Contact Us

TPS73518QDRBRQ1

Brand: Texas Instruments
Texas Instruments TPS73518QDRBRQ1 is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS73518QDRBRQ1 — Power Management & Signal Chain | Superb Automation

TPS73518QDRBRQ1

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS73518QDRBRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS73518QDRBRQ1 automotive 1.8 V rail

The TPS73518QDRBRQ1 is the automotive qualified 1.8 V member of the TPS735-Q1 family, a 500 mA regulator that runs from 2.7 V to 6.5 V and draws 46 microamp of ground current. The Q1 suffix means AEC-Q100 grade 1, which is minus 40 to 125 degree ambient, with human body model classification level 2 and charged device model class C4B, and the part is built in the same eight pin SON as the industrial member of the family.

The electrical content is almost identical to the industrial part: 68 dB of rejection at 1 kHz, 13.2 microvolt RMS of noise, 280 mV of typical dropout at 500 mA, 45 microsecond startup and 2 percent accuracy over load, line and temperature. What changes is the documentation package and the moisture level, and on this order code the moisture level is the item a production line has to plan around, because the automotive row is published at level 3 with a 168 hour floor life while the industrial member of the same body is published at level 1 with unlimited floor life.

Key parameters from the SBVS252B document

QualificationAEC-Q100 grade 1, minus 40 to 125 degree ambient, HBM level 2, CDM class C4B
Input range2.7 V to 6.5 V
Output1.8 V fixed, family covers 1 V to 4.3 V fixed and 1.25 V to 6 V adjustable
Current500 mA continuous
Accuracy2 percent over load, line and temperature above 2.2 V output
Dropout280 mV typical at 500 mA
Ground current46 microamp typical
Rejection68 dB at 1 kHz
Noise13.2 microvolt RMS with a noise reduction capacitor
PackageDRB eight pin SON, 3 mm by 3 mm, marking 518DRB
Moisture levelLevel 3 at 260 degrees, 168 hour floor life, tin plating
Order codeTPS73518QDRBRQ1 active, 3000 pieces on a large reel

Level 3 floor life is a line planning item

A level 3 part absorbs enough moisture in 168 hours of open air that a single reflow pass can crack the body. The industrial member of this family ships at level 1 with unlimited floor life, so a line that is used to the industrial part will leave a reel on the machine for a week without thinking about it. The automotive reel needs either a dry cabinet or a bake before it goes back on the line, and the bake itself is a handling step that a small line may not have.

The second difference is the order code status. The addendum carries two rows for this string, the plain row and a .B row, both active at 3000 pieces on a large reel and both marked 518DRB. There is no .A row printed for this code, which is the reverse of what most of this family shows, and a distributor search that filters on the .A suffix will return nothing and may report the part as unavailable.

Where this part fits

Automotive infotainment, telematics units, camera modules and body controllers use this rail for a 1.8 V sensor or memory supply that has to survive load dump transients through its upstream protection. Our component notes for automotive grade sourcing are under OEM procurement, and the checks we run on automotive receipts, including moisture level and date code, are in date code management.

What to check before a purchase order

Check the floor life against the storage the reel will see. If the part arrives at a contract assembly house that has no dry cabinet, the level 3 rating becomes a per reel bake cost, and that cost belongs in the comparison against a competitor part rated at level 1. It is a real number on a production order and it does not appear in the unit price. On a run of a few hundred boards the bake can add a day to the schedule as well, because the reel has to come out of the cabinet, go through a controlled ramp and cool before it can be loaded.

Check the input transient path. The regulator itself is rated to 6.5 V and an automotive 12 V bus with load dump is far above that, so the protection in front of it is what makes this part usable. A board that clamps at 20 V still leaves a window where the regulator sees more than its absolute maximum if the clamp is slow.

Questions that come up on this part

Is the industrial member of the family an acceptable substitute in a non automotive application? Electrically yes, and it is cheaper and easier to handle at level 1. The board should not carry a Q1 code in its bill of materials unless the qualification is required, because the automotive row costs more and constrains the line.

Does the 46 microamp ground current hold over temperature? The typical figure is at 25 degrees; the maximum in the family table is higher and has to be used for a standby budget, in the same way as the industrial member.