Contact Us

TPS73701DRVR

Brand: Texas Instruments
Texas Instruments TPS73701DRVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS73701DRVR — Power Management & Signal Chain | Superb Automation

TPS73701DRVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS73701DRVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS73701DRVR adjustable 1 A regulator in the 2 mm by 2 mm WSON

The TPS73701DRVR is the same adjustable 1 A regulator as the SOT-223 member, in the six pin WSON body that measures 2 mm by 2 mm, on a 3000 piece reel with the marking QTN. It runs from 2.2 V to 5.5 V, sets its output from 1.20 V to 5.5 V with an external divider, holds 1 percent initial accuracy and is stable with a one microfarad ceramic output capacitor. The reason to choose this body over the larger one is board area on a dense point of load rail, and the reason not to is heat.

The WSON body carries an exposed pad and the thermal path runs through it. The document gives 67.2 degrees per watt junction to ambient for this body against 53.1 for the SOT-223 and 49.5 for the eight pin VSON, all measured on the same JEDEC high K board with a two by two thermal via array under the pad. That is a 27 percent higher thermal resistance than the SOT-223, which at 1 A of load is the difference between a workable rail and a derated one.

Key parameters from the SBVS067W document

Input range2.2 V to 5.5 V
Output range1.20 V to 5.5 V adjustable from a 1.204 V reference
Current1 A continuous, foldback current limit
Accuracy1 percent initial, 3 percent overall on the legacy silicon and 1.5 percent on the current silicon
Dropout130 mV typical at 1 A on the legacy silicon, 122 mV on the current silicon
Output capacitorStable with 1 microfarad ceramic or larger, any dielectric
Rejection58 dB at 100 Hz and 37 dB at 10 kHz at 1 A
Noise27 microvolt RMS over the 10 Hz to 100 kHz band at 3 V out
Reverse currentBlocked with the device disabled, with the adjustable member excepted when the feedback pin sits more than 1.0 V above the input
Thermal resistance67.2 degrees per watt junction to ambient in the DRV body, exposed pad tied through vias
PackageDRV six pin WSON, 2 mm by 2 mm, marking QTN
Order codeTPS73701DRVR, 3000 pieces on a large reel, nickel palladium gold finish, level 2, one year floor life

The via array under the pad is part of the specification

The thermal figure for this body is quoted with a two by two thermal via array under the exposed pad, at a 0.8 mm pitch because the pad is too small for the JEDEC standard array. That is stated in the document rather than implied, and it matters because a footprint that leaves the pad connected only to the top layer gives up most of the 67.2 degrees per watt. On a 1.2 V rail at 800 mA from a 1.8 V input the part burns 0.48 W, which is a 32 degree rise with the vias and considerably more without them.

The same document notes that the pad is ground. It is not a thermal only pad that can float. A footprint laid out by copying a generic six pin WSON land without connecting pin three and the pad will work on a bench at light load and fail on temperature in production, which is the kind of fault that only appears in a chamber.

Two bodies, one die, different reel labels

The addendum for this family prints the DRV rows at 3000 pieces on a large reel, level 2 with a one year floor life, tin or nickel palladium gold depending on the row, marking QTN. The eight pin DRB body prints 3000 at level 1 with unlimited floor life and marking BZN, and the SOT-223 DCQ body prints 2500 at level 2. So the moisture level of the small WSON is the one that needs a floor life clock on the line, while the larger VSON does not.

The part also exists in two chip generations under one code, as the whole TPS737 family does, and the difference on this body is the same as on the others: overall accuracy 3 percent against 1.5 percent, dropout 130 mV against 122 mV, and full load ground current 1300 microamp against 880 microamp. The reel label does not separate them.

Where this part fits

Dense point of load rails on network attached storage, rack servers, network interface cards and merchant power supplies use this body when the board has no room for a SOT-223 tab. The cross reference notes for the family are under power management cross reference, and the receipt plan that catches a chip generation change on an incoming reel is in incoming inspection plan.

Before a purchase order, and the questions that come up

Check the dissipation first. The headline 1 A is an electrical rating and the body is the limit. At 1.2 V out from a 3.3 V input the part burns 2.1 W and needs a copper area that a 2 mm by 2 mm package does not have; at 300 mA the same rail burns 0.63 W and is a normal application. A customer asking for the full amp in this body should be shown the numbers rather than sold the part and left to find out.

Is the SOT-223 member a drop in replacement? No. The pin count, the pad and the footprint are different, so it is a board revision even though the die is the same.

What happens with no output capacitor at all? The part is specified with one microfarad or larger and the transient curves are taken at that value. It will usually run without one, and the load step response will be visibly worse, which is not a specification.

Does the enable pin have an internal pull up? No. It needs to be driven, and it can be tied to the input when shutdown is not used, with the reverse current caveat that the document describes for that connection.