Contact Us

TPS7A2425DBVR

Brand: Texas Instruments
Texas Instruments TPS7A2425DBVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS7A2425DBVR — Power Management & Signal Chain | Superb Automation

TPS7A2425DBVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS7A2425DBVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS7A2425DBVR: a 2.5 V, 200 mA regulator with a 2 uA quiescent current

The TPS7A2425DBVR is the 2.5 V fixed output of the TPS7A24 family, a 200 mA regulator that takes 2.4 V to 18 V at the input and draws 2 uA of quiescent current. The family exists for appliances that are connected to the mains but measured on standby power: smoke and heat detectors, thermostats, motion sensors, electricity and water meters, and battery packs for cordless tools. In those products the mains is present, the load is microamps, and a regulator that draws milliamps costs more in standby than the circuit it supplies.

The 2.5 V trim suits a microcontroller reference or an analog domain that has to stay accurate as the supply varies. The part holds 1.25 percent accuracy over temperature, uses a 1 uF output capacitor, and includes an active overshoot pulldown that keeps the rail from spiking when the load drops suddenly. It ships in the five pin SOT-23 body coded DBV on a 3000 piece reel.

Key electrical data for the 2.5 V point

Input range2.4 V to 18 V, which covers a 12 V or 15 V rail with margin for transients
Output current200 mA, current limit around 620 mA, thermal shutdown at 165 C
Quiescent current2 uA typical at no load, 4.5 uA maximum over temperature
Accuracy1.25 percent over the full minus 40 to 125 C junction range
Dropout at 200 mA250 mV maximum, measured with the input at 97 percent of the output
Rejection75 dB at 10 Hz, 70 dB at 100 Hz, 62 dB at 1 kHz
Noise300 uV RMS over 10 Hz to 100 kHz at 1.24 V output

Package, marking and reel data

BodySOT-23 DBV, 5 pins, 2.9 mm by 1.6 mm
Reel3000 pieces, large tape and reel, 180 mm carrier, 8 mm tape
FinishNIPDAU or SN depending on the addendum row
Moisturelevel 1, 260 C peak reflow
Marking1XKF

Where a 2.5 V, 2 uA rail belongs

The standby power argument is the main one. A smoke detector that has to run ten years from one battery or from a mains adapter with a small backup cell cannot afford a regulator that draws even 100 uA, because that alone would be nearly 9 mAh a year. Two microamps is 17 uAh a year, which disappears next to the self discharge of the cell.

The wide input is the second argument. An 18 V window means the part can hang directly on a 12 V or 15 V appliance rail without a pre regulator, and the 250 mV dropout at 200 mA means a 2.75 V input still regulates a 2.5 V rail. The thermal limit is reached quickly at high input, though: 12 V in and 200 mA out dissipates 1.9 W, so the useful load at that input is tens of milliamps, not the full rating. The data sheet is honest about this, and the part is intended for loads measured in microamps to a few milliamps.

Buyer questions on the 2.5 V code

Does the active overshoot pulldown affect normal operation? No. It only conducts when the output rises above the regulation point, which happens when a load is removed quickly. In steady state it draws nothing.

Is the 250 mV dropout figure valid across the range? It is the maximum at 200 mA, measured with the input at 97 percent of the output. Below 2.5 V output the family does not publish a dropout figure, so a lower rail should be treated as untested for that parameter.

What sets the accuracy over temperature? The internal reference and the trimmed divider, both specified over the full junction range rather than at 25 degrees only, which is why the 1.25 percent figure holds at the extremes.

Sourcing metering and appliance regulators

Metering programmes run for a decade, so the part has to survive several rounds of vendor change. Last time buy and LTB planning covers the end of life route, and safety stock planning sets out how much a programme should hold for a part with a long qualification cycle.

The active overshoot pulldown is the detail that separates this family from a plain low quiescent current regulator. When a load is removed quickly the output rises, and the pulldown conducts until it is back inside the regulation window, which keeps a microcontroller from seeing a spike above its absolute maximum. The current limit is around 620 mA, well above the 200 mA rating, and thermal shutdown sits at 165 degrees with a 145 degree reset. The wide input window means the part can hang on a 12 V appliance rail, but the dissipation at that input limits the useful load to tens of milliamps.