Contact Us

TPS7A0218PDQNR

Brand: Texas Instruments
Texas Instruments TPS7A0218PDQNR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS7A0218PDQNR — Power Management & Signal Chain | Superb Automation

TPS7A0218PDQNR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS7A0218PDQNR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS7A0218PDQNR: 1.8 V at 200 mA with a 25 nA idle current

The TPS7A0218PDQNR is the 1.8 V fixed member of the TPS7A02 family from Texas Instruments. It delivers 200 mA from an input between 1.5 V and 6.0 V, holds the output inside 1 percent at 25 degrees and 1.5 percent over the full temperature range, and draws 25 nanoamps of quiescent current when the load is off. The body is the four pin X2SON coded DQN at 1.0 mm by 1.0 mm, 3000 pieces per reel, marking F4, moisture level 1.

1.8 V is the voltage where this family is easiest to use. The dropout band for 1.8 V to 2.5 V is 400 mV maximum to 85 C and 450 mV maximum over the full range at 200 mA, so a 2.5 V or 3.0 V input runs the part at full current with margin, and the 1.5 V input floor never comes into play. That is the opposite of the 1.0 V member, which needs 1.85 V at full load for the same current.

Key electrical data for the 1.8 V point

Output voltage1.8 V fixed, plus or minus 1 percent at 25 C and 1.5 percent over -40 to 125 C
Output current200 mA continuous, current limit 240 mA to 750 mA
Input range1.5 V to 6.0 V, 2.25 V needed at 200 mA because of dropout
Quiescent current25 nA typical at 25 C, 46 nA maximum, 60 nA maximum to 85 C
Dropout400 mV maximum at 200 mA up to 85 C and 450 mV maximum over the full range
Rejection and noise55 dB at 1 kHz and 30 mA, 130 uV RMS at 0.8 V over 10 Hz to 100 kHz

Package, marking and reel data

BodyX2SON DQN, 4 pins, 1.0 mm by 1.0 mm
Reel3000 pieces, large tape and reel
Finish and moistureNIPDAU or NIPDAUAG, level 1, unlimited floor life
MarkingF4
Thermal resistance179.1 C per W junction to ambient in the four pin body

Where a 1.8 V nanopower rail fits

The family applications list reads like the inside of a battery powered instrument: wearables, thermostats, smoke and heat detectors, gas and water meters, glucose monitors, pulse oximeters, residential circuit breakers, security cameras and card readers. In all of them a 1.8 V rail at a few tens of milliamps feeds a microcontroller, a radio or a sensor, and the sleep current of the regulator is the number that decides whether the product meets its shelf life claim. Twenty five nanoamps is below the self discharge of most cells.

The transient behaviour is the other half of the story. The device is specified to settle a 1 mA to 50 mA step in under 10 microseconds with about 100 mV of undershoot, which is what allows a radio that wakes for a few milliseconds to run from the same rail as a microcontroller without a second bulk capacitor. The start up time depends on the voltage band, 750 to 1200 microseconds for outputs between 1.5 V and 3.0 V, so a sequencer has to allow for about a millisecond before it enables the next rail.

Thermally the small body is the constraint at higher input. At 179.1 C per W, 200 mA from 3.3 V to 1.8 V is 0.3 W and a 54 degree rise, which is acceptable on a board with copper under the part. From 5 V the same current is 0.64 W and a 115 degree rise, which is outside the 125 degree junction rating at any realistic ambient. A 1.8 V rail from a 5 V bus needs a switching stage in front of it.

Buyer questions on this order code

What input does 200 mA need at 1.8 V? 2.25 V, because the dropout is 450 mV maximum at full load over temperature. At light load the 1.5 V input floor governs instead, which is why the part runs from a single cell at low current.

Is the 25 nA figure valid in dropout? Yes, the data sheet specifies the ground current in dropout at 25 nA typical, measured with the input at 95 percent of the nominal output. That is the behaviour that keeps a nearly empty battery from draining faster at the end.

Does the output discharge when disabled? Yes. There is a 60 Ohm pulldown that discharges the output when the device is disabled, and the enable pin has a 500 kOhm smart pulldown so a floating enable does not turn the rail on.

Sourcing the TPS7A0218PDQNR through SUPERB

SUPERB quotes the 1.8 V trim in the DQN body with the marking and the moisture class stated, and confirms the reel label on receipt. Where a programme needs the same voltage in a SOT-23 body for hand assembly, the same family covers it and the quote names the alternative rather than substituting it silently.

The BOM shortage recovery page covers how a single line gets covered without changing the rest of the bill, and safety stock planning sets out the buffer we hold on parts with long reorder cycles. Send the quantity and the annual usage and the offer follows.