Contact Us

TPSM86837RCGR

Brand: Texas Instruments
Texas Instruments TPSM86837RCGR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPSM86837RCGR — Power Management & Signal Chain | Superb Automation

TPSM86837RCGR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPSM86837RCGR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPSM86837RCGR: 8 A at 5.5 V out from a 24 V bus, with the light load efficiency kept

The TPSM86837RCGR is the Eco-mode member of an 8 A module family that takes 4.5 V to 28 V in and delivers 0.6 V to 5.5 V out. It shares the 19 pin B3QFN HotRod body with the 6 A family, 5.0 mm by 5.5 mm, and shares the selectable 800 kHz and 1200 kHz switching frequency, the capacitor programmed soft start, the output discharge and the non-latching protection set. What the 837 adds over the forced continuous 838 is pulse skipping at light load: the quiescent current is 45 microamps with the output in regulation, which matters on a 24 V industrial node that stays powered while the load drops to a few milliamps overnight.

The 8 A rating applies across the 0.6 V to 5.5 V output window, and the 98 percent maximum duty cycle means the module still regulates when a 5 V rail runs from a 5.5 V bus. The reference is 0.6 V at 1 percent from 25 C, the junction is specified to 150 C, and the enable threshold and the UVLO sit at 4.2 V wake with 550 mV of hysteresis, so a 5 V bus is above the lockout by only 0.8 V and a deep sag during a motor start can still trip it.

Key electrical data for the TPSM86837RCGR

Input range4.5 V to 28 V, UVLO wake 4.2 V typical, 550 mV hysteresis, 3 microamps shutdown
Output0.6 V to 5.5 V adjustable, 0.6 V reference at 1 percent from 25 C
Current8 A continuous, 98 percent maximum duty cycle
Switching800 kHz or 1200 kHz selected by the mode pin at start-up
Quiescent45 microamps no load in Eco-mode, soft start set by an external capacitor
ProtectionNon-latching OV, UV, OC, OT and UVLO, power good, output discharge

Package, marking and reel data

BodyRCG, 19 pin B3QFN HotRod, 5.00 mm by 5.50 mm
Reel1000 pieces on a 330 mm reel, 16.4 mm carrier, pocket 5.28 by 5.78 by 4.28 mm
FinishNIPDAU, level 3 at 250 C peak, 168 hour floor life
GradeJunction -40 C to 150 C, applications listed as medical, factory automation, test and measurement

The thermal path decides the usable current

At 24 V in and 5 V out with 8 A, the module dissipates roughly 2 W, and almost all of it leaves through the thermal pad into the board. A four layer board with a solid ground plane, nine thermal vias under the pad and 150 mm squared of copper on the bottom layer holds the junction near 110 C in a 60 C ambient, which leaves 40 C of margin against the 150 C rating. A two layer board with 50 mm squared of copper does not, and the part will fold back on thermal shutdown under a sustained 8 A load.

The second thermal input is the switching frequency. At 800 kHz the switching loss falls and the ripple rises, at 1200 kHz the reverse is true. For an 8 A load on a 5 V rail, 800 kHz plus a 1.5 microhenry inductor gives 1.8 A of ripple, which is 22 percent of the load and is acceptable for a rail feeding a motor drive or a solenoid bank. A rail feeding an ADC should run 1200 kHz with a larger output capacitor instead. Our power management cross reference page lists the codes we hold in this current class.

Buyer questions on the TPSM86837RCGR

Is the 837 a drop-in for the 838? Electrically and mechanically yes, both are the same RCG body with the same pinout. The difference is the light load behaviour, so a rail that needs flat ripple at 5 mA should take the 838 and a rail that needs standby efficiency should take the 837.

What reel size does this ship on? 1000 pieces on a 330 mm reel with a 16.4 mm carrier. That is smaller than the 3000 piece reels used by the 1 A and 3 A modules, so a line that runs one reel per shift will change reels more often.

Can the output be trimmed to 5.2 V? Yes, the feedback pin is brought out and a resistor pair sets any voltage inside the 0.6 V to 5.5 V window. The internal divider is not used on this member.

Availability and cross reference

The 250 C reflow rating and the level 3 moisture class are the two handling notes that travel with this body. A reel opened for a partial build has 168 hours of floor life before it needs a bake, and the label rather than the part number is what records that. We hold the 837 and the 838 against the same forecast line, and our safety stock planning page describes how the two codes are buffered when a customer's build splits between them.