Contact Us

TPS71709DSER

Brand: Texas Instruments
Texas Instruments TPS71709DSER is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS71709DSER — Power Management & Signal Chain | Superb Automation

TPS71709DSER

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS71709DSER from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS71709DSER 0.9 V low noise regulator in a 1.5 mm body

The TPS71709DSER is the 0.9 V member of the TPS717 family, a 150 mA low dropout regulator built for supplies that have to be quiet. It runs from 2.5 V to 6.5 V, rejects 70 dB at 1 kHz, 67 dB at 100 kHz and 45 dB at 1 MHz, and puts out 30 microvolts RMS of noise over the 100 Hz to 100 kHz band. The 0.9 V output makes it the rail for a core, a sensor or a reference that cannot tolerate the ripple a switching converter leaves behind.

Ground current is 45 microamps, which is high for a battery product and deliberate for this class of part: the current buys the loop bandwidth that produces the rejection figures. Dropout is 170 mV typical at 150 mA, and the worst case accuracy is 3 percent over load, line, process and temperature.

The body on this order code is the DSE, a six pin WSON of 1.5 mm by 1.5 mm with a thermal pad. The family also ships in the SC70 five pin and in a 2 mm by 2 mm WSON, so a board can trade thermal performance against area without changing the electrical table.

Key parameters from the SBVS068I document

Input range2.5 V to 6.5 V
Output0.9 V fixed on this order code, fixed rows from 0.9 V to 5 V, adjustable to 6.2 V
Output current150 mA
Dropout170 mV typical at 150 mA
PSRR70 dB at 1 kHz, 67 dB at 100 kHz, 45 dB at 1 MHz
Noise30 microvolts RMS from 100 Hz to 100 kHz
Ground current45 microamps
Accuracy3 percent worst case over load, line, process and temperature
Output capacitor1 microfarad ceramic, stable across the range
PackageDSE six pin WSON, 1.5 mm by 1.5 mm, with a thermal pad
Order codeTPS71709DSER, large reel, active in the vendor addendum

What the noise and rejection figures mean in practice

A 0.9 V rail is usually a core rail or a reference, and both of those care about what rides on the rail. The 30 microvolt figure is measured over a 100 Hz to 100 kHz band, which covers the switching ripple of a converter running at 1 MHz only at its lower harmonics; the 45 dB rejection at 1 MHz is what deals with the switching frequency itself. A board that puts this regulator after a 2 MHz converter therefore gets the rejection at 1 MHz rather than the noise figure, and the two numbers belong together in the evaluation.

The 45 microamp ground current is the price of that loop. On a product that spends most of its life asleep, the difference between 45 microamps and 1 microamp is the difference between a month of standby and a year, so the part belongs on the rail that is switched off in sleep rather than on the always-on rail.

Where this part fits

Camera sensor supplies, PLL and VCO rails, wireless LAN and Bluetooth front ends, audio codecs and precision references. The 0.9 V row is used where a digital core has to be fed from a 3.3 V or 5 V rail with very little noise, and where the core cannot tolerate the ripple of a buck converter without a second stage. Notes on putting a linear stage after a switching converter sit under power management cross reference, and the checks for a part in this small a body are in incoming inspection plan.

What to check before a purchase order

Check the thermal pad. The DSE body of 1.5 mm by 1.5 mm carries 150 mA at a dropout of 170 mV, which is only 26 mW, so the pad is not the limit here; what the pad does is set the thermal coupling to the board, which matters when the regulator sits next to a converter that heats the copper. A pad left unsoldered changes the temperature the part sees without changing any electrical figure.

Check the input capacitor against the source. The rejection figures assume a low impedance source at the input, and a long trace from a converter output to this regulator turns that trace into an inductor that spoils the rejection above a few hundred kilohertz. The input capacitor belongs at the pin, not at the converter.

Check the accuracy band against the load. Three percent on 0.9 V is plus or minus 27 mV, and a core that specifies plus or minus 3 percent of 0.9 V is exactly at the limit, so there is no room for trace drop or for the tolerance of the load's own reference.

Questions that come up on this part

Is this a good choice for an always-on rail? Only if the standby budget can carry 45 microamps. For a coin cell product the answer is no, and a lower quiescent part with worse rejection is the right trade.

Does the 0.9 V row need a minimum load for stability? No. The family is stable from no load, which is what allows it to sit on a core rail that sleeps.