most power-dense electronic assembly in an electric vehicle. It converts DC battery voltage to three-phase AC to drive the motor — switching hundreds of amps at hundreds of volts, tens of thousands of times per second. A single solder joint defect on a power stage PCB can cascade into field failure, warranty recall, or safety incident. This guide covers the six factors procurement teams should evaluate when selecting an inverter PCBA supplier: copper weight and current handling, substrate and thermal management, power semiconductor assembly, cleanliness and partial discharge, test and validation, and traceability.

view detail

Advanced HDI PCB · SiP · mSAP — High-Density Interconnect Solutions

2026-06-25

Advanced HDI (High-Density Interconnect) extends beyond standard multi-layer PCB fabrication by incorporating laser-drilled micro-vias, sequential lamination build-up layers, and fine-line trace/space geometries below 4/4 mil. Where a standard through-hole multilayer board connects every layer with mechanically drilled vias that span the entire board thickness, HDI uses blind and buried micro-vias that connect only the layers they need to — freeing routing space on other layers and enabling denser component placement. At Superb Automation, advanced HDI PCBs are fabricated to customer Gerber and stackup files. The fabrication process — micro-via laser drilling, sequential lamination registration, fine-line LDI imaging and etching — is tuned per build based on the customer's via stack definition and design rules.

view detail