TPS71718QDRVRQ1
Product Specifications
TPS71718QDRVRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The TPS71718QDRVRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TPS71718QDRVRQ1 automotive 1.8 V low noise regulator
The TPS71718QDRVRQ1 is the 1.8 V member of the TPS717-Q1 family, the automotive qualified version of the TPS717 regulator. It is AEC-Q100 grade 1, specified from minus 40 to plus 125 degrees ambient, with HBM classification level 2 and CDM classification C4B. Electrically it is the same part as the industrial TPS717: 150 mA, 2.5 V to 6.5 V input, 170 mV dropout at 150 mA, 70 dB rejection at 1 kHz, and 30 microvolts RMS of noise.
The automotive suffix matters for two reasons. The first is the temperature range, which covers an engine bay or a dashboard that sits in the sun. The second is the qualification record: a module that goes into a vehicle needs the AEC-Q100 document behind the part, and a grade 1 part in the DRV body is what an infotainment or ADAS module is expected to carry.
The body is the DRV, a six pin WSON of 2 mm by 2 mm with a thermal pad. The Q1 family also ships in the SC70 five pin and in the DSE body of 1.5 mm by 1.5 mm, so a module can be built in the smallest body the thermal budget allows.
Key parameters from the SLVSBM4C document
| Qualification | AEC-Q100 grade 1, minus 40 to plus 125 degrees ambient |
| ESD | HBM level 2 and CDM level C4B |
| Input range | 2.5 V to 6.5 V |
| Output | 1.8 V fixed on this order code, fixed rows from 0.9 V to 5 V |
| Output current | 150 mA |
| Dropout | 170 mV typical at 150 mA |
| PSRR | 70 dB at 1 kHz, 67 dB at 100 kHz, 45 dB at 1 MHz |
| Noise | 30 microvolts RMS from 100 Hz to 100 kHz |
| Ground current | 45 microamps |
| Package | DRV six pin WSON, 2 mm by 2 mm, with a thermal pad |
| Order code | TPS71718QDRVRQ1, large reel, active in the vendor addendum |
What the automotive grade adds to the evaluation
A grade 1 part is specified over a wider ambient range than the industrial version, and the electrical table gives the parameters that are guaranteed over that range rather than only at 25 degrees. For a 1.8 V rail that feeds a camera sensor or a PLL, the parameters that matter over temperature are the accuracy band and the rejection, because a sensor's own tolerance is usually tight and the module has to hold it from a cold start to a hot soak.
An automotive module also has to hold its rail through a cold crank, where the input drops before it recovers, and the electrical table is what tells the buyer how far that dip can go before the rail follows it. The qualification also fixes the change control. A supplier that ships a different die under the same automotive order code is a supplier that has broken the qualification record, so the purchasing side of an automotive programme asks for the qualification document with the shipment rather than taking a family name on trust.
Where this part fits
ADAS camera modules, infotainment head units, instrument clusters, radar sensor boards and any automotive module that has a sensor or a PLL on a 1.8 V rail. The low noise and the wide rejection band are what make it usable behind a switching converter in a module where the harness carries load dump transients. Notes on keeping an automotive bill of materials traceable are under power management cross reference, and the receipt checks for a qualified part are in incoming inspection plan.
What to check before a purchase order
Check that the order code carries the Q1 suffix and the DRV body together. The automotive family ships in three bodies, and a line that was qualified on one body cannot move to another without a reflow and thermal check, even though the die is the same. A purchase order that names only the family and the voltage will get whatever body the distributor has.
Check the input against the 6.5 V limit. An automotive rail with a load dump can exceed that, so the regulator needs a protected upstream node or a series element; the 6.5 V limit is an operating limit, not a transient rating. Also check the thermal pad area against the ambient the module sees, since a 150 mA load at 170 mV is small but the surrounding converter may not be.
Questions that come up on this part
Is this the same die as the industrial TPS717? The electrical table matches the industrial part, and the difference is the qualification and the guaranteed temperature range.
Can it be used outside a vehicle? Yes, and the grade 1 range is useful in any equipment that sees a wide ambient, but the automotive documentation adds cost that a non automotive product does not need.