Contact Us

TPS74012DGKR

Brand: Texas Instruments
Texas Instruments TPS74012DGKR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS74012DGKR — Power Management & Signal Chain | Superb Automation

TPS74012DGKR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS74012DGKR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS74012DGKR 1.5 A regulator with a separate bias rail

The TPS74012DGKR is the fixed 1.2 V member of the TPS740xx family, a 1.5 A low dropout regulator in the eight pin VSSOP body, on a 2500 piece reel. What separates it from the other regulators in this band is the second supply pin. The main input runs from 1.2 V to 6.0 V, and a bias pin runs from 2.9 V to 6.0 V and feeds the error amplifier, the reference and the internal control circuits. That split is what allows a 1.2 V output from a 1.3 V input, which no single supply regulator of this class can do, because the gate of the pass device needs headroom that the main input no longer has.

The part is aimed at microprocessor and graphics processor rails, PC add in cards and post regulation behind a switching supply. The document is from 2011 and has not been revised since, and the vendor product folder still lists every orderable row as Active, so the part is old but not obsolete.

Key parameters from the SBVS091C document

Main input1.2 V to 6.0 V
Bias input2.9 V to 6.0 V, and the bias to output difference sets the dropout on that pin
Output1.2 V fixed on this member, adjustable members down to 0.9 V from a 0.9 V reference
Current1.5 A continuous, current limit 1.6 A minimum and 6.0 A maximum
AccuracyPlus or minus 1 percent at 25 degrees, plus or minus 2 percent over minus 40 to 125 degrees
Dropout on the main input100 mV typical and 300 mV maximum at 1.5 A
Dropout on the bias input1.3 V typical and 1.6 V maximum at 1.5 A with the main input tied to the bias
Ground current2 mA typical and 3 mA maximum at 1.5 A, which includes up to 2 mA of bias current
Output capacitorStable with any capacitor of 2.2 microfarad or larger, including tantalum and electrolytic
Thermal shutdown165 degrees rising and 140 degrees falling
PackageVSSOP eight pin, marking QXF, nickel palladium gold finish, level 2, one year floor life
Order codeTPS74012DGKR, 2500 pieces on a large reel, Active in the current addendum

The bias rail is not optional and not small

The bias pin draws up to 2 mA at full load, and the ground current figure of 3 mA maximum includes it. On a battery product that is a real budget item, and it is also the reason the part is not a candidate for a rail that has to run at a few microamp of quiescent current. The family was specified for processor rails that are always on when the board is on, so the current was traded for bandwidth and for the low dropout.

The bias to output difference is the constraint that catches people. The bias dropout is 1.3 V typical and 1.6 V maximum at 1.5 A, so a 1.2 V output needs at least 2.8 V on the bias pin to hold regulation over temperature, and the 2.9 V minimum in the table is consistent with that. A board that ties the bias pin to a 2.5 V rail and expects 1.5 A will see the regulator follow the input down rather than regulate, and the failure looks like a marginal rail rather than a supply that is out of specification.

The reel size reads backwards on this one

The addendum prints two rows for the VSSOP body of this member. The plain TPS74012DGKR row carries 2500 pieces on a large reel at level 2 with a one year floor life and marking QXF. The .A row of the same string carries 250 pieces on a small reel, which is the reverse of the usual pattern where the .A revision is the main production row. A buyer who orders the .A suffix to get the newer revision ends up with a prototype reel and a schedule for 250 parts.

For a production line the plain row is the one to name, and the quantity column should be read on the same row as the code rather than assumed. Where a customer wants the small reel for a pilot build, the .A row is the correct order and the price per piece will not reflect the volume.

Where this part fits

Microprocessor and graphics processor rails, PC add in cards, low voltage digital ICs and post regulation of a switching supply are the listed applications. Our notes for parts in this generation that are still Active but rarely stocked sit under safety stock planning, and the cross reference route for a rail that has to change part is under power management cross reference.

Before a purchase order

The thermal case at 1.5 A is the first thing to check. Dropping 1.8 V to 1.2 V at 1.5 A burns 0.9 W, and the VSSOP body on a modest copper area will run warm but inside its range. Dropping 3.3 V to 1.2 V at 1.5 A burns 3.15 W, which needs a copper area and airflow the small body does not get on a dense board. The part is a low dropout regulator, not a converter, and the input should be chosen with that in mind.

The second check is the output capacitor. The part is specified to be stable with any capacitor of 2.2 microfarad or more, which is unusual and useful on a board with legacy tantalum, and the transient response curves in the document are taken with 10 microfarad. A rail with a fast load step will show more droop with the minimum capacitor than the curves suggest.