TPS79301DBVRG4Q1
Product Specifications
TPS79301DBVRG4Q1
Texas Instruments — Power Management & Signal Chain
Product Overview
The TPS79301DBVRG4Q1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TPS79301DBVRG4Q1: the adjustable 200 mA member of the TPS793 line
The TPS79301DBVRG4Q1 is the adjustable output member of the TPS793 family from Texas Instruments, a 200 mA low noise regulator whose output is set by an external divider from a 1.225 V reference and can sit anywhere between that reference and 5.5 V minus the dropout. It comes in the six pin SOT-23 body coded DBV, which is the version that carries the feedback pin, and it ships 3000 pieces per reel at moisture level 1 with the marking PGVI.
Two letters in this order code need reading before a quote is placed. The G4 suffix marks a lead finish variant, which in this family is the tin plated row rather than the nickel palladium gold row, and the Q1 suffix marks the automotive qualification. The revision of the family document we work from, SLVS348N, prints the industrial rows TPS79301DBVR and TPS79301DBVRG4 as active but does not print a Q1 row for this string in its addendum, so the automotive record has to be confirmed on the vendor product folder before a purchase order is released. That is a documentary gap, not a statement about the silicon.
Key electrical data for the adjustable member
| Output voltage | 1.225 V to 5.5 V minus dropout, set by an external divider |
| Reference | 1.225 V typical, 1.201 V to 1.25 V window, feedback pin current 1 uA |
| Output current | 200 mA continuous, current limit 285 mA to 600 mA on the legacy silicon |
| Input range | 2.7 V to 5.5 V, output plus headroom has to stay inside it |
| Quiescent current | 170 uA typical and 220 uA maximum on the legacy silicon, 250 and 1000 on the current one |
| Rejection and noise | 68 dB at 100 Hz and 200 mA, 70 dB at 10 kHz, 43 dB at 100 kHz, 33 uV RMS with 0.01 uF |
Package, marking and reel data
| Body | SOT-23 DBV, 6 pins, 2.90 mm by 1.60 mm, feedback pin on pin 5 |
| Reel | 3000 pieces, large tape and reel |
| Finish and moisture | tin on the G4 row, level 1, unlimited floor life |
| Marking | PGVI |
| Thermal resistance | 225.1 C per W on the legacy silicon, 171.7 C per W on the current silicon |
Where an adjustable 200 mA rail is the practical choice
The TPS793 line was written for radio and instrumentation supplies: the data sheet lists the same class of loads as the TPS791 and TPS792 families, with twice the current and a lower noise floor per milliamp. An adjustable member is chosen when one board has to serve several rail values, or when the rail has to be trimmed at test. The divider draws 1 uA from the reference pin on the legacy silicon, so a 10 kOhm to 100 kOhm pair keeps the error below the accuracy window without loading the reference, and the feed forward capacitor across the upper resistor is what preserves the transient response that the fixed members get from their internal network.
At 200 mA the thermal arithmetic is the constraint. From 5 V to 1.8 V the part absorbs 0.64 W, which on a 225 C per W six pin body is a 144 degree rise and outside the 125 degree junction rating unless the board carries copper under the pins. From 3.3 V to 1.8 V the figure drops to 0.3 W and a 68 degree rise, which is comfortable. A buyer who wants this part on a 5 V bus should either drop the input with a switching stage first or accept a lower current.
The noise and rejection numbers are the reason the part survives in new bills of material. With a 0.01 uF capacitor on the noise reduction pin the legacy silicon reaches 33 microvolt RMS from 100 Hz to 100 kHz and holds 68 dB of rejection at 100 Hz at full load, so a switching pre regulator at a few hundred kilohertz is attenuated by more than 40 dB before it reaches the analog rail. The current silicon gives 69 microvolts and 64 dB, which is the figure to use if the reel label carries the newer generation.
Buyer questions on this order code
Is the G4 suffix a silicon change? No. In this family G4 marks the lead finish row, and the electrical table is the same as the plain order code. The suffix is a finish and documentation question, and the certificate of conformance states which finish the reel carries.
Does the automotive qualification appear in the data sheet? Not in this revision. SLVS348N prints the plain and G4 rows as active and does not print a Q1 row for this string, so the automotive record is confirmed from the vendor product folder or the certificate rather than from the addendum.
Can the part regulate below 1.225 V? No. The reference is the floor. A lower rail needs a different device, and the power management cross reference page lists the parts we can compare on pin out and noise before any substitution is offered.
Sourcing the TPS79301DBVRG4Q1 through SUPERB
SUPERB quotes this order code with the finish and the silicon generation stated, because the G4 row and the plain row differ in finish and the legacy and current silicon differ in noise and quiescent current. The certificate of conformance and the reel label are checked on receipt, and the marking PGVI is verified against the offer before the parts enter stock.
Where the automotive record has to be documented, we quote against the vendor product folder and say so in the reply. The pin to pin cross reference page lists the related fixed voltage members, and sourcing audit trail sets out what paperwork travels with each shipment. Send the rail value and the quantity and the offer follows.