Contact Us

TPS7A2501DRVR

Brand: Texas Instruments
Texas Instruments TPS7A2501DRVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS7A2501DRVR — Power Management & Signal Chain | Superb Automation

TPS7A2501DRVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS7A2501DRVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS7A2501DRVR: the adjustable 18 V member with a power good flag

The TPS7A2501DRVR is the adjustable output of the TPS7A25 family, a 300 mA regulator that takes 2.4 V to 18 V at the input and sets its output from 1.24 V to 17.66 V through an external divider. The 01 in the code marks the adjustable version, the DRV is the six pin WSON body at 2 mm by 2 mm, and the parts ship 3000 to a large reel with the marking 7A25.

What separates this family from the TPS7A24 line is the open drain power good output and the tighter accuracy: 1 percent over temperature against 1.25 percent. The power good flag can be pulled to a rail other than the output, so a 1.8 V logic input can monitor a 12 V derived rail without a level shifter. The feedback reference is 1.24 V with a window of 1.228 V to 1.252 V, and the divider has to draw enough current to stay above the leakage on the feedback pin.

Key electrical data for the adjustable member

Input range2.4 V to 18 V, with undervoltage lockout rising at 2.15 V and falling at 2.09 V
Output range1.24 V to 17.66 V adjustable, 300 mA maximum
Quiescent current2 uA typical, 4.5 uA maximum, 600 nA in shutdown
Accuracy1 percent over the full minus 40 to 125 C junction range
Dropout at 300 mA340 mV maximum across 50 mA, 150 mA and 300 mA load points
Current limit210 mA to 720 mA window, with thermal shutdown at 165 C
Power good93 percent rising and 84 to 90 percent falling, 3 percent of hysteresis

Package, marking and reel data

BodyWSON DRV, 6 pins, 2 mm by 2 mm, exposed pad
Reel3000 pieces, large tape and reel, 178 mm carrier, 8 mm tape
FinishNIPDAU, moisture level 1, 260 C peak reflow
Marking7A25
Feedback1.24 V reference, 1.228 V to 1.252 V window, 10 nA of input current

Where an adjustable 18 V rail belongs

Adjustable outputs are chosen when the rail is derived from a bus that varies: a 12 V or 15 V appliance supply, a 24 V industrial rail with a clamp, or a multi cell battery pack that runs from 18 V down to 10 V. The divider sets the output to whatever the circuit needs, and the power good flag tells the processor when the rail is actually valid rather than when the enable was asserted, which removes a class of start up fault.

The power good threshold is a detail worth reading. It asserts at 93 percent of the output rising and releases between 84 and 90 percent falling, so the hysteresis is several percent wide. A product that uses the flag as a brown out indicator should confirm that the rail's own tolerance does not sit inside that window, otherwise the flag can chatter at the bottom of the regulation range. The flag is open drain, so the pull up can be to a rail that is always present, which keeps the monitor alive when the output is off.

Buyer questions on the adjustable code

What value should the divider be? The reference is 1.24 V, so the upper resistor over the lower one equals the output over 1.24 V minus one. The divider should draw at least 10 uA so that the 10 nA of feedback current does not shift the ratio.

How is dropout specified at 300 mA? The data sheet gives a maximum of 340 mV across three load points and states that the figure is measured with the input at 97 percent of the output, and that it is not measured for fixed outputs below 2.5 V.

Can the power good pin drive 1.8 V logic directly? Yes, because it is open drain. The pull up sets the logic level, so a 1.8 V rail can monitor a much higher output without any level shifting.

Buying an adjustable regulator

Adjustable parts are sensitive to the divider rather than the part, so a substitution usually needs the reference window compared rather than the headline voltage. Power management cross reference lists the alternatives by reference voltage, and BOM consolidation covers reducing the number of trims a board holds.

The undervoltage lockout is worth checking against the input rail: it rises at 2.15 V and falls at 2.09 V, so a 2.4 V minimum input has margin, but a battery that sags below 2.1 V will drop the output rather than let it follow. The feedback pin draws 10 nA, the reference window is 1.228 V to 1.252 V, and the power good flag is open drain with a 93 percent rising threshold and 84 to 90 percent falling, which is wide enough that a rail whose own tolerance sits inside that band can cause the flag to toggle.